Eddy Current Imaging of Fiber Textures in CFRP Composite Based on Spatial Frequency Domain De-aliasing Method

Jun Cheng, Y. Yong, Buyun Wang, Dezhang Xu, Yu Cheng, Jiquan YangJournal of Mechanical Engineering 2022 · DOI

Abstract

Spatial resolution is a critical metric for evaluating image quality in eddy current imaging. In Carbon Fiber Reinforced Polymer (CFRP) inspection, undersampling often leads to spectral aliasing, causing fiber textures to appear coarse and blurred. This study investigates an eddy current image enhancement method based on spatial frequency domain de-aliasing to significantly improve spatial resolution and detection accuracy for fiber arrangements and defects. A mesoscopic electromagnetic model of CFRP laminates is established to reveal the imaging mechanism of fiber textures and the aliasing patterns of periodic structures. The Point Spread Function (PSF) of the eddy current probe is estimated, and the spatial resolution of different Transmitter-Receiver (T-R) probes is evaluated. Finally, an inverse convolution texture refinement focusing method based on PSF and Fourier transform is proposed to achieve high-precision imaging of fiber orientations and layup defects in CFRP laminates.

Introduction

Carbon Fiber Reinforced Polymer (CFRP) is widely used in aerospace and automotive industries for its high strength-to-weight ratio. However, non-destructive testing (NDT) of its internal structure remains challenging. Eddy Current Testing (ECT) is a popular method, but it faces a significant resolution gap: individual carbon fibers are approximately 7 μm in diameter, while sensing probes are typically several millimeters wide.

Because the probe is much larger than the fibers it scans, the resulting image suffers from spatial undersampling. In signal processing terms, this causes aliasing—high-frequency details of the fiber textures are folded into lower frequencies, resulting in a blurry, "coarse" image. This makes it difficult to identify critical meso-scale defects like fiber waviness, wrinkles, or small gaps.

Methodology

The authors address this blurring through a combination of simulation, hardware characterization, and digital signal processing.

Mesoscopic Simulation and T-R Probes

A detailed electromagnetic model was developed in COMSOL Multiphysics to simulate eddy current flow through individual fiber bundles. The study specifically utilized Transmitter-Receiver (T-R) probes, which were found to be more sensitive to fine fiber textures than traditional coaxial probes.

Structure of the Transmitter-Receiver (T-R) eddy current probe used in the study.

PSF Estimation

The system's response was characterized using the Point Spread Function (PSF). The PSF describes how a single point source is blurred by the imaging system. In this study, the PSF was estimated by scanning a test plate with a 1 mm diameter through-hole, representing a point-like defect. The response was modeled as a Gaussian function related to the probe's physical dimensions.

Experimental setup for PSF estimation using a 1 mm through-hole in a test plate.

Inverse Convolution (De-aliasing)

The core innovation is a Fast Fourier Transform (FFT) deconvolution algorithm. By treating the physical size of the probe as a low-pass spatial filter, the "blur" becomes a predictable mathematical transformation. By taking the blurry raw image and "dividing out" the probe's PSF in the frequency domain, the fiber textures can be mathematically thinned and the image refocused.

Key Results

  • Resolution Improvement: In experimental tests on a cross-ply laminate, the raw scan showed an average fiber texture width of 7.1 mm. After applying the de-aliasing algorithm, this was sharpened to 5.6 mm, a significant increase in spatial resolution.
  • Visualizing Complex Layups: In complex three-direction layups ($[0^\circ/45^\circ/-45^\circ]_8$), where raw eddy current images were featureless, de-aliasing revealed the distinct orientations of the fiber layers.
  • Defect Detection: The method successfully highlighted hidden delamination defects and "focused" their edges, allowing for more accurate sizing and shape identification of internal damage.

Conclusion

This research demonstrates that digital de-aliasing can achieve the resolution of a much smaller probe while maintaining the robust signal-to-noise ratio of a larger one. While the de-aliasing process can sometimes cause signals from fiber textures and defects to overlap, it represents a significant step toward high-precision automated inspection of composite materials. Future work will focus on signal decoupling to further separate structural textures from defect signals.

Summary updated

Abstract

摘要: 空间分辨率是图像质量评价的一项关键性指标,在涡流成像技术的应用中非常重要。针对碳纤维增强树脂基复合材料(Carbon fiber reinforced polymer,CFRP)电涡流成像中欠采样频谱混叠引起的纤维纹路粗大和模糊难以辨别等问题,研究基于空频域去混叠的涡流图像增强方法,显著提高图像的空间分辨率和对纤维排布以及缺陷的检测精度。建立CFRP层合板的细观电磁仿真模型,揭示涡流纹路成像机理和周期性结构信号的混叠规律;接下来对涡流探头的点扩散函数进行研究和估计,结合信号波形特征提取,评价不同结构尺寸发射-接收(Transmitter-Receiver,T-R)型探头图像的空间分辨率;提出基于点扩散函数和傅里叶变换的逆卷积纹路细化聚焦方法,以实现对CFRP层合板中纤维方向和铺层缺陷的高精度成像,并达到图像反映复合材料缺陷真实形状的目的。
BibTeX
@article{cheng2022eddy,
  author = {Jun Cheng and Y. Yong and Buyun Wang and Dezhang Xu and Yu Cheng and Jiquan Yang},
  title = {{Eddy Current Imaging of Fiber Textures in CFRP Composite Based on Spatial Frequency Domain De-aliasing Method}},
  journal = {Journal of Mechanical Engineering},
  year = {2022},
  doi = {10.3901/jme.2022.04.014},
}
Figure