Epoxidation Kinetics of High-Linolenic Triglyceride Catalyzed by Solid Acidic-Ion Exchange Resin

Adhimoolam Bakthavachalam Kousaalya, Shiferaw D. Beyene, Beshah Ayalew, Srikanth PillaScientific 2019 · DOI

Introduction

The industrial shift toward sustainable materials has positioned epoxidized vegetable oils (EVOs) as promising alternatives to toxic, petroleum-based epoxies. However, standard EVOs often lack the crosslinking density required for high-performance applications. Perilla oil, characterized by its high linolenic acid content, offers a solution, but its complex chemical structure makes controlled epoxidation challenging. This study addresses the limitations of existing kinetic models by developing a robust "pseudo two-phase" model that accounts for the varying reactivity of double bonds based on their position within the triglyceride molecule.

Modeling the Prilezhaev Reaction

The epoxidation process follows the Prilezhaev reaction, a multi-phase system involving oil, aqueous phases, and a solid catalyst. In this study, a solid acidic-ion exchange resin (AIER) was used to catalyze the formation of performic acid. The researchers employed the Langmuir-Hinshelwood-Hougen-Watson (L-H-H-W) postulates, assuming that the adsorption of formic acid onto the catalyst is the rate-determining step.

Reaction schemes (a) and structural scenarios (b) for perilla oil epoxidation.

To capture the nuances of the reaction, four scenarios (S1–S4) were tested, as illustrated in the figure above. These scenarios range from treating all double bonds as identical (S4) to distinguishing between positions 9, 12, and 15 (S1). A genetic algorithm (GA) was utilized to fit the model to experimental iodine and epoxy values obtained at 40°C, 50°C, and 60°C over 8-hour periods.

Results and Discussion

The modeling results revealed that Scenario S2—which groups the 9th and 12th positions together while treating the 15th position as distinct—provided the best fit for the experimental data. This confirms that the position of a double bond significantly dictates its reactivity and susceptibility to side reactions like oxirane cleavage.

Key findings include:

  • Position-Dependent Reactivity: Double bonds at the 15th position, furthest from the bulky glycerol backbone, are highly reactive and consumed rapidly, often within the first 50 minutes at higher temperatures.
  • The Shielding Effect: Epoxy groups at the 9th and 12th positions demonstrated unexpected stability against cleavage. The researchers propose a "steric shield" effect, where the glycerol backbone and hydroxyl groups formed at the 15th position protect the inner epoxy groups from acidic attack.
  • Model Robustness: While the industry-standard assumption (Scenario S4) resulted in errors exceeding 50% for high-linolenic oil, the proposed S2 model maintained an error rate of less than 10% at 50°C.

Conclusion

This research provides a sophisticated framework for understanding the epoxidation kinetics of highly unsaturated oils. By moving beyond simplified homogeneous models and accounting for the heterogeneous nature of solid-acid catalysis and molecular geometry, the authors have developed a tool that can optimize the synthesis of bio-based epoxies for advanced industrial use. Future work will focus on direct physical characterization of catalyst surface dynamics to further refine these kinetic parameters.

Summary updated

Abstract

Epoxidation of high-linolenic perilla oil was carried out in the presence of solid acidic ion-exchange resin at varying reaction temperatures for 8 h. A pseudo two-phase kinetic model that captures the differences in reactivity of double bonds at various positions in the fatty acid of a triglyceride molecule during both epoxy formation and cleavage was developed. The proposed model is based on the Langmuir-Hinshelwood-Hougen-Watson (L-H-H-W) postulates and considers the adsorption of formic acid on the catalyst as the rate-determining step. To estimate the kinetic rate constants of various reactions, genetic algorithm was used to fit experimentally obtained iodine and epoxy values of epoxidized perilla oil. A re-parametrized form of Arrhenius equation was used in the proposed model to facilitate the precise estimation of parameters with least computational effort. The obtainment of the least error between experimentally determined and theoretically predicted iodine and epoxy values indicates the robustness of the proposed model.
BibTeX
@inproceedings{kousaalya2019epoxidation,
  author = {Adhimoolam Bakthavachalam Kousaalya and Shiferaw D. Beyene and Beshah Ayalew and Srikanth Pilla},
  title = {{Epoxidation Kinetics of High-Linolenic Triglyceride Catalyzed by Solid Acidic-Ion Exchange Resin}},
  booktitle = {Scientific},
  year = {2019},
  doi = {10.1038/s41598-019-45458-8},
}
Figure