Exponentially Narrow Delay Interval Technique to Stability and Stabilization for Nonlinear Systems and Its Application to Truck-Trailer System

Bin Lü, Yufeng Tian, Yutong Liu, Yue Yang, Xiaojie Su, Linsong Zhang

Introduction

In control engineering, time delays are often referred to as "stability killers." Whether originating from sensor lag or actuator response times, these delays can cause nonlinear systems—where outputs are not directly proportional to inputs—to oscillate or fail. Managing these time-varying delays is particularly challenging in complex systems like a truck-trailer backing up.

To address this, researchers often employ Takagi-Sugeno (T-S) fuzzy models to approximate nonlinear systems through local linear rules. However, traditional "delay partitioning" methods, which divide the delay period into smaller segments for analysis, frequently suffer from high computational complexity or overly conservative results that limit controller efficiency.

The Exponentially Narrow Delay Interval Technique

This study introduces a novel "exponentially narrow delay interval" technique designed to partition time-varying delays more effectively. Unlike standard methods that divide intervals into equal parts, this approach uses a recursive formula governed by a single tunable parameter, $p \in [0, 1]$.

Extracted figure from page 7 of Exponentially Narrow Delay Interval Technique to Stability and Stabilization for Nonlinear Systems and Its Application to Truck-Trailer System

By adjusting $p$, researchers can "zoom in" on specific segments of the delay range $[d_0, d_2]$. This flexibility allows for a more precise characterization of the delay's behavior, making the optimization process significantly more computationally efficient than traditional multi-parameter partitioning schemes.

Mathematical Innovations: Parameter-type Reciprocally Convex Inequality

Beyond interval partitioning, the authors propose a new "parameter-type reciprocally convex inequality" to estimate the derivative of the Lyapunov-Krasovskii functional (LKF). Stability analysis typically relies on LKFs, but estimating their derivatives often involves mathematical "gaps" that lead to less precise bounds.

The introduced inequality utilizes pre-specified parameters ($v_1, v_2$) to provide tighter bounds. Crucially, it eliminates certain nonlinear constraints and "slack matrices" that typically increase the number of decision variables, thereby simplifying the resulting Linear Matrix Inequalities (LMIs) without sacrificing accuracy.

Application to the Truck-Trailer System

The proposed strategies were validated using a benchmark truck-trailer system, a three-state nonlinear model representing the angular difference between the truck and trailer, the trailer's angle, and its vertical position. The primary metric for success was the Maximum Admissible Upper Bound (MAUB)—the longest delay the system can withstand while remaining stable.

Key Results

  • Enhanced Delay Tolerance: With the tuning parameter set to $p=0.4$, the system achieved a MAUB of 276.7101. This represents a significant improvement over previous state-of-the-art results (e.g., 262.4908 from Lian et al., 2021).
  • Robust Stability: Simulations confirmed that the truck-trailer system successfully converged to a stable state even under oscillating, time-varying delays ($d(t) = 8 + 0.2 \sin(t)$), where older methods might have reached instability.

Conclusion and Future Work

The exponentially narrow delay interval technique provides a powerful "tuning knob" for control engineers, allowing them to utilize more information about delay behavior in real-time. While the parameter $p$ simplifies the optimization process, future research could focus on automating the selection of the optimal $p$ for specific systems. Additionally, moving from numerical simulations to physical hardware testing will be essential to evaluate the technique's performance against real-world noise and jitter.

Summary updated

Abstract

<title>Abstract</title> This study addresses the stability and stabilization challenges in nonlinear control systems with time-varying delays via fuzzy model theory. An exponentially narrow delay interval technique is introduced, facilitated by a single tunable parameter $p$, to equivalently transform the extensive delay period $[d_0, d_2]$ into a series of variable narrow subintervals, expressed as: $[d_{0},d_{2}]=\cup_{i=1}^{2^l}[d_{\frac{i-1}{2^{l-1}}},d_{\frac{i}{2^{l-1}}}]$. Diverging from traditional delay interval methods, this narrow delay interval approach simplifies the optimization process by characterizing each subinterval with just $d_0$, $d_2$, and $p$. The core advantage of integrating the narrow interval approach with fuzzy systems is its capability to accurately represent and manage the intrinsic uncertainty in time-varying delays, thus facilitating robust control in real-world scenarios. A parameter-type reciprocally convex inequality is introduced to estimate the derivative of the narrow Lyapunov-Krasovskii functional, enhancing the precision over conventional methods. These innovations contribute to the formulation of new criteria for the stability and stabilization of the T-S fuzzy delayed system. The practicality and effectiveness of the proposed strategies are demonstrated through their application to a truck-trailer system.
BibTeX
@inproceedings{lu2025exponentially,
  author = {Bin Lü and Yufeng Tian and Yutong Liu and Yue Yang and Xiaojie Su and Linsong Zhang},
  title = {{Exponentially Narrow Delay Interval Technique to Stability and Stabilization for Nonlinear Systems and Its Application to Truck-Trailer System}},
  booktitle = {Nonlinear},
  year = {2025},
  doi = {10.1007/s11071-025-11138-8},
}
Figure