Electrically pumped surface-emitting amplified spontaneous emission from colloidal quantum dots

Fengshou Tian, Zhou Tian-hong, Xuanyu Zhang, Rui Chen, Shuming ChenLight 2025 · DOI

TL;DR

Researchers have achieved electrically pumped, surface-emitting amplified spontaneous emission (ASE) from colloidal quantum dots (QDs) for the first time. This breakthrough was made possible by a clever co-design of the quantum-dot light-emitting diode (QLED) that optimizes both heat management and optical properties, paving the way for QD-based laser diodes.

What Problem Does This Paper Address?

Colloidal quantum dots (QDs) are highly attractive for creating low-cost, tunable, and solution-processable laser diodes. However, a critical step towards this goal, electrically pumped amplified spontaneous emission (ASE) – a precursor to lasing – has remained elusive. The main hurdles are achieving sufficient optical gain within the QD layer and efficiently injecting enough current to create the necessary population inversion without causing excessive heat. Existing approaches struggle with low net optical gain due to losses from metallic electrodes and poor light confinement, as well as the thermal damage caused by high current densities required for population inversion.

Methods

The authors tackled these challenges through an "electro-thermal-optical co-design" of a quantum-dot light-emitting diode (QLED).

  • Electro-thermal management: To handle the high currents needed for population inversion (up to 2000 A cm⁻²), they employed a combination of strategies:
  • Reduced emission area: Devices were fabricated with a small emitting area (0.01 mm²).
  • Si heat sink: The QLEDs were built directly on a silicon substrate, which is an excellent thermal conductor.
  • Pulsed current: Devices were driven with short, nanosecond (ns) pulsed current sources to minimize heat accumulation.
  • Optical design: A top-emitting (TE) Fabry-Pérot (FP) cavity was engineered to resonate QD emission and enhance optical gain. Key features include:
  • Ag/Indium-Zinc-Oxide (IZO) electrodes: A reflective Ag bottom electrode and a semi-transparent IZO/Ag top electrode were used.
  • Dual IZO phase tuning layers: These layers, strategically placed adjacent to the metallic electrodes, were crucial for eliminating surface plasmon polariton (SPP) losses, which typically occur at metal-semiconductor interfaces. This also helped confine the optical field within the QD gain medium.
  • Thicker QD layer: A 70 nm QD layer was used to ensure a sufficient light amplification path.

Datasets

Not discussed in the paper. The study focuses on experimental device fabrication and characterization.

Key Insights and Ideas

  • The critical role of SPP loss mitigation: The introduction of dual IZO layers was a game-changer, effectively eliminating surface plasmon polariton losses that plague many metal-electrode-based optoelectronic devices. This allowed for better optical field confinement and reduced energy dissipation.
  • Synergy of electro-thermal and optical design: The success hinges on the integrated approach. High current injection is only possible with effective thermal management, and this high injection then needs an optimized optical cavity to translate into gain.
  • Surface-emitting ASE is achievable: Demonstrating surface-emitting ASE, which is more desirable for integration than edge-emitting, overcomes a significant hurdle for future VCSEL development.
  • Lateral ASE scattering contributes to surface emission: The authors suggest that the observed surface-emitting ASE arises from the scattering of lateral ASE, a phenomenon also seen in perovskite devices. This highlights the importance of understanding light propagation and scattering within the QD gain medium.

Key Results

  • Electrically pumped surface-emitting ASE achieved: The developed TE-DIZO QLED demonstrated surface-emitting ASE.
  • High current injection capability: Devices operated stably at high currents up to 2000 A cm⁻² due to effective thermal management.
  • Reduced optical losses and enhanced gain: The dual IZO layers eliminated SPP losses and led to a 2-fold enhancement in optical modal gain.
  • ASE thresholds:
    • Optically pumped ASE threshold: 10 µJ cm⁻² (at 77 K).
  • Electrically pumped ASE threshold: 94 A cm⁻² (at 153 K).
  • Strong directionality and narrow bandwidth: The electrically pumped ASE exhibited high intensity, strong directionality, and a narrow linewidth.
  • Suppressed efficiency roll-off: The TE-DIZO device showed a notably weaker efficiency roll-off at high currents compared to a bottom-emitting (BE) device, attributed to enhanced radiative recombination.

Limitations and Future Work

  • Electron leakage: The authors note that electron leakage at high currents reduces emission efficiency and limits further ASE gain. Future work could focus on better electron confinement.
  • Scattering mechanism: While they propose scattering of lateral ASE as the source of surface emission, the exact mechanism and its contribution are still under investigation.
  • Lasing: The current work demonstrates ASE, a crucial step, but achieving true lasing will require further optimization to overcome remaining losses and achieve optical gain exceeding cavity losses.
  • VCSEL development: The authors explicitly state that this work paves the way for QD-based vertical cavity surface-emitting laser (VCSEL) diodes, indicating this as a clear future direction.

Summary updated

Abstract

Colloidal quantum dots (QDs) are promising gain materials for realizing solution-processable, wavelength-tunable and low-cost laser diodes. However, achieving electrically pumped amplified spontaneous emission (ASE) in QDs, a prerequisite for lasing, is hampered by the low net optical gain and low current injection of the diodes. Here we demonstrate electrically pumped and surface-emitting ASE from QDs by electro-thermal-optically co-designing a quantum-dot light-emitting diode (QLED) with high net optical gain and high current injection. By developing a top-emitting cavity featuring a Ag/indium-zinc-oxide (IZO) bottom reflective electrode and a IZO/Ag top semi-transparent electrode, the QD emission is effectively resonated; moreover, not only are the surface plasmon polariton losses induced by the metallic electrodes completely eliminated, but also the optical field can be confined primarily within the QDs, resulting in a reduction in loss and a 2-fold enhancement in gain. As a result, the QLED exhibits surface-emitting ASE with a threshold of 10 μJ cm<sup>-2</sup> when pumped by a 100 fs laser at 77 K. By building the QLED directly on a Si heat sink and driving the QLED with an ns-pulsed current source, the Joule heat is effectively dissipated, allowing the QLED to operate stably even at a high current of 2000 A cm<sup>-2</sup>. At 153 K and an injection current of 94 A cm<sup>-2</sup>, the QLED demonstrates surface-emitting ASE with strong directionality, high intensity and narrow bandwidth. The developed QLED, capable of generating surface-emitting ASE, paves the way for the development of QD based vertical cavity surface-emitting laser diodes.
BibTeX
@inproceedings{tian2025electrically,
  author = {Fengshou Tian and Zhou Tian-hong and Xuanyu Zhang and Rui Chen and Shuming Chen},
  title = {{Electrically pumped surface-emitting amplified spontaneous emission from colloidal quantum dots}},
  booktitle = {Light},
  year = {2025},
  doi = {10.1038/s41377-025-01972-1},
}

Loading related content...

Figure