Abstract
Recent changes in the overall NASA vision have resulted in further cost and schedule challenges for the Orion program. As a result, additional scrutiny has been focused on the use of new developments for hardware in the environmental control and life support systems (ECLS). This paper examines the Orion architecture as it is envisioned to support missions to the International Space Station (ISS) and future exploration missions, determining what functions can be satisfied through the use of existing, heritage hardware designs. An initial evaluation of each component is included, and where a heritage component was deemed likely, further details are examined. Key technical parameters, mass, volume, and vibration loads are evaluated. Where heritage hardware has been identified that may be substituted in the Orion architecture, a discussion of key requirement changes and recommendations for further evaluation are noted.
Introduction
As NASA transitions toward deep-space exploration while maintaining a presence in Low Earth Orbit (LEO), the Orion spacecraft faces significant engineering and financial hurdles. Traditionally, flagship programs prioritize bespoke, cutting-edge hardware to maximize performance. However, shifting budgetary priorities and aggressive schedules have forced a critical rethink: is it always necessary to "reinvent the wheel"?
This study addresses the challenge of integrating "heritage" hardware—components originally designed and flight-proven for the Space Shuttle, the ISS, or other legacy programs—into the modern Orion Environmental Control and Life Support System (ECLS). The core difficulty lies in the fact that Orion possesses different mass, volume, and environmental requirements than the platforms for which these older components were originally built.
Methodology
The authors employed a systematic engineering audit of the Orion ECLS architecture to identify potential cost-saving substitutions. The approach consisted of four primary phases:
- Component Screening: A top-down review of the ECLS architecture to identify specific functions that could potentially be satisfied by existing designs.
- Technical Parameter Comparison: For each candidate component, heritage specifications were compared against Orion’s baseline requirements, with a focus on mass, volume, and technical performance metrics.
- Vibration Analysis: A critical assessment of whether legacy hardware could survive the specific acoustic and mechanical vibration profiles of the Orion/SLS (Space Launch System) launch environment.
- Requirement Gap Analysis: Where a heritage component was identified as a "near-miss," the team examined which Orion requirements would need to be modified or relaxed to allow for successful integration.
Key Technical Considerations
The "Plug-and-Play" Fallacy
A central finding of the research is that using existing hardware is rarely a simple swap. It requires a complex trade-off analysis where the program must decide if the cost and schedule savings of using a legacy part outweigh the weight or volume penalties it might impose on a modern, mass-sensitive capsule.
The Vibration Hurdle
One of the most significant technical barriers identified is the launch environment. Hardware designed for the relatively "smooth" ride of the Space Shuttle cargo bay may not be rugged enough for the intense mechanical and acoustic vibration loads of the Orion/SLS stack. Re-qualifying these components for a more violent launch profile is a non-trivial engineering task.
Requirement Flexibility
The success of heritage hardware integration depends heavily on the willingness of systems engineers to adjust modern requirements. Rather than forcing legacy hardware to meet arbitrary new standards, the study suggests that requirements should be adjusted to fit the capabilities of proven hardware when the performance delta is acceptable.
Results and Recommendations
The study successfully established a roadmap for ECLS development by identifying specific components where heritage designs are viable candidates for substitution. While the paper provides a structured framework for these trade-offs, it emphasizes that technical parameters must be balanced against the risk reduction of avoiding a "clean sheet" design.
However, the authors acknowledge that an initial evaluation is only the first step. Future work must include:
- Rigorous Testing: Subjecting heritage candidates to Orion-specific vibration and thermal vacuum testing to confirm survivability.
- Integration Deep-Dives: Analyzing how legacy components interface with Orion’s modern digital avionics and power distribution systems.
- Formal Specification Changes: Transitioning from theoretical applicability to formal changes in the Orion system specifications to accommodate selected hardware.
Conclusion
By leveraging the pragmatic reliability of flight-proven components, the Orion program can potentially mitigate the rising costs and schedule delays associated with new hardware development. The path forward requires a disciplined balance between innovation and the strategic use of heritage technology, supported by a willingness to adapt modern requirements to existing, reliable solutions.
Summary updated