Abstract
In today's transmission and distribution system, large transformers are widely equipped with on-load tap changer (hereinafter referred to as OLTC) to ensure the voltage quality of the system and users. Due to the complex mechanical structure and high operation frequency, there are often abnormal situations during the operating and functioning process. This paper focuses on a tool for OLTC maintenance equipment, especially for OLTC core barrel removal.
Introduction
Large power transformers utilize On-load Tap Changers (OLTC) to regulate voltage levels without interrupting the power supply to the grid. Given their complex mechanical nature and high frequency of operation, these components are prone to wear and require periodic maintenance or repair. A critical step in this process is the disassembly of the OLTC core barrel from its jacket.
Traditionally, this disassembly is performed using a crane to lift the core barrel. However, this method presents significant challenges, particularly in the confined spaces of indoor substations where crane maneuverability is limited. The lack of fine control over lifting forces often results in "jerking" motions, which can damage delicate OLTC components and pose safety risks to maintenance personnel.
Proposed Methodology
To address these issues, a specialized core barrel removal tool has been developed. This tool replaces the raw lifting power of a crane with a precision-controlled mechanical advantage system.
The tool's architecture consists of three primary components:
- Crossed Horizontal Bracket: Acts as a stable base that rests on the top of the OLTC jacket.
- Symmetrical Vertical Screws: These pass through long holes in the bracket.
- Screw-Thread Mechanism: Each screw features upper and lower threaded sections. The lower threads are secured to the core barrel, while the upper threads are fitted with nuts that bear against the bracket.
By rotating the nuts, operators can lower the screws and the attached core barrel with high precision. This "slow-release" mechanism allows for the gradual separation of the core barrel from the jacket, eliminating the need for external lifting equipment.
Design Insights and Advantages
The design of the tool offers several engineering advantages:
- Precision Control: The screw-driven system provides tactile feedback and incremental movement, which is essential for handling delicate mechanical components without causing impact damage.
- Spatial Efficiency: Because the tool is mounted directly onto the transformer jacket, it eliminates the need for overhead clearance required by cranes. This makes it particularly suitable for maintenance in cramped or indoor substation environments.
- Balanced Force Distribution: The crossed structure of the bracket ensures that the load is distributed evenly across multiple points. This prevents the core barrel from tilting or binding during the removal process, which is a common failure mode in crane-assisted lifts.
Results and Conclusion
The implementation of this specialized tool leads to several qualitative improvements in maintenance operations. It reduces the manpower required for disassembly and significantly enhances safety by removing the risks associated with crane cables and unpredictable lifting forces. Furthermore, the controlled separation protects expensive equipment from the mechanical shocks often encountered during traditional removal methods.
While the current design focuses on the mechanical logic and structural integrity, future work may involve material optimization for higher load capacities and the potential for motorized synchronization to further streamline the process. This tool represents a significant step forward in the standardization and safety of OLTC maintenance.
Summary updated