Disturbance Modeling, Simulation and Testing of Solar Array Drive Assembly

Xue Li, Wei Cheng, Wei HanInternational Journal of Hybrid Information Technology 2014 · DOI

Abstract

Solar panels are critical structures for spacecraft, and the Solar Array Drive Assembly (SADA) is frequently employed as the drive mechanism for step-skipped attitude adjustments. This paper investigates the disturbance mechanisms produced by an operating SADA and their coupling with electro-mechanical systems and payloads. A comprehensive disturbance model encompassing dead, rigid, and flexible loads was established and validated through both simulation and experimental measurement. Furthermore, the concept of "electromagnetic rigidity" was proposed to analyze the SADA disturbance mechanism, with its existence verified through rigorous testing and simulation.

Introduction

Modern spacecraft, particularly those dedicated to high-resolution imaging or deep-space communication, demand extreme pointing accuracy. Even minute "micro-vibrations" can significantly degrade image quality or disrupt sensitive data links. A primary source of these disturbances is the Solar Array Drive Assembly (SADA), which utilizes stepper motors to rotate large solar panels to maintain optimal sun orientation.

However, the inherent "step-by-step" operation of these motors creates disturbances. While previous research often focused solely on the motors, this study addresses the critical gap in understanding how motor disturbances couple with the mechanical properties of solar panels—which are typically large, flexible structures—and how the motor's internal magnetic fields contribute to the system's overall stiffness.

Modeling and Experimental Methodology

The research utilizes a three-tiered approach to model and validate SADA disturbances:

  1. Hierarchical Modeling: Three distinct mathematical models were developed: a Dead Load (motor in isolation), a Rigid Load (motor driving a solid mass to study inertia), and a Flexible Load (motor driving a flexible plate to simulate real-world solar array dynamics).
  2. Simulation Framework: Using MATLAB/Simulink, the team constructed a complex simulation of a two-phase hybrid stepper motor. This model integrates electrical equations (voltage/current), electromagnetic equations (torque production), and mechanical motion equations to predict angular displacement.
Block diagram of the SADA simulation model, integrating electrical, electromagnetic, and kinematic equations.
  1. Experimental Validation: To verify the models, a high-precision, six-axis vibration testing table was employed. The system measured actual current, tangential acceleration, and torque produced by a physical SADA unit under various load conditions. Parameters for the hybrid stepper motor were derived from manufacturer specifications and real-time telemetry from the testing table.

Key Insights: Electromagnetic Rigidity and Frequency Fingerprints

A central contribution of this work is the definition of $k_d$, or electromagnetic rigidity. This concept treats the magnetic bond between the motor's stator and rotor as a virtual torsional spring. This virtual spring significantly influences the system's resonant frequencies and must be accounted for to accurately predict the natural frequency of the entire spacecraft. Effectively, the motor acts as a structural component even when stationary.

Furthermore, the researchers identified that SADA disturbances possess specific "frequency fingerprints" rather than random noise. These base frequencies ($f_1$ and $f_2$) are directly tied to rotation speed and the subdivision of electrical pulses. While micro-stepping (subdividing steps) improves smoothness, it shifts vibration energy into different frequency bands, interacting uniquely with the load.

Results and Validation

The study confirmed that the disturbance is not merely a property of the motor but a result of the interaction between the motor's electronics and the load's mechanics. Key findings include:

  • Model Accuracy: Simulation results for electromagnetic frequency demonstrated high fidelity to experimental data, with error rates typically ranging between 3.07% and 3.37%.
  • Frequency Identification: At a standard rotation speed of 0.058°/s, the team identified critical base frequencies at 0.193 Hz (current cycle) and 49.5 Hz (pulse frequency).
Frequency spectrum of SADA disturbances at a rotation speed of 0.058°/s, showing characteristic peaks at approximately 50 Hz and 100 Hz.
  • Rigidity Verification: The experiments confirmed that as rotary inertia ($J$) increases, the electromagnetic frequency ($f_d$) decreases, validating the relationship $f_d = \frac{1}{2\pi}\sqrt{\frac{k_d}{J}}$. This proves that magnetic stiffness is a predictable physical quantity.

Conclusion and Future Work

While the physical experiments encountered some environmental noise and bending moment sensitivities, the established models provide a robust reference for analyzing micro-vibrations in spacecraft components. Future work will involve integrating this SADA model into full-spacecraft simulations to quantify the impact of these vibrations on specific optical payloads and pixel-level imaging quality. This methodology can also be extended to other moving spacecraft components, such as high-gain antennas or momentum wheels.

Summary updated

Abstract

Solar panel is an important structure of the spacecraft, SADA (Solar Array Drive Assembly is often used as the drive organ to realize the step-skipped gesture adjustment. Firstly, the dis turbance mechanism impact, which was produced from working SADA, to the electro-mechan ism and payload coupling has been taken into account, and the dead, rigid and flexible load S ADA disturbance model was established and validated through simulation and experimental measuring. Secondly, implemented the experimental check, calibration and correction to the mathematical model. Finally, the definition of electrical rigidity was proposed to analyze the disturbance mechanism of SADA, and verified its existence through simulation and testing.
BibTeX
@article{li2014disturbance,
  author = {Xue Li and Wei Cheng and Wei Han},
  title = {{Disturbance Modeling, Simulation and Testing of Solar Array Drive Assembly}},
  journal = {International Journal of Hybrid Information Technology},
  year = {2014},
  doi = {10.14257/ijhit.2014.7.2.13},
}
Figure