Abstract
Combining intelligent reflecting surface (IRS) and non-orthogonal multiple access (NOMA) is an effective solution to enhance communication coverage and energy efficiency. In this paper, we focus on an IRS-assisted NOMA network and propose an energy-efficient algorithm to yield a good tradeoff between the sum-rate maximization and total power consumption minimization. We aim to maximize the system energy efficiency by jointly optimizing the transmit beamforming at the BS and the reflecting beamforming at the IRS. Specifically, the transmit beamforming and the phases of the low-cost passive elements on the IRS are alternatively optimized until the convergence. Simulation results demonstrate that the proposed algorithm in IRS-NOMA can yield superior performance compared with the conventional OMA-IRS and NOMA with a random phase IRS.
Introduction
As wireless networks evolve toward "Beyond 5G" (B5G), two technologies have emerged as pivotal: Intelligent Reflecting Surfaces (IRS) and Non-Orthogonal Multiple Access (NOMA). IRS utilizes low-cost passive elements to reconfigure the wireless environment, effectively steering radio waves to improve coverage in "dead zones" where direct line-of-sight is blocked. Simultaneously, NOMA enhances spectral efficiency by allowing multiple users to share the same time and frequency resources through power-domain multiplexing.
While previous research has often prioritized either maximizing data rates or minimizing power consumption, this study addresses the critical challenge of Energy Efficiency (EE)—defined as the ratio of the total data rate to the total power consumed. The resulting optimization problem is non-convex and highly complex due to the tight coupling between base station (BS) transmit beamforming and IRS phase shifts.
Proposed Methodology
The authors propose an Alternating Optimization (AO) framework to decouple the joint optimization problem into two manageable sub-problems, solved iteratively until convergence:
- Transmit Beamforming Optimization: To address the non-convex power-to-rate ratio, the framework introduces slack variables and employs Sequential Convex Approximation (SCA). This transforms the problem into a series of convex sub-problems that can be solved efficiently.
- Phase Shift Optimization: The goal is to maximize the sum-rate by tuning IRS elements under a "unit-modulus" constraint (where elements only change phase, not amplitude). This is achieved using Semi-Definite Relaxation (SDR) and lower-bound approximations.
This iterative approach ensures that the system reaches a stable, energy-efficient state by refining both the BS and IRS parameters in tandem.
Simulation and Performance Analysis
The study utilizes numerical simulations to validate the proposed algorithm. The environment consists of a BS located 40m from an IRS, with two users positioned in a "dead zone" (10m and 20m from the IRS) where direct signals from the BS are obstructed by buildings. The channels are modeled using Rician fading to account for both line-of-sight and scattered components.
Key Insights
- Synergy of IRS and NOMA: NOMA's effectiveness relies on Successive Interference Cancellation (SIC), which performs best when there is a significant difference in channel strength between users. The IRS is uniquely capable of reconfiguring the environment to create these favorable channel conditions.
- Scalability and IRS Size: A primary finding is that energy efficiency increases almost linearly with the number of reflecting elements ($N$) on the IRS. This confirms that adding low-cost passive elements is a highly effective strategy for creating "greener" networks.
- Optimization vs. Randomness: The results clearly show that the proposed optimization algorithm significantly outperforms configurations using random IRS phase shifts. Furthermore, while increasing the number of transmit antennas ($M$) at the BS improves efficiency, it yields smaller marginal gains compared to increasing the number of IRS elements ($N$) due to fixed power budget constraints.
Conclusion
The proposed IRS-NOMA scheme demonstrates a significant performance leap over conventional IRS-assisted Orthogonal Multiple Access (OMA) and non-optimized NOMA systems. By intelligently steering signals into dead zones and optimizing the power-rate tradeoff, this framework provides a robust foundation for energy-efficient B5G infrastructure.
Future work will focus on scaling this model to multi-user clusters and addressing the practical challenges of channel state information (CSI) estimation for passive surfaces, which remains a significant hurdle for real-world deployment.
Summary updated