Abstract
The first integrated implosion experiment of a three-axis cylindrical hohlraum (TACH) was successfully conducted at the SGIII laser facility. By quasi-symmetrically injecting 24 laser beams into the TACH, a highly symmetric radiation field was generated, reaching a peak radiation temperature of approximately 190 eV. This radiation field drove a deuterium-gas-filled capsule to a neutron yield of $\sim10^9$, with a yield over clean (YOC) of $\sim40\%$ at a convergence ratio (Cr) of $\sim17$. X-ray self-emission imaging revealed a nearly round imploded core, and laser backscatter remained below 1.25%. These results demonstrate the TACH's robust symmetry and favorable laser-plasma interaction characteristics, positioning it as a viable alternative for future inertial confinement fusion (ICF) research.
Introduction
In the pursuit of indirect-drive Inertial Confinement Fusion (ICF), achieving high radiation symmetry is paramount. Traditional cylindrical hohlraums, while standard, often suffer from complex laser-plasma instabilities (LPI) and crossed-beam energy transfer (CBET) due to their multi-ring laser configurations. Spherical hohlraums with six holes offer superior natural symmetry but are difficult to integrate with the fixed beam geometries of existing laser facilities. This paper presents the first integrated test of the Three-Axis Cylindrical Hohlraum (TACH), a novel "six-hole" geometry designed to bridge the gap between the symmetry of spherical designs and the practical advantages of cylindrical ones.
Experimental Design and Methods
The TACH is constructed by orthogonally joining three cylinders to form a cube-like structure with six laser entrance holes (LEHs). This configuration allows for a more uniform distribution of laser energy on the hohlraum walls compared to traditional two-hole designs.
The experiment was performed at the SGIII laser facility using 24 frequency-tripled (0.35 $\mu$m) laser beams. A total energy of approximately 46 kJ was delivered in a 2.5 ns square pulse. The TACH target consisted of a gold cube (3.2 mm side length) with three 1.4 mm diameter holes. At its center, a 630 $\mu$m diameter plastic capsule (Si-doped CH) filled with deuterium gas was placed. Diagnostics included Flat X-ray Detectors (FXRDs) and the Shock Wave Technique (SWT) for radiation temperature, pin-hole cameras for core symmetry, and scintillators for neutron yield.
Results and Discussion
The experiment achieved a peak radiation temperature of $\sim190$ eV inside the hohlraum. A key finding was the robustness of the radiation symmetry; despite minor beam pointing errors (up to 80 $\mu$m RMS), the imploded core remained nearly round, with spherical harmonic asymmetry components below 5%. This suggests the TACH geometry is inherently forgiving of alignment variations.
Furthermore, the TACH demonstrated favorable laser-plasma instability (LPI) behavior. The backscatter fraction was remarkably low, at less than 1.25%. The laser interaction in the TACH mimics the "outer ring" beams of traditional cylinders, which are generally more stable and efficient than the "inner ring" beams that often cause symmetry issues in standard designs. Additionally, the TACH geometry naturally separates laser-ablated "gold bubbles" from the capsule, preventing them from interfering with the implosion process.
The quantitative performance of the implosion is summarized in the table below:
As shown, the neutron yield reached $\sim1.1 \times 10^9$ with a YOC of approximately 40% at a convergence ratio of $\sim17$. These values indicate a high-quality implosion relative to theoretical 1D "clean" simulations, confirming that the TACH can maintain high performance under significant compression.
Conclusion
This first integrated experiment successfully demonstrated the major performance characteristics of the Three-Axis Cylindrical Hohlraum. The TACH provides a robustly symmetric radiation environment with low laser backscatter, making it a promising candidate for high-gain ICF. Future work will focus on scaling the design to higher convergence ratios (30–40) required for ignition and managing factors like hydrodynamic mixing and M-band radiation preheating.
Summary updated