Dispersion of High-Pressure Hydrogen Jets in Open-Top and Indoor Environments: Effects of Leak Geometry and Pressure

Yang Li, Shourui Zhang, Meng Yu, Yang Wu, Jiake Wu, Jiang LongHydrogen 2025 · DOI

TL;DR

This study experimentally investigates how different hydrogen leak orifice geometries (circular, slit, Y-type) affect dispersion and concentration in open and indoor environments. The findings reveal that Y-type orifices pose the highest risk due to rapid, widespread dispersion and high concentrations, underscoring the need for geometry-specific safety measures in high-pressure hydrogen storage.

What Problem Does This Paper Address?

The increasing adoption of hydrogen as a clean energy source, particularly through high-pressure gaseous storage, brings significant safety concerns, primarily related to leakage. While previous research has largely focused on confined or semi-confined environments, there's a critical gap in understanding hydrogen dispersion in open, unshielded settings. This is particularly relevant as storage pressures rise, increasing the potential hazard. This paper aims to fill this gap by systematically examining how the geometry of the leak orifice—a crucial factor in controlling the release—influences the spatial distribution, temporal evolution, and overall risk of hydrogen leaks in both indoor and open-top environments. Understanding these differences is vital for developing effective safety protocols, sensor placement strategies, and emergency response thresholds.

Methods

The researchers employed a controlled experimental setup to simulate high-pressure hydrogen leaks. The core of their methodology involved:

  • Hydrogen Leakage Simulation Device: A cylindrical pressure vessel was used to store and release hydrogen at a controlled pressure (3 MPa).
  • Orifice Geometry Variation: Three distinct orifice types were tested: circular, slit, and Y-type, with varying diameters (0.1 mm, 0.5 mm, 1 mm).
  • Controlled Environments: Experiments were conducted in both an indoor (12m x 6m x 6m) and an outdoor open-top (5m x 4m x 3m) test space. The indoor environment was designed to minimize wall reflections, while the outdoor space was subject to natural wind effects.
  • Hydrogen Concentration Monitoring: An array of hydrogen concentration sensors was strategically placed within the test volumes to capture real-time concentration data. The placement was designed to map the dispersion plume and response times.
  • Data Acquisition and Analysis: A comprehensive data acquisition system recorded hydrogen concentration, pressure, and wind speed/direction. This data was then analyzed to determine equilibrium times, peak concentrations, response times, and spatial distribution patterns for each orifice type and size.

Datasets

Not discussed in the paper. The study relies on experimental data generated from controlled simulations rather than pre-existing datasets.

Key Insights and Ideas

  • Orifice Geometry is Paramount: The shape of the leak orifice is not just a minor detail; it fundamentally dictates the dispersion pattern and associated risk. This is a significant takeaway, moving beyond simple pressure and size considerations.
  • Y-Type Orifices are High-Risk: The Y-type orifice, designed to split the flow, leads to rapid, multi-directional dispersion and significantly higher concentrations, bringing the mixture closer to the Lower Explosive Limit (LEL) much faster than other geometries. This suggests a need for specialized monitoring for such designs.
  • Open vs. Indoor Environments: While the paper focuses on open-top and indoor environments, the abstract highlights that previous work was mostly in closed/semi-closed spaces. This study's contribution is in characterizing open environments, where natural wind can introduce significant fluctuations and affect dispersion.
  • Equilibrium and Response Times Vary Dramatically: The time it takes for concentrations to stabilize (equilibrium time) and for sensors to detect a leak (response time) are highly dependent on orifice geometry and size, with Y-type leaks showing the fastest responses.

Key Results

  • Concentration Levels:
    • Circular orifices produced directional jets with steep gradients and relatively low concentrations (e.g., 0.725% at 1 mm).
  • Slit orifices showed more uniform diffusion, with concentrations reaching up to 2.625% at 1 mm.
  • Y-type orifices exhibited the highest hazard, with 0.5 mm leaks producing 2.9% and 1 mm cases approaching the 4% LEL.
  • Equilibrium Times:
    • Circular orifices: 400-800 s (increasing with size).
  • Slit orifices: 600-800 s.
  • Y-type orifices: up to 900 s, with some 1 mm cases failing to stabilize within the test duration.
  • Response Times:
    • Y-type leaks achieved rapid multi-point responses (as short as 10 s).
  • Circular and slit leaks responded more slowly, especially away from the direct jet core.
  • Risk Ranking: The study established a clear risk hierarchy: Circular < Slit < Y-type.

Limitations and Future Work

  • Limited Orifice Sizes and Pressures: The study focused on specific orifice sizes and a single pressure (3 MPa). Future work could explore a wider range of these parameters to build a more comprehensive model.
  • Simplified Environments: While the study differentiates between indoor and open-top, more complex real-world scenarios involving obstacles, varying wind conditions, and multiple leak points were not simulated.
  • Specific Y-Type Geometry: The "Y-type" orifice is a specific design; exploring variations in Y-junction angles or branching could yield further insights.
  • Future Directions: The authors emphasize the need for geometry-specific safety strategies, sensor layouts, and emergency thresholds. They also suggest future research on complex morphologies, more realistic environmental conditions, and the development of intelligent monitoring systems to enhance the intrinsic safety of hydrogen systems.

Summary updated

Abstract

Hydrogen leakage is a critical safety concern for high-pressure storage systems, where orifice geometry significantly influences dispersion and risk. Previous studies on leakage and diffusion have mostly focused on closed or semi-closed environments, while thorough exploration has been conducted on open and unshielded environments. This work compares three typical orifice types—circular, slit, and Y-type—through controlled experiments. Results show that circular orifices generate directional jets with steep gradients but relatively low concentrations, with a 1 mm case reaching only 0.725% at the jet core. Slit orifices exhibit more uniform diffusion; at 1 mm, concentrations ranged from 2.125% to 2.625%. Y-type orifices presented the highest hazard, with 0.5 mm leaks producing 2.9% and 1 mm cases approaching the 4% lower flammability limit within 375 s. Equilibrium times increased with orifice size, from 400–800 s for circular and slit leaks to up to 900 s for Y-type leaks, some of which failed to stabilize. Response behavior also varied: Y-type leaks achieved rapid multi-point responses (as short as 10 s), while circular and slit leaks responded more slowly away from the jet core. Overall risk ranking was circular &lt; slit &lt; Y-type, underscoring the urgent need for geometry-specific monitoring strategies, sensor layouts, and emergency thresholds to ensure safe hydrogen storage.
BibTeX
@inproceedings{li2025dispersion,
  author = {Yang Li and Shourui Zhang and Meng Yu and Yang Wu and Jiake Wu and Jiang Long},
  title = {{Dispersion of High-Pressure Hydrogen Jets in Open-Top and Indoor Environments: Effects of Leak Geometry and Pressure}},
  booktitle = {Hydrogen},
  year = {2025},
  doi = {10.3390/hydrogen6040107},
}

Loading related content...

Figure