Dimension Reduction of Compressible Fluid Models over Product Manifolds

Siran Li

Abstract

In this paper we study the dimension reduction limits of the compressible Navier--Stokes equations over product Riemannian manifolds $\mathcal{O}_ε\cong \mathcal{M} \times ε\mathcal{F}$, such that $\dim\,(\mathcal{M})=n$ and $\dim\,(\mathcal{F})=d$ are arbitrary. Using the method of relative entropies, we establish the convergence of the suitable weak solutions of the Navier--Stokes equations on $\mathcal{O}_ε$ to the classical solution of the limiting equations on $\mathcal{M}$ as $ε\rightarrow 0^+$, provided the latter exists. In addition, we also deduce the vanishing viscosity limit. The limiting equations identified through our analysis contain the weight function $A:\mathcal{M} \rightarrow \mathbb{R}^+$ as a parameter, where $A(x)$ = area of fibre $\mathcal{F}_x$. Our work is based on and generalises the results in P. Bella, E. Feireisl, M. Lewicka and A. Novotný, A rigorous justification of the Euler and Navier--Stokes equations with geometric effects, SIAM J. Math. Anal., 48 (2016), 3907--3930, and it contains as special cases the physical models of circular nozzles, thin plate limits and finite-length longitudinal nozzles.

Introduction

In fluid mechanics, researchers frequently encounter domains that are significantly thinner in some directions than others. Examples include fuel flowing through microscopic nozzles, air moving over thin aerodynamic surfaces, or water in shallow pipes. While these systems can be modeled using the full $N$-dimensional compressible Navier–Stokes equations, doing so is often computationally prohibitive and analytically complex.

This paper addresses the problem of dimension reduction: providing a rigorous mathematical justification for simplified, lower-dimensional "effective" equations that capture the essential physics as the domain's thickness (denoted by $\epsilon$) vanishes. By generalizing previous work that focused on specific 3D-to-1D reductions, this research establishes a framework for reducing flow over any product manifold $\mathcal{M} \times \epsilon\mathcal{F}$ to a base manifold $\mathcal{M}$ of arbitrary dimension.

Mathematical Methodology

The study employs several sophisticated tools from geometric analysis and partial differential equations (PDEs) to prove the convergence of solutions as $\epsilon \to 0$.

Relative Entropy Method

The primary analytical tool is the relative entropy method. This serves as a mathematical "yardstick" to measure the distance between a "suitable weak solution" (a mathematically rough solution that satisfies an energy-like inequality) of the complex $N$-dimensional system and a "classical solution" (a smooth, well-behaved solution) of the simplified $n$-dimensional system. The goal is to show that this distance vanishes in the limit.

Canonical Lifting

To compare vector fields across different dimensions, the author constructs a "canonical lift." This involves solving a Neumann problem for the Poisson equation on each fiber of the manifold. This ensures that the lifted field from the base manifold $\mathcal{M}$ respects the boundary conditions of the original higher-dimensional domain $\mathcal{O}_\epsilon$.

Gromov–Hausdorff Convergence

The paper utilizes the language of Gromov–Hausdorff convergence to formally describe the geometric collapse of the domain. This provides the rigorous foundation for treating the product space as it converges toward its base manifold.

Key Insights and Theoretical Findings

The Geometric Weight Function

A central discovery of the analysis is that the varying area of the cross-sections, represented by the function $A(x)$, fundamentally alters the limiting equations. This manifests in two primary ways:

  1. Weighted Continuity: The mass conservation equation becomes weighted by $A(x)$. The fluid effectively "perceives" changes in the width of the domain as changes in density.
  2. Geometric Viscosity: The momentum equation gains an additional term, $\mathfrak{T}(A, \hat{u})$, which is proportional to the Hessian of the log-area ($\nabla \nabla \log A$). This term appears specifically in the viscous part of the equation, showing that the geometry of the domain directly influences the internal friction of the fluid.

Simultaneous Vanishing Viscosity Limit

The author demonstrates that it is possible to take two limits simultaneously: shrinking the domain thickness ($\epsilon \to 0$) and removing the fluid's viscosity ($\mu, \eta \to 0$). This proves that thin-domain Navier–Stokes equations can converge directly to the lower-dimensional Euler equations, which describe ideal, inviscid fluid flow.

Principal Results

  • Theorem 4.1 (Dimension Reduction): This theorem establishes that if a smooth solution exists for the limiting equations on the base manifold $\mathcal{M}$, then any suitable weak solution on the thin domain $\mathcal{O}_\epsilon$ must converge to it as $\epsilon \to 0$.
  • Theorem 4.3 (Simultaneous Limit): This result confirms the convergence to the Euler equations when both the domain thickness and the viscosity vanish at the same time.
  • Weak-Strong Stability: The findings imply a form of stability where the strong (smooth) solution of the simplified model acts as an "attractor" for all weak solutions of the complex model as the domain becomes sufficiently thin.

Limitations and Future Research

While this work provides a robust generalization of dimension reduction, several challenges remain:

  • Smoothness Requirements: The proof relies on the existence of a classical (smooth) solution for the limiting equations. In compressible fluid dynamics, proving the global-in-time existence of such solutions remains a major open problem.
  • Uniform Korn’s Inequality: The results require the domain to support a "uniform Korn’s inequality" as it shrinks. While this holds for standard geometries like nozzles and plates, it may not apply to all types of geometric collapses.
  • Trivial vs. Non-Trivial Bundles: This study focuses on product manifolds (trivial fiber bundles). Future research could extend this to non-trivial bundles where the fiber's orientation or "twist" changes relative to the base manifold.
  • Vacuum States: The current framework assumes the fluid density $\rho$ remains bounded away from zero. Handling vacuum states (regions of zero density) remains a significant hurdle in the study of compressible limits.

Summary updated

Abstract

In this paper we study the dimension reduction limits of the compressible Navier--Stokes equations over product Riemannian manifolds $\mathcal{O}_ε\cong \mathcal{M} \times ε\mathcal{F}$, such that $\dim\,(\mathcal{M})=n$ and $\dim\,(\mathcal{F})=d$ are arbitrary. Using the method of relative entropies, we establish the convergence of the suitable weak solutions of the Navier--Stokes equations on $\mathcal{O}_ε$ to the classical solution of the limiting equations on $\mathcal{M}$ as $ε\rightarrow 0^+$, provided the latter exists. In addition, we also deduce the vanishing viscosity limit. The limiting equations identified through our analysis contain the weight function $A:\mathcal{M} \rightarrow \mathbb{R}^+$ as a parameter, where $A(x)$ = area of fibre $\mathcal{F}_x$. Our work is based on and generalises the results in P. Bella, E. Feireisl, M. Lewicka and A. Novotný, A rigorous justification of the Euler and Navier--Stokes equations with geometric effects, \textit{SIAM J. Math. Anal.}, \textbf{48} (2016), 3907--3930, and it contains as special cases the physical models of circular nozzles, thin plate limits and finite-length longitudinal nozzles.
BibTeX
@article{li2018dimension,
  author = {Siran Li},
  title = {{Dimension Reduction of Compressible Fluid Models over Product Manifolds}},
  journal = {Journal of Differential Equations},
  year = {2018},
  doi = {10.1016/j.jde.2018.07.041},
}
Figure