Introduction
In-situ carbon dioxide (CO2) mineralization represents one of the most stable and permanent methods for carbon sequestration. By injecting CO2-saturated water into reactive rock formations, the carbon is chemically converted into solid carbonate minerals. Basaltic formations are particularly attractive targets for this process due to their high concentrations of divalent metal cations—specifically calcium, magnesium, and iron—which readily bond with dissolved CO2.
However, basalt is typically a "tight" rock, meaning its primary storage capacity and transmissivity depend on fracture networks rather than the rock matrix itself. As mineralization progresses, the interplay between chemical reactions and physical stresses significantly alters the rock's internal "plumbing." Understanding the evolution of porosity and permeability is critical: if fractures clog prematurely, injection capacity is lost; if they expand uncontrollably, CO2 migration becomes unpredictable. This study investigates these dynamics under realistic reservoir conditions to uncover the mechanisms governing flow path evolution.
Experimental Methodology
To observe the internal changes of basalt during mineralization without disturbing the reaction environment, researchers developed a sophisticated experimental setup designed to simulate deep subsurface conditions (50°C and high pressure).
Real-Time Monitoring
The core of the methodology involved a waterflooding system that injected CO2-saturated water into fractured basalt samples at a constant flow rate. The team utilized two primary imaging techniques:
- Online Low Field Nuclear Magnetic Resonance (NMR): This allowed for the continuous monitoring of T2 relaxation curves. In this context, T2 curves serve as a proxy for pore size distribution, enabling the researchers to track internal volume changes in real-time.
- Magnetic Resonance Imaging (MRI): 3D reconstructions of the fracture zones were captured every two hours, providing a visual "play-by-play" of the physical structural evolution.
Additionally, outlet pressure was continuously recorded to calculate transient changes in permeability throughout the injection process.
The Pressure-Dissolution-Collapse Mechanism
The study’s most significant finding is that the evolution of porosity and permeability in basalt is not a linear decline toward clogging. Instead, the rock undergoes a periodic evolution characterized by cyclical increases and decreases in flow capacity. The researchers propose a three-stage feedback loop termed the "pressure-dissolution-collapse" mechanism:
- Chemical Dissolution: The acidic, CO2-saturated water reacts with the basaltic minerals along the fracture walls. This process dissolves the rock, initially increasing the fracture aperture and, consequently, increasing both porosity and permeability.
- Structural Weakening: As dissolution continues, it targets the structural "bridges" or asperities that hold the fracture open. The removal of mineral mass weakens the integrity of the fracture walls.
- Mechanical Collapse: Under the constant overburden stress (simulated lithostatic pressure), the weakened rock structure eventually fails. The fracture collapses or pinches shut, leading to a sharp decrease in porosity and permeability.
This cycle repeats as new flow paths are acidified and subsequently fail, suggesting that the subsurface environment is in a constant state of structural flux during the early stages of mineralization.
Key Results and Discussion
The experimental data provided clear evidence for this cyclical behavior:
- Porosity Dynamics: T2 relaxation spectra confirmed that fracture volume fluctuates significantly. Spikes in porosity corresponded with dissolution phases, while sudden plunges aligned with structural failures observed via MRI.
- Permeability Fluctuations: Permeability followed the same periodic trend as porosity. This indicates that the flow capacity of basalt is highly dynamic, challenging the traditional assumption that mineral precipitation is the sole driver of permeability loss.
- Visual Confirmation: Time-lapse MRI reconstructions visualized the physical shifting of internal spaces, showing that flow paths are constantly being destroyed and recreated rather than simply filling with new mineral growth.
Conclusion and Future Outlook
This research provides a new framework for understanding how basaltic reservoirs respond to CO2 injection. The discovery of the pressure-dissolution-collapse mechanism suggests that the "injectivity" of a well may fluctuate naturally as the rock structure adjusts to chemical and mechanical stresses.
While these findings are a breakthrough for core-scale understanding, several questions remain for future exploration. Further study is needed to determine the long-term stability of these cycles and to decouple the specific contributions of mineral precipitation versus physical collapse over longer timescales. Additionally, translating these laboratory-scale periodic patterns into field-scale models will be essential for optimizing carbon storage projects in basaltic provinces worldwide.
Summary updated