Abstract
The cable-driven segmented manipulator with cable-constrained synchronous rotating mechanisms (CCSRM) is a novel continuum manipulator offering high stiffness with minimal motor requirements. This paper details a dynamic modeling method that accounts for cable friction and deformation. Key innovations include an Arbitrary Lagrangian-Eulerian (ALE) formulation for driving cables, a model smoothing technique to handle numerical stiffness, and quaternion-based rigid link modeling. Experimental verification on an air-floating platform demonstrates that friction and cable deformation significantly impact behavior, notably causing deviations from the traditional constant curvature assumption.
Introduction
Continuum manipulators, inspired by biological structures like elephant trunks, are essential for navigating complex, confined environments. However, traditional designs often struggle with a trade-off between flexibility and control complexity. The Cable-Constrained Synchronous Rotating Mechanism (CCSRM) addresses this by using rigid links and universal joints synchronized by connecting cables, achieving high stiffness without an excessive number of motors.
The CCSRM Architecture
The mechanical complexity of the CCSRM, while beneficial for performance, introduces significant modeling challenges. The system involves numerous contact points, complex stick-slip friction transitions, and high physical stiffness that can lead to unstable numerical simulations. The architecture relies on internal pulleys and connecting cables to ensure that segments move in a coordinated fashion.
Dynamic Modeling Framework
To accurately simulate the CCSRM, a multi-layered modeling approach was developed to tackle high degrees of freedom and numerical instability:
- ALE Formulation for Cables: The Arbitrary Lagrangian-Eulerian (ALE) formulation was employed for driving cables. Unlike standard finite element methods, ALE allows the mesh to move independently of the material, which is ideal for modeling sliding cables with fewer degrees of freedom.
- Model Smoothing: A time-averaging strain method was introduced to mitigate "numerical stiffness." By filtering high-frequency elastic vibrations, the researchers could use efficient explicit solvers (e.g., RK45) instead of computationally expensive implicit ones.
- Rigid Link and Friction Modeling: Rigid segments were modeled using quaternions to avoid mathematical singularities. Friction was addressed through a modified Coulomb model and a specific trial-and-error algorithm to detect stick-slip transitions at contact holes.
Experimental Validation and Insights
The model was validated using a custom two-segment, 12-link experimental rig on an air-floating platform to simulate zero-gravity conditions. Motion-capture cameras tracked the manipulator's joint angles, which were then compared to simulation results.
The Death of Constant Curvature
A primary finding is that the "constant curvature" assumption—where a robot bends in a perfect arc—is physically inaccurate for these systems. Friction and cable stretch cause joint angles to taper, decreasing from the base toward the tip. For instance, in a segment intended to rotate all joints by 6°, friction resulted in the first joint reaching nearly 8° while the last reached only about 4°.
Friction and Stiffness
The study revealed that driving cable friction at contact holes is the dominant factor influencing the robot's shape. Interestingly, while larger synchronous mechanisms introduce more friction, their increased stiffness more than compensates for it, resulting in superior overall performance compared to smaller designs.
Conclusion
This research provides a robust framework for simulating high-stiffness continuum manipulators. The integration of ALE formulations and model smoothing allows for near real-time simulation without sacrificing accuracy regarding complex friction behaviors. Future work will focus on integrating gravity for terrestrial applications and optimizing mechanical parameters to further enhance synchronization accuracy.
Summary updated