Abstract
LaNiO3-Perovskite-type oxides, as a novel hydrolytic catalyst, were synthesized using a sol-gel-calcination method, and were characterized by employing x-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Brunauer–Emmett–Teller (BET). It was revealed that LaNiO3 and 2% g-C3N4/LaNiO3-Perovskite-type oxides are nanoparticles about 12 nm and 10nm easily agglomerated in large amounts, and the specific surface area of LaNiO3 is 21.277 m2/g and 2% g-C3N4/LaNiO3 is 26.645 m2/g, respectively. The results also indicate that there are irregular microporoes in the material. In the catalytic activity test, the absorption spectra were collected when hydrolysis of p-nitrophenyl picolinate (PNPP) (CPNPP =1-5×10-5 mol/L) was catalyzed by LaNiO3 (0.5g/L) and 2% g-C3N4/LaNiO3 (0.5g/L) in buffer solution at different pH values (6.5-7.8), respectively. Based on the absorption spectrum data, the pseudo first-order rate constant is estimated to be 0.59 min-1 and 1.14 min-1, respectively. In addition, the proposed kinetics model of this reaction was confirmed by the results of the spectrum and the calculations.
Introduction
Natural enzymes are the gold standard for chemical catalysis, but their industrial application is often hindered by high costs, poor stability, and difficulties in reusability. To address these challenges, researchers are developing "inorganic enzymes"—synthetic materials that mimic the active sites of natural proteins while offering the durability of minerals. This study focuses on mimicking carboxylesterase using perovskite-type oxides ($ABO_3$), a class of materials well-known in solar and photocatalysis but relatively unexplored as hydrolytic catalysts.
Materials and Methods
$LaNiO_3$ nanoparticles were synthesized via a citric acid sol-gel-calcination method. To improve catalytic efficiency, a composite was developed by doping the perovskite with 2% graphitic carbon nitride ($g-C_3N_4$), a material selected for its high surface area and chemical stability.
The resulting materials were characterized using:
- X-ray Diffraction (XRD): To confirm the hexagonal crystal structure of $LaNiO_3$.
- Scanning Electron Microscopy (SEM): To observe the morphology of the 10–12 nm nanoparticles.
- Brunauer–Emmett–Teller (BET): To measure surface area and identify the presence of irregular micropores.
- UV-Vis Spectrophotometry: To monitor the hydrolysis of p-nitrophenyl picolinate (PNPP) in real-time by tracking the production of p-nitrophenol at 400 nm. Catalytic tests were performed at concentrations of 0.5 g/L for the catalyst and $1–5 \times 10^{-5} \text{ mol/L}$ for PNPP.
Results and Discussion
Enhanced Surface Area and Morphology
Characterization revealed that the addition of 2% $g-C_3N_4$ successfully dispersed the $LaNiO_3$ nanoparticles, which otherwise tend to agglomerate. This synergistic effect increased the specific surface area from $21.28 \text{ m}^2/g$ (pure $LaNiO_3$) to $26.65 \text{ m}^2/g$ (composite), providing more available active sites for the reaction.
Kinetic Performance and pH Effects
The catalytic activity was tested across a pH range of 6.5 to 7.8. The composite catalyst significantly accelerated the reaction, with the pseudo-first-order rate constant ($k_H$) nearly doubling from $0.59 \text{ min}^{-1}$ for pure perovskite to $1.14 \text{ min}^{-1}$ for the $g-C_3N_4/LaNiO_3$ composite. Higher pH levels were found to facilitate the dissociation of water on the catalyst surface, generating hydroxyl species that more effectively attack the ester bond.
Catalytic Mechanism
In the $ABO_3$ structure, the Nickel (B-site) acts as the active catalytic center. It coordinates with the nitrogen atom on the pyridine ring of the PNPP molecule, mimicking the function of metal ions in natural metalloenzymes. A "blue shift" observed in the absorption spectrum of PNPP upon catalyst addition provides physical evidence of an intermediate complex forming between the substrate and the catalyst surface.
Stability and Reusability
The "inorganic enzyme" demonstrated superior durability compared to natural biocatalysts. It remained highly stable for the first three cycles of use. While a slight dip in activity occurred after the fourth cycle, likely due to surface fouling, the catalyst remained functional through seven continuous cycles of testing.
Conclusion
This study demonstrates that $g-C_3N_4/LaNiO_3$ composites are effective, stable mimics for hydrolytic enzymes. By optimizing the surface area and leveraging the catalytic properties of the B-site metal, these perovskite-type oxides offer a robust alternative for ester hydrolysis. Future research will explore different doping ratios and metal substitutions to further refine the activity of these inorganic catalysts.
Summary updated