Abstract
In robot motion planning, generating trajectories that are both computationally efficient and physically feasible remains a significant challenge. While generative models like diffusion have shown promise in learning complex motion priors, they often suffer from slow inference speeds and produce "jerky" trajectories that neglect high-order dynamics. We present FlowMP, a motion planning framework based on Conditional Flow Matching (CFM). By explicitly modeling second-order dynamics and leveraging the efficiency of flow matching, FlowMP generates smooth, collision-free trajectories significantly faster than diffusion-based alternatives. Our experiments across 2D and 3D environments, as well as real-world robot deployments, demonstrate that FlowMP achieves a 100% success rate on long-horizon tasks and operates at sub-0.1 second inference speeds.
Introduction
For a robot to navigate from an initial state to a goal, the resulting path must be more than just a geometric line; it must be a physically executable trajectory. Traditional motion planning has long grappled with a "Goldilocks" problem. Optimization-based methods, such as CHOMP, provide precision but are prone to getting trapped in local minima. Conversely, sampling-based methods like RRT are robust but often produce jagged paths that require extensive post-processing to smooth.
Recent advancements in generative AI have introduced diffusion models as a way to learn motion priors from expert data. However, these models are computationally expensive due to their iterative denoising process and typically only model first-order dynamics (position and velocity). This often results in trajectories with sudden changes in acceleration—mathematically valid in a vacuum, but physically damaging or impossible for real-world robot hardware. FlowMP addresses these limitations by replacing diffusion with Conditional Flow Matching and incorporating acceleration-aware learning.
The FlowMP Framework
1. Conditional Flow Matching (CFM)
FlowMP shifts the generative paradigm from diffusion to CFM. Unlike diffusion models, which require a complex forward-noising process and many steps to recover a signal, CFM learns a continuous vector field (a motion field) that directly maps a simple noise distribution to the target trajectory distribution. This "simulation-free" training is more stable and allows for high-quality trajectory sampling in significantly fewer steps using standard ODE solvers like the 4th-order Runge-Kutta integrator.
2. Second-Order Dynamics and Smoothness
A critical innovation in FlowMP is the explicit modeling of higher-order physics. Instead of merely predicting a sequence of positions, the model is trained to learn velocity, acceleration, and jerk fields simultaneously. This ensures $C^2$ continuity, meaning the acceleration of the robot arm does not jump instantaneously. By treating acceleration as a core component of the learning process, the model develops an inherent "understanding" of the physical effort required for movement, acting as a natural regularizer against erratic motions.
3. B-Spline Representation
To maintain computational efficiency while ensuring geometric smoothness, FlowMP represents trajectories as B-splines. The model learns to manipulate the "via-points" (control points) of these splines. This representation naturally enforces a degree of smoothness and reduces the dimensionality of the planning problem, making it easier for the model to scale to complex, high-degree-of-freedom (DOF) robots.
Experimental Evaluation
The researchers evaluated FlowMP across three increasingly complex environments:
- RobotPointMass (2D): A 2D maze navigation task requiring the avoidance of cluttered obstacles.
- PandaSphere (3D): A simulated 7-DOF Franka Emika Panda robot arm navigating a 3D workspace with spherical obstacles.
- Real-Robot Deployment: Testing on a Kinova Gen3 7-DOF manipulator to validate the physical feasibility of the generated trajectories in real-world settings.
Key Results and Insights
Superior Speed and Efficiency
FlowMP demonstrated remarkable inference speeds, achieving sub-0.1 seconds for 2D tasks and approximately 0.13 seconds for complex 3D planning. This represents a 2x speedup over state-of-the-art diffusion-based planners (such as MPD). Furthermore, the model is highly compact, requiring only 4.5 MB of parameters, which facilitates deployment on edge-computing robot controllers.
Robustness in Long-Horizon Planning
A significant finding was FlowMP's performance on long trajectories. While diffusion-based models often experience "mode collapse" or failure when planning for extended horizons (e.g., 256 steps), FlowMP maintained a 100% success rate. This stability is attributed to the continuous nature of the flow matching objective, which handles long-range dependencies more effectively than iterative denoising.
Physical Feasibility
Quantitative metrics confirmed that FlowMP's trajectories were significantly smoother than those produced by first-order models. By minimizing point-to-point slope variance through its acceleration-aware training, FlowMP produces motions that are ready for immediate execution on hardware without the need for additional smoothing layers.
Conclusion and Future Work
FlowMP represents a significant step forward in making generative motion planning practical for real-world robotics. By combining the efficiency of Conditional Flow Matching with a deep integration of second-order dynamics, it provides a fast, smooth, and robust alternative to existing diffusion models.
Future research will focus on reducing the dependency on "expert" data (currently generated via CMA-ES) and extending the framework to handle dynamic environments with moving obstacles. Additionally, integrating raw sensory inputs, such as point clouds or RGB-D data, directly into the flow matching process could pave the way for a truly end-to-end, vision-based motion planning system.
Summary updated