Erase-Hidden and Drivability-Improved Magnetic Non-Volatile Flip-Flops With NAND-SPIN Devices

Ziyi Wang, Zhaohao Wang, Yansong Xu, Bi Wu, Weisheng Zhao

Abstract

Non-volatile flip-flops (NVFFs) using power gating techniques promise to overcome the soaring leakage power consumption issue with the scaling of CMOS technology. Magnetic tunnel junction (MTJ) is a good candidate for constructing the NVFF thanks to its low power, high speed, good CMOS compatibility, etc. In this article, we propose a novel magnetic NVFF based on an emerging memory device called NAND-SPIN. The data writing of NAND-SPIN is achieved by successively applying two unidirectional currents, which respectively generate the spin orbit torque (SOT) and spin transfer torque (STT) for erase and programming operations. This characteristic allows us to design an erase-hidden and drivability-improved magnetic NVFF. Furthermore, more design flexibility could be obtained since the backup operation of the proposed NVFF is not limited by the inherent slave latch. Simulation results show that our proposed NVFF achieves performance improvement in terms of power, delay and area, compared with conventional slave-latch-driven SOT-NVFF designs.

Introduction

As CMOS technology scales, leakage power has become a dominant factor in total power consumption, often exceeding 40%. Power Gating (PG) is a widely adopted technique to mitigate this by disconnecting inactive blocks. However, standard flip-flops are volatile, necessitating data transfer to non-volatile memory before power-off, which incurs significant latency and energy overhead. Magnetic Non-Volatile Flip-Flops (NVFFs) using Magnetic Tunnel Junctions (MTJs) offer a solution by enabling local data storage. Despite their promise, existing SOT-NVFF designs suffer from write asymmetry and source degeneration due to the bidirectional current requirements of standard switching mechanisms.

The NAND-SPIN Architecture and Erase-Hidden Strategy

The proposed NVFF utilizes the NAND-SPIN device, which features two MTJs on a shared heavy-metal strip. This structure supports a hybrid switching mechanism: Spin-Orbit Torque (SOT) for erasing and Spin-Transfer Torque (STT) for programming.

NAND-SPIN device structure showing current paths for erase (SOT) and program (STT) operations.

A key innovation is the "erase-hidden" strategy. In traditional NVFFs, the erase operation occurs during the critical backup phase just before power-off. In this design, the SOT-induced erase is performed as soon as the flip-flop enters active mode. This effectively removes erase latency from the backup path, significantly reducing the time required to enter sleep mode. Furthermore, by separating erase and program operations, the design employs unidirectional currents. This avoids the source degeneration effect seen in bidirectional designs, where transistors operate with reduced gate-source bias. Consequently, smaller driving transistors can be used without sacrificing performance, improving area efficiency.

Performance and Simulation Results

The design was validated using 40 nm CMOS design kits and electrical models of SOT-MTJs based on the Landau-Lifshitz-Gilbert (LLG) equation. The simulation waveforms confirm the successful execution of erase-hidden, backup, and restore cycles.

Simulation waveforms demonstrating the timing of control signals and MTJ states during active, backup, and restore operations.

Key performance results include:

  • Backup Efficiency: For perpendicular MTJs, the proposed NVFF achieved a 4.2x speedup in backup delay and a 65% reduction in energy compared to state-of-the-art SOT-NVFFs. In-plane versions showed a 2.6x speedup and 23% lower energy.
  • Scalability: The design demonstrated superior robustness to scaling. While previous designs failed to function when volatile components were shrunk due to inadequate driving current, the NAND-SPIN NVFF continued to perform efficiently.

Conclusion

By leveraging the unique properties of NAND-SPIN devices and an erase-hidden operation, the proposed architecture offers a robust solution for energy-efficient, power-gated computing systems. It effectively overcomes traditional latency and drivability bottlenecks, providing a significant step forward in magnetic non-volatile memory design.

Summary updated

Abstract

Non-volatile flip-flops (NVFFs) using power gating techniques promise to overcome the soaring leakage power consumption issue with the scaling of CMOS technology. Magnetic tunnel junction (MTJ) is a good candidate for constructing the NVFF thanks to its low power, high speed, good CMOS compatibility, etc. In this article, we propose a novel magnetic NVFF based on an emerging memory device called NAND-SPIN. The data writing of NAND-SPIN is achieved by successively applying two unidirectional currents, which respectively generate the spin orbit torque (SOT) and spin transfer torque (STT) for erase and programming operations. This characteristic allows us to design an erase-hidden and drivability-improved magnetic NVFF. Furthermore, more design flexibility could be obtained since the backup operation of the proposed NVFF is not limited by the inherent slave latch. Simulation results show that our proposed NVFF achieves performance improvement in terms of power, delay and area, compared with conventional slave-latch-driven SOT-NVFF designs.
BibTeX
@article{wang2020erase,
  author = {Ziyi Wang and Zhaohao Wang and Yansong Xu and Bi Wu and Weisheng Zhao},
  title = {{Erase-Hidden and Drivability-Improved Magnetic Non-Volatile Flip-Flops With NAND-SPIN Devices}},
  journal = {IEEE Transactions on Nanotechnology},
  year = {2020},
  doi = {10.1109/tnano.2020.2999751},
}
Figure