FLOAT: Fatigue-Aware Design Optimization of Floating Offshore Wind Turbine Towers

João Alves Ribeiro, Francisco Pimenta, Bruno Alves Ribeiro, S. Tavares, Faez Ahmed

TL;DR

The FLOAT framework introduces a computationally efficient pipeline for designing floating offshore wind turbine (FOWT) towers that can actually survive the high-fatigue environment of the open ocean. By combining probabilistic sampling with a lightweight analytical fatigue estimator, the researchers redesigned the IEA 22 MW reference tower, extending its predicted fatigue life from a meager 9 months to a robust 25 years.

What Problem Does This Paper Address?

As offshore wind turbines scale up to massive 22 MW capacities, their towers must support heavier nacelles and longer blades while enduring the complex, coupled forces of wind and waves. In floating configurations, platform motion significantly amplifies these "fatigue loads"—the repetitive stresses that eventually cause structural failure.

The industry faces a massive computational bottleneck: standard fatigue evaluation requires millions of high-fidelity Aero-Hydro-Servo-Elastic (AHSE) simulations to cover every possible combination of wind and sea states. This makes iterative design optimization—where a computer tries thousands of different tower shapes to find the lightest one—prohibitively expensive and slow. Consequently, many current reference models (like the IEA 22 MW) were designed for fixed-bottom conditions and lack a validated, fatigue-driven design for floating use.

Methods

The authors propose FLOAT (Fatigue-aware Lightweight Optimization and Analysis for Towers), which breaks the bottleneck using three main pillars:

  1. Probabilistic Wind–Wave Sampler: Instead of simulating every possible "bin" of environmental conditions, FLOAT uses a Monte Carlo-based approach to select a representative subset of ~6,500 simulations. This reduces the simulation requirement by orders of magnitude while maintaining statistical accuracy.
  2. Lightweight Fatigue Estimator: This is the "secret sauce" for optimization. Instead of running a full 10-minute simulation every time the optimizer tweaks the tower's thickness, FLOAT uses an analytical surrogate model. It scales fatigue damage based on geometric changes (radius and thickness) relative to a calibrated baseline, allowing for near-instantaneous damage estimation during the design loop.
  3. HPC and Platform Calibration: The framework leverages cloud-based High-Performance Computing (HPC) to run simulations in parallel. It also introduces a pitch/heave-platform calibration method to ensure the floating platform reaches static equilibrium under mean loads, improving simulation fidelity.

Datasets

The study utilizes and builds upon the IEA 22 MW Reference Wind Turbine, a state-of-the-art benchmark for the next generation of offshore wind.

  • Baseline: The original IEA 22 MW tower (designed for fixed-bottom).
  • New Benchmark: The authors introduce the FLOAT 22 MW FOWT tower, the first publicly available redesign of this model specifically optimized for fatigue in floating conditions.
  • Validation Set: A dataset of 6,468 high-fidelity OpenFAST simulations was generated to validate the final design.

Key Insights and Ideas

  • The "9-Month" Wake-up Call: The most striking insight is that the standard IEA 22 MW tower, if deployed on a floating platform without modification, would likely reach its fatigue limit in just 9 months. This highlights the critical need for fatigue-aware design in the upscaling era.
  • Conservative Surrogates: The lightweight fatigue estimator isn't just fast; it’s intentionally conservative. It showed a mean relative error of -8.6% compared to high-fidelity runs, meaning it slightly overestimates damage—a desirable trait for ensuring structural safety.
  • Resonance Avoidance: By shifting the tower's first natural frequency (moving from a "soft-stiff" to a "stiff-stiff" design), the researchers successfully moved the structure's vibration modes away from the rotor's 3P harmonic (the frequency at which blades pass the tower), drastically reducing fatigue accumulation.

Key Results

  • Life Extension: The optimized tower achieved a 25-year fatigue life, up from the ~9-month baseline.
  • Mass Trade-off: To survive 25 years, the tower mass increased by 68.8% (from 1,574 to 2,656 tonnes). While heavier, the authors demonstrate this is the "lowest-mass fatigue-compliant" configuration within their design space.
  • Computational Speedup: By using cloud HPC (250 instances), the team completed the 6,468 simulations in just 12.6 hours. Sequentially, this would have taken 124 days—a 250x speedup.
  • Cost Efficiency: The total cloud computing cost for the entire validation suite was only ~$47, proving that high-fidelity offshore design is accessible without massive in-house server farms.

Limitations and Future Work

The authors acknowledge several areas for expansion:

  • Scope of Load Cases: This study focused on DLC 1.2 (normal power production). Future iterations should include extreme sea states, faults, and start-up/shut-down cycles (DLCs 1.1, 2.4, etc.).
  • Environmental Complexity: The current model assumes aligned wind and waves. Real-world "misaligned" conditions (where wind and waves come from different directions) add complexity that FLOAT is designed to handle but hasn't yet fully explored in this case study.
  • Material Innovation: The study used standard steel. Future work could integrate high-strength steels or localized reinforcements to further reduce the mass of the fatigue-resistant design.

Reference: Ribeiro, J. A., et al. (2026). FLOAT: Fatigue-Aware Design Optimization of Floating Offshore Wind Turbine Towers. arXiv:2601.01657v1.

Summary updated

Abstract

Upscaling is central to offshore wind's cost-reduction strategy, with increasingly large rotors and nacelles requiring taller and stronger towers. In Floating Offshore Wind Turbines (FOWTs), this trend amplifies fatigue loads due to coupled wind-wave dynamics and platform motion. Conventional fatigue evaluation requires millions of high-fidelity simulations, creating prohibitive computational costs and slowing design innovation. This paper presents FLOAT (Fatigue-aware Lightweight Optimization and Analysis for Towers), a framework that accelerates fatigue-aware tower design. It integrates three key contributions: a lightweight fatigue estimation method that enables efficient optimization, a Monte Carlo-based probabilistic wind-wave sampling approach that reduces required simulations, and enhanced high-fidelity modeling through pitch/heave-platform calibration and High-Performance Computing execution. The framework is applied to the IEA 22 MW FOWT tower, delivering, to the authors' knowledge, the first fatigue-oriented redesign of this benchmark model: FLOAT 22 MW FOWT tower. Validation against 6,468 simulations shows that the optimized tower extends the estimated fatigue life from 9 months to 25 years while avoiding resonance, and that the lightweight fatigue estimator provides conservative predictions with a mean relative error of -8.6%. Achieving this lifetime requires increased tower mass, yielding the lowest-mass fatigue-compliant design. All results and the reported lifetime extension are obtained within the considered fatigue scope (DLC 1.2, aligned wind-wave conditions). By reducing simulation requirements by orders of magnitude, FLOAT enables reliable and scalable tower design for next-generation FOWTs, bridging industrial needs and academic research while generating high-fidelity datasets that can support data-driven and AI-assisted design methodologies.
BibTeX
@misc{ribeiro2026float,
  author = {João Alves Ribeiro and Francisco Pimenta and Bruno Alves Ribeiro and S. Tavares and Faez Ahmed},
  title = {{FLOAT: Fatigue-Aware Design Optimization of Floating Offshore Wind Turbine Towers}},
  year = {2026},
  eprint = {2601.01657},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2601.01657},
}
Figure