Enhancing single photon emission through quasi-bound states in the continuum of monolithic hexagonal boron nitride metasurface

Shun Cao, Yi Jin, Hongguang Dong, Tingbiao Guo, Jinlong He, Sailing He

Abstract

A patterned structure of monolithic hexagonal boron nitride (hBN) on a glass substrate, which can enhance the emission of the embedded single photon emitters (SPEs), is useful for on-chip single-photon sources of high quality. Here, we design and demonstrate a monolithic hBN metasurface with quasi-bound states in the continuum (quasi-BIC) mode at emission wavelengths with ultrahigh Q values to enhance fluorescence emission of SPEs in hBN. Because of ultrahigh electric field enhancement inside the proposed hBN metasurface, an ultrahigh Purcell factor ($3.3 \times 10^4$) is achieved. In addition, the Purcell factor can also be strongly enhanced in most parts of the hBN structure, which makes the hBN metasurface suitable for monolithic quantum photonics.

Introduction

Single-photon emitters (SPEs) are essential components for quantum communication and on-chip quantum information processing. Hexagonal boron nitride (hBN) has emerged as a premier host for these emitters due to their brightness and stability at room temperature. However, creating efficient quantum light sources requires significantly enhancing the spontaneous emission rate of these SPEs via the Purcell effect.

Existing methods, such as plasmonic nanoparticles or photonic crystal cavities (PCCs), often suffer from extreme spatial sensitivity. In these systems, the electric field "hotspot" is so small that a nanometer-scale misalignment of the SPE can cause the enhancement to vanish. Furthermore, hybrid systems combining hBN with other materials introduce fabrication complexities and optical losses. This work addresses these challenges through a monolithic hBN metasurface design.

Design and Methodology

The proposed structure consists of an hBN film on a glass substrate, topped with an hBN grating. The core innovation lies in the broken in-plane inversion symmetry of the grating. The unit cell is composed of two bars with slightly different widths ($w_h + \Delta w$ and $w_h - \Delta w$). This asymmetry, defined by the parameter $\delta = \Delta w/w_h$, allows the system to transition from a "true" BIC—a state perfectly confined and uncoupled from external light—to a quasi-BIC.

Schematic of the monolithic hBN metasurface design showing (a) 3D view, (b) top view with asymmetry parameters, and (c) cross-section with embedded SPEs.

Numerical simulations were performed using the finite element method (COMSOL Multiphysics). Crucially, hBN was modeled as a uni-anisotropic material to account for its distinct refractive indices along different crystal axes ($n_x=n_y=1.84, n_z=1.72$).

Physics of Quasi-BICs

The radiative Q factor of the metasurface follows an inverse quadratic relationship with the asymmetry parameter ($Q \propto 1/\delta^2$). As the structure approaches perfect symmetry ($\delta \to 0$), the Q factor increases dramatically, theoretically reaching infinity at the BIC point. By tuning $\delta$, researchers can achieve ultra-high Q factors while maintaining coupling to external radiation.

Reflectance map as a function of wavelength and asymmetry (a), and the inverse quadratic scaling of the Q factor with the asymmetry parameter (b).

Unlike traditional cavities where enhancement is localized to a singular point, the quasi-BIC mode in this metasurface enhances the electric field across a large portion of the hBN structure. This spatial robustness significantly relaxes the requirements for precise SPE positioning, a major hurdle in experimental quantum optics.

Key Results

  • Ultrahigh Purcell Factor: Simulations demonstrated a maximum Purcell factor of $3.3 \times 10^4$ at an asymmetry parameter of $\delta = 0.01$.
  • Massive Q Factors: The Q factor exceeded 208,000 at $\delta = 0.01$, outperforming typical hBN-based photonic crystal cavities.
  • Field Enhancement: The internal electric field was enhanced by up to 350 times relative to the incident wave.
  • Fabrication Tolerance: The design is robust against common manufacturing variances, with the Q factor remaining stable despite small errors in etching depth or grating width.

Conclusion and Future Outlook

This monolithic hBN metasurface provides a powerful platform for enhancing single-photon emission without the need for complex hybrid integration. While current designs focus on y-axis oriented dipoles, future iterations may explore polarization-independent quasi-BIC modes to accommodate random dipole orientations. Beyond quantum light sources, this high-Q platform holds potential for high-harmonic generation, biosensing, and enhanced fluorescence in various nanophotonic applications.

Summary updated

Abstract

A patterned structure of monolithic hexagonal boron nitride (hBN) on a glass substrate, which can enhance the emission of the embedded single photon emitters (SPEs), is useful for onchip single-photon sources of high-quality. Here, we design and demonstrate a monolithic hBN metasurface with quasi-bound states in the continuum mode at emission wavelength with ultrahigh Q values to enhance fluorescence emission of SPEs in hBN. Because of ultrahigh electric field enhancement inside the proposed hBN metasurface, an ultrahigh Purcell factor (3.3*10^4) is achieved. In addition, the Purcell factor can also be strongly enhanced in most part of the hBN structure, which makes the hBN metasurface suitable for e.g. monolithic quantum photonics.
BibTeX
@article{cao2021enhancing,
  author = {Shun Cao and Yi Jin and Hongguang Dong and Tingbiao Guo and Jinlong He and Sailing He},
  title = {{Enhancing single photon emission through quasi-bound states in the continuum of monolithic hexagonal boron nitride metasurface}},
  journal = {Journal of Physics Materials},
  year = {2021},
  doi = {10.1088/2515-7639/abf3ce},
}
Figure