Abstract
Underwater robotic manipulation faces significant challenges due to high hydrostatic pressure, object diversity, and dynamic environmental conditions. This paper introduces a novel fish-mouth-inspired origami gripper that utilizes the Yoshimura crease pattern to convert a simple 1-DOF pulling motion into a complex 3D grasp. By combining structural robustness with compliant mechanics, the gripper successfully performs diverse tasks ranging from delicate biological sampling to scooping buried objects. Experimental validation in real-world underwater settings demonstrates the gripper's versatility and reliability.
Introduction
Underwater manipulation is a "hard problem" in robotics. Traditional finger-based hands designed for terrestrial use often fail in the ocean due to the difficulty of sealing complex electronic and hydraulic components against high pressure. Furthermore, marine targets vary wildly in physical properties—from extremely fragile jellyfish to heavy, irregular crabs and buried shellfish. While soft robotics offers a solution for delicacy, many soft actuators struggle to maintain structural integrity under deep-sea pressure. This research seeks a "middle ground": a mechanically simple, non-finger-based gripper that is robust enough for the deep but gentle enough for biology.
Bio-Inspired Design and Mechanism
The researchers looked to the mechanics of fish mouths, which interact effectively with their environment without the use of digits. The resulting "ODO gripper" is based on the Yoshimura crease pattern, an origami geometry known for its buckling properties in thin-walled cylinders.
As illustrated in Figure 1, applying a uniaxial pulling force causes the structure to collapse inward in a controlled, "mouth-like" motion. This single-degree-of-freedom (1-DOF) actuation drastically simplifies the control system and waterproofing requirements, as the entire grasping action is baked into the geometry of the folds.
Methods and Fabrication
To ensure durability in harsh environments, the authors developed a "Composite Material Printing" process. They utilized a flexible base layer (such as fabric or PET) for the creases and 3D-printed a thermoplastic reinforcement layer onto the facets. This creates a structure that is rigid where necessary but flexible at the joints.
The team employed geometric modeling to simulate how varying the crease angle ($\alpha$) and crease length ($L$) affects the opening angle ($\theta$) and force transmission (Figure 2). Their analysis revealed that these parameters are highly tunable; for instance, a crease angle near 28.5° provides the highest sensitivity for precise pinch grasping.
Experimental Results
The prototype was validated through both controlled lab tests and field deployments near Pattaya Island, successfully completing over 300 underwater grasping tasks. Despite its simple 1-DOF motion, the gripper demonstrated four distinct grasping modes:
- Wrap Grasping: Enveloping small, delicate targets.
- Pinch Grasping: Using edges for precise contact.
- Scooping: Utilizing the internal chamber to collect buried items while allowing sand to pass through air holes.
- Simultaneous Grasping: Capturing multiple objects in a single motion.
In biological safety tests, the gripper handled delicate jellyfish without applying damaging contact pressure, thanks to the compliant nature of the origami facets. In pull-out tests, the structure showed increased robustness as object size increased, indicating that the origami geometry effectively "locks" around larger volumes.
Conclusion and Future Work
The fish-mouth-inspired origami gripper provides a robust and versatile solution for underwater manipulation. By reducing mechanical complexity to a single degree of freedom, the design minimizes failure points while maintaining high performance across diverse tasks. Future research will explore advanced materials for enhanced pressure resistance and the integration of sensors for autonomous target detection and grasping.
Summary updated