Direct Visualization of Perm-Selective Ion Transportation

Won‐Seok Kim, Jung‐Eun Lee, G.s. Yun, Gun Yong Sung, Sung Jae KimScientific 2020 · DOI

Abstract

Perm-selective ion transportation in nanoscale structures like nanochannels and nanoporous membranes is fundamental to many innovative applications. Traditionally, observation of this phenomenon has relied on indirect methods such as current-voltage analysis or fluorescent imaging. Here, we present the first direct visualization of perm-selective ion transportation through a nanoscale space using ionic plasma generation. By employing a micro/nanofluidic device, we demonstrate microbubble formation, plasma generation, and the subsequent penetration of plasma filaments through a nanojunction. This technique provides visual evidence of perm-selectivity—allowing cations while rejecting anions—and reveals that lithium ions, once dehydrated in the plasma state, exhibit higher mobility than sodium ions.

Introduction

Understanding ion transport through nanoscale spaces—such as pores in battery membranes or desalination filters—is critical for advancing energy and water technologies. However, "seeing" this process is notoriously difficult due to the sub-10nm scales involved. Researchers have traditionally relied on "black box" metrics like electrical current measurements or fluorescent dyes that congregate near, but not inside, the junction. This study aims to open that box by using the light-emitting properties of plasma to track ions in real-time as they traverse the nanoscale gap.

Experimental Methods

The researchers developed a three-step process using a polydimethylsiloxane (PDMS) microfluidic chip integrated with a Nafion nanojunction (pores ~10nm).

  1. Microbubble Formation: A low voltage (~50V) is applied to induce Joule heating, boiling the electrolyte (NaCl or LiCl) to create a stable water vapor bubble.
  2. Plasma Generation: A high voltage (>500V) triggers an electrical breakdown of the gas inside the bubble, creating an ionic plasma where ions (Na+, Li+, Cl-) emit characteristic "flame colors."
  3. Plasma Penetration: By grounding the opposite side of the nanojunction, plasma filaments are pulled through the nanoscale pores.
Schematic of the three-step experimental process (a) and the physical PDMS-on-glass microfluidic device (b).

A high-speed camera (250 fps) captures the light. Since different ions emit specific wavelengths—Yellow for Sodium, Red for Lithium, and Violet for Chlorine—the light acts as a chemical tracer.

Results and Discussion

Visual Proof of Perm-selectivity

The most significant observation occurred when the plasma encountered the Nafion junction. While yellow (Na) and red (Li) light successfully passed through, violet light (Cl) was rejected. This provides direct visual evidence of the "Debye sheath" effect, where the negatively charged walls of the nanojunction repel anionic chlorine, barring its entry.

Detailed view of Step 3: Plasma filaments penetrating the nanojunction, demonstrating ion transport.

The Mobility Flip and Dehydration

In aqueous solutions, sodium ions typically move faster than lithium ions because lithium's smaller size attracts a larger, more cumbersome "hydration shell" of water molecules. However, in the plasma state, these shells are stripped away. High-speed imaging revealed that lithium plasma filaments traveled faster than sodium ones. This confirms that without the "dead weight" of water molecules, the lighter lithium ion is naturally more mobile—a finding with significant implications for high-efficiency battery design.

Conclusion and Future Outlook

This work demonstrates the first direct visualization of ion transport through a 10nm-scale space. While currently a powerful qualitative tool, the technique faces limitations in sensitivity (e.g., failing to detect weak potassium emissions) and potential interference from dissolved gases like $O_2$.

Future refinements, such as integrating high-resolution spectroscopic equipment like Photomultiplier Tubes (PMT), could transform this visualization technique into a powerful new analytical platform. Such a system would allow for the detection of a wider array of ions at lower concentrations, providing deeper insights into fundamental nanoscale electrokinetics and interfacial ion transportation.

Summary updated

Abstract

Perm-selective ion transportation in a nanoscale structure such as nanochannel, nanoporous membrane or nanojunction has been extensively studied with aids of nanofabrication technology for a decade. While theoretical and experimental advances pushed the phenomenon to seminal innovative applications, its basic observation has relied only on an indirect analysis such as current-voltage relation or fluorescent imaging adjacent to the nanostructures. Here we experimentally, for the first time, demonstrated a direct visualization of perm-selective ion transportation through the nanoscale space using an ionic plasma generation. A micro/nanofluidic device was employed for a micro bubble formation, plasma negation and penetration of the plasma along the nanojunction. The direct observation provided a keen evidence of perm-selectivity, i.e. allowing cationic species and rejecting anionic species. Furthermore, we can capture the plasma of lithium, which has lower mobility than sodium in aqueous state, passed the nanojunction faster than sodium due to the absence of hydrated shells around lithium. This simple, but essential visualization technique would be effective means not only for advancing the fundamental nanoscale electrokinetic study as well as interfacial ion transportation between liquid and plasma but also for providing the insight of new innovative engineering applications.
BibTeX
@inproceedings{kim2020direct,
  author = {Won‐Seok Kim and Jung‐Eun Lee and G.S. Yun and Gun Yong Sung and Sung Jae Kim},
  title = {{Direct Visualization of Perm-Selective Ion Transportation}},
  booktitle = {Scientific},
  year = {2020},
  doi = {10.1038/s41598-020-65433-y},
}
Figure