Field Teams Coordination for Earthquake-Damaged Distribution System Energization

Ilker Isik, Ebru Aydin Gol

Abstract

Restoring power distribution systems following seismic events is a critical task complicated by infrastructure damage uncertainty and the logistical constraints of field team deployment. This paper proposes a Markov Decision Process (MDP) framework designed to coordinate field teams for optimal system re-energization. By incorporating probabilistic failure models and realistic travel times, the framework identifies restoration policies that minimize total customer "dark time." To overcome the computational challenges of large-scale grids, the authors implement several state-space reduction techniques, including action pruning and symmetry exploitation, resulting in up to a 117x improvement in execution time.

The Restoration Challenge

When an earthquake strikes, electrical distribution systems often undergo a complete blackout as protective circuit breakers trip. Restoring power—a process known as a "black-start"—is a complex puzzle: a component can only be energized if there is a functional, energized path back to a power source.

The challenge is twofold. First, there is significant uncertainty; the actual status of components (functional vs. damaged) is often unknown until a field team arrives to inspect and operate them. Second, logistics play a major role. Most existing research assumes remote-control restoration, but in reality, the time it takes for field teams to drive between substations is a primary bottleneck. Coordinating multiple teams to minimize total outage time is a massive combinatorial problem.

MDP Framework and Optimization

The authors model the restoration process as a Markov Decision Process (MDP). The state space includes the distribution system's status (energized, damaged, or unknown) and the current locations or travel status of the field teams. Failure probabilities for each bus are derived from fragility curves and Peak Ground Acceleration (PGA) data from the earthquake.

Figure 4: A snapshot of the distribution system state, showing energized nodes (green), a damaged node (red), and field teams (markers) positioned at specific buses.

To prevent "state-space explosion," the paper introduces several performance optimizations:

  • Reduced MDP: The model skips over deterministic time steps where teams are merely driving, jumping straight to "decision points" like arrivals or energization attempts.
  • Action Elimination: Non-optimal actions, such as sending a team to a bus when another team could arrive sooner, are pruned.
  • Symmetry Exploitation: Since field teams are generally identical, the model ignores different permutations of the same team-to-bus assignments to save memory.
  • The "Drive-By" Rule: If a team is driving from point A to point B and passes an unknown bus C, they are instructed to stop at C first. This costs zero extra travel time and potentially speeds up restoration.

Results and Scalability

The framework was evaluated using synthetic benchmarks based on real-world topologies, including the WSCC 9-bus and IEEE-123 systems. The optimization techniques reduced the state count by a factor of 91 and execution time by up to 117x compared to a naive MDP approach.

Figure 5: Illustration of field team coordination and travel paths (orange arrows) between nodes during the restoration process.

For very large grids, the authors employed a partitioning approach, dividing the network into smaller, independent zones. While this can lead to sub-optimal strategies compared to a global solution, it maintains scalability for massive networks. The experiments also highlighted "diminishing returns" for adding field teams; for instance, in a 9-bus system, moving from one to two teams significantly cut restoration time, but a third team provided only marginal benefits.

Conclusion and Future Work

This research provides a robust foundation for automated, coordinated power restoration. While the current model assumes deterministic travel times, future work will explore stochastic travel to account for earthquake-related road damage. Additionally, the authors suggest that Deep Reinforcement Learning may eventually replace manual partitioning for handling even larger, more complex power grids.

Summary updated

Abstract

The re-energization of electrical distribution systems in a post-disaster scenario is of grave importance as most modern infrastructure systems rely heavily on the presence of electricity. This paper introduces a method to coordinate the field teams for the optimal energization of an electrical distribution system after an earthquake-induced blackout. The proposed method utilizes a Markov Decision Process (MDP) to create an optimal energization strategy, which aims to minimize the expected time to energize each distribution system component. The travel duration of each team and the possible outcomes of the energization attempts are considered in the state transitions. The failure probabilities of the system components are computed using the fragility curves of structures and the Peak Ground Acceleration (PGA) values which are encoded to the MDP model via transition probabilities. Furthermore, the proposed solution offers several methods to determine the non-optimal actions during the construction of the MDP and eliminate them in order to improve the run-time performance without sacrificing the optimality of the solution.
BibTeX
@article{isik2024field,
  author = {Ilker Isik and Ebru Aydin Gol},
  title = {{Field Teams Coordination for Earthquake-Damaged Distribution System Energization}},
  journal = {Reliab. Eng. Syst. Saf.},
  year = {2024},
  doi = {10.1016/j.ress.2024.110050},
}
Figure