Fano Resonant Optical coatings platform for Full Gamut and High Purity Structural Colors

Mohamed ElKabbash, Nathaniel Hoffman, Andrew R Lininger, Sohail A. Jalil, Theodore P. Letsou, Michael Hinczewski, Giuseppe Strangi, Chunlei Guo

Abstract

Structural coloring is a photostable and environmentally friendly coloring approach that harnesses optical interference and nanophotonic resonances to obtain colors with a range of applications including steganography, décor, data storage, and anticounterfeiting measures. We show that optical coatings exhibiting the photonic Fano Resonance is an ideal platform for structural coloring -- it provides full color access, high color purity, high brightness, controlled iridescence, and scalable manufacturability. We show that an additional oxide film deposited on Fano resonant optical coatings (FROCs) increases the color purity (up to 97%) and color gamut coverage range (> 99% coverage of the sRGB and Adobe color spaces). For coloring applications that do not require high spatial resolution, FROCs provide a significant advantage over existing structural coloring schemes.

Introduction

Traditional coloring relies on pigments and dyes, which are prone to photobleaching under UV exposure and often involve toxic chemical synthesis. Structural color, derived from light interference at the nanoscale, offers a durable and eco-friendly alternative. However, a persistent challenge has been the trade-off between scalability and optical performance. Simple thin-film Fabry-Perot cavities are easy to manufacture but typically produce low-purity subtractive colors. Conversely, complex metasurfaces can achieve high purity and a wide gamut but require expensive, low-throughput nanolithography. This research introduces Fano Resonant Optical Coatings (FROCs) as a scalable solution that achieves near-perfect color purity and full gamut coverage.

The FROC Architecture and Methodology

The platform leverages Fano resonance, a physical phenomenon characterized by an asymmetric line-shape resulting from the coupling of a discrete narrowband resonance with a broad continuum. The researchers constructed a Metal-Dielectric-Metal (MDM) stack consisting of Silver (Ag) and Titanium Dioxide ($TiO_2$). The critical innovation was the addition of a 15 nm "lossy" dielectric layer of Germanium (Ge).

FROC architecture and spectral response compared to standard Fabry-Perot and narrowband filters.

As shown in Figure 1, the Ge layer acts as a broadband absorber that couples with the nanocavity's resonance. This transformation shifts the optical response from a broad subtractive dip to a sharp, additive-like reflective peak. To further enhance performance, a 50 nm Silicon Dioxide ($SiO_2$) capping layer was applied to suppress unwanted reflections at shorter wavelengths, effectively "cleaning" the spectrum. Fabrication was achieved using industrial-standard electron-beam evaporation and DC magnetron sputtering, ensuring scalability without the need for high-resolution lithography.

Results: Purity, Gamut, and Scalability

The FROC platform demonstrated exceptional optical characteristics. The team achieved a colorimetric purity of up to 97%, a significant improvement over traditional structural color methods. Furthermore, the coatings cover over 99% of the sRGB and Adobe RGB color spaces at specific viewing angles.

Experimental samples and CIE 1931 chromaticity diagram showing the expanded gamut of silica-capped FROCs.

Figure 3 illustrates the practical application of this technology. The researchers demonstrated a "printing" technique by selectively depositing the 15 nm Ge layer to create university logos (CWRU and U of R). The CIE 1931 chromaticity diagram in Figure 3d highlights how the silica-capped FROCs (red stars) significantly expand the reachable color space compared to standard Fabry-Perot filters (blue circles). Measured reflectance values between 0.63 and 0.85 ensure high brightness, making the colors vivid even in ambient lighting conditions.

Conclusion and Future Outlook

Fano Resonant Optical Coatings provide a powerful new tool for structural coloring, combining the high performance of nanophotonic structures with the low-cost scalability of thin-film deposition. While they offer lower spatial resolution than metasurfaces, they are ideally suited for large-area applications such as building facades, automotive coatings, and "self-colored" solar cells. Future work may involve replacing Germanium with materials like amorphous Silicon to integrate active electronic functionality directly into the decorative coatings.

Summary updated

Abstract

Structural coloring is a photostable and environmentally friendly coloring approach that harnesses optical interference and nanophotonic resonances to obtain colors with a range of applications including steganography, décor, data storage, and anticounterfeiting measures. We show that optical coatings exhibiting the photonic Fano Resonance is an ideal platform for structural coloring -- it provides full color access, high color purity, high brightness, controlled iridescence, and scalable manufacturability. We show that an additional oxide film deposited on Fano resonant optical coatings (FROCs) increases the color purity (up to 97%) and color gamut coverage range (> 99% coverage of the sRGB and Adobe color spaces). For coloring applications that do not require high spatial resolution, FROCs provide a significant advantage over existing structural coloring schemes.
BibTeX
@inproceedings{elkabbash2023fano,
  author = {Mohamed ElKabbash and Nathaniel Hoffman and Andrew R Lininger and Sohail A. Jalil and Theodore P. Letsou and Michael Hinczewski and Giuseppe Strangi and Chunlei Guo},
  title = {{Fano Resonant Optical coatings platform for Full Gamut and High Purity Structural Colors}},
  booktitle = {Nature Communications},
  year = {2023},
  url = {https://openreview.net/forum?id=tcJ0ztZBkC},
}
Figure