Dual-Gated WTe2/MoSe2 van der Waals Tandem Solar Cells

Nicolas Cavassilas, Demetrio Logoteta, Youseung Lee, Fabienne Michelini, M. Lannoo, Marc Bescond, Mathieu Luisier

TL;DR

Researchers have designed a novel tandem solar cell using two-dimensional (2D) materials (WTe₂ and MoSe₂) connected by a dual-gate-controlled van der Waals heterojunction. This design allows for electrostatic tuning to optimize photocurrent matching between the subcells, predicting a high power conversion efficiency of 30.7%, a significant leap for such thin-film devices.

What Problem Does This Paper Address?

The quest for highly efficient solar cells is ongoing, with a particular focus on exceeding the theoretical Shockley-Queisser limit for single-junction cells. Multi-junction solar cells offer a path to higher efficiencies by stacking materials with different band gaps to capture a broader spectrum of sunlight. However, traditional multi-junction cells face challenges with lattice matching between layers, complex fabrication, and high costs. This paper addresses these limitations by proposing a novel tandem solar cell architecture based on 2D transition metal dichalcogenides (TMDs), which inherently offer flexibility in material combination due to the absence of dangling bonds and van der Waals interactions. The goal is to achieve high efficiency while simplifying fabrication and reducing costs.

Methods

The researchers employed a multi-scale approach, combining atomistic simulations with a semi-classical drift-diffusion solver (SCAPS). The core of their method involves numerically investigating a tandem solar cell composed of a WTe₂ monolayer (small band gap) and a MoSe₂ monolayer (wide band gap). These are connected via a van der Waals heterojunction that is electrostatically controlled by a dual-gate system. This dual-gate allows for tuning the band alignment of the heterojunction, enabling interlayer tunneling and thus an electronic connection between the subcells. The dual-gate also provides a means to adjust the electric field within each subcell, which is crucial for matching the photocurrents generated in each layer. To account for optimal light absorption, they assumed the cells are embedded in a light-trapping microcavity, theoretically achieving over 90% absorptance.

Datasets

Not discussed in the paper. The study relies on theoretical modeling and simulation rather than experimental datasets for training or evaluation.

Key Insights and Ideas

  • Dual-Gate Control for Photocurrent Matching: The most significant insight is the use of a dual-gate to electrostatically control the van der Waals heterojunction. This allows for fine-tuning the electronic connection and, crucially, matching the photocurrents generated in the WTe₂ and MoSe₂ subcells. This is a key factor in maximizing the efficiency of a tandem solar cell, as the overall current is limited by the subcell with the lower current.
  • Lattice Mismatch Tolerance: The van der Waals nature of the heterojunction inherently allows for combining materials with different lattice constants without the stringent requirements of traditional epitaxial growth. This greatly simplifies fabrication and expands the material choices.
  • Tunneling Junction for Interconnection: The dual-gate facilitates a type II to type III band alignment transition, creating an interlayer tunneling window. This allows for efficient electron-hole recombination and continuity of current, effectively connecting the two subcells without the need for complex doping profiles or additional interlayers.
  • Potential for High Efficiency with 2D Materials: The study demonstrates that 2D TMDs, when configured in a tandem structure with electrostatic control, can achieve power conversion efficiencies significantly higher than their individual counterparts, approaching levels competitive with established multi-junction technologies.

Key Results

  • The proposed dual-gated WTe₂/MoSe₂ tandem solar cell, under optimal light-trapping conditions, predicts a power conversion efficiency (PCE) of 30.7%.
  • This PCE significantly exceeds the individual PCEs of the WTe₂ (17.5%) and MoSe₂ (23.0%) subcells.
  • The dual-gate voltage (V<0xE1><0xB5><0x82>) was found to be critical for optimizing performance. When V<0xE1><0xB5><0x82> = 0 V, the PCE drops to 15.6%.
  • The tandem cell achieved an open-circuit voltage (V<0xE1><0xB5><0x92><0xE1><0xB5><0x84>) of 1.54 V, close to the theoretical maximum sum of individual V<0xE1><0xB5><0x92><0xE1><0xB5><0x84>s.
  • An optimal fill factor of 0.89 was achieved, comparable to or better than the individual subcells.
  • Even without an advanced light-trapping system, replacing it with a simple back mirror yielded a promising PCE of 5.86%.

Limitations and Future Work

  • Technological Challenge of Light Trapping: The authors acknowledge that the predicted 30.7% PCE relies on an auxiliary light-trapping system, the fabrication of which presents a significant technological challenge.
  • Experimental Validation: While the simulations are based on established physics and calibrated models, experimental validation of this specific dual-gated tandem cell architecture is the logical next step.
  • Exploring Other TMD Combinations: The success of this design suggests that other combinations of 2D TMDs could be explored to further optimize performance and tailor band gaps for specific applications.
  • Impact of Defects and Interfaces: While van der Waals heterojunctions offer lattice mismatch tolerance, the precise nature of the interface and potential defects could influence performance and warrants further investigation.

Summary updated

Abstract

We propose and numerically investigate, through a multiscale approach, a tandem solar cell based on a van der Waals heterostructure comprising of two monolayers of transition-metal dichalcogenides. The electronic connection between the two subcells is obtained via tunneling through the van der Waals heterojunction, which is electrostatically controlled by means of a dual gate. Furthermore, by adjusting the dual-gate voltages, the photocurrents in the two subcells can be matched and the tandem cell performances can be optimized. Assuming an optimal absorptance, as expected in light-trapping systems, we predict that a power conversion efficiency of 30.7%, largely exceeding that of the single subcells, can be achieved. The proposed design being suitable for other van der Waals heterojunctions shows that it represents a viable option for future high-efficiency photovoltaic systems.
BibTeX
@article{cavassilas2018dual,
  author = {Nicolas Cavassilas and Demetrio Logoteta and Youseung Lee and Fabienne Michelini and M. Lannoo and Marc Bescond and Mathieu Luisier},
  title = {{Dual-Gated WTe<sub>2</sub>/MoSe<sub>2</sub> van der Waals Tandem Solar Cells}},
  journal = {The Journal of Physical Chemistry C},
  year = {2018},
  doi = {10.1021/acs.jpcc.8b09905},
}
Figure