Development of dicing technique for thin semiconductor substrates with femtosecond laser ablation

Kosuke Kawahara, Yasunobu Kurogi, Naoyuki Matsuo, Takafumi Ninomiya, Hiroshi Sawada, Atsushi Yokotani, Kou KurosawaProceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 2003 · DOI

Abstract

Femtosecond laser has been expected as a new tool for the industrial usage in particular to material micromachining. We are developing the dicing technique with femtosecond laser ablation for the ultra thin semiconductor substrates, which are 50 &mu;m thick or less. In this research, we performed drilling for 50 &mu;m thick silicon substrate with femtosecond laser (&pi;=120 fs, &lambda;=800 nm, <i>F</i>=1 kHz) as the basic experiment for dicing, focusing on the influence of a double-pulse irradiation on the processing characteristics. The double-pulse irradiation for 18 shots of 10 &mu;J/pulse at the pulse separation time from 10 to 20 ps showed the remarkable reduction of the height of the molten layer around the drilled hole (<0.5 &mu;m). At the same time, however, the ablation depth was the minimum (<2.3 &mu;m). The surface inside the hole got smooth as the pulse separation time of more than 3 ps. We supposed that the second pulse in a double-pulse should generate the another ablation on the surface and its high pressure should prevent the ablated materials by the first pulse from flying out of the hole.
BibTeX
@inproceedings{kawahara2003development,
  author = {Kosuke Kawahara and Yasunobu Kurogi and Naoyuki Matsuo and Takafumi Ninomiya and Hiroshi Sawada and Atsushi Yokotani and Kou Kurosawa},
  title = {{Development of dicing technique for thin semiconductor substrates with femtosecond laser ablation}},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year = {2003},
  doi = {10.1117/12.486542},
}

Loading related content...

Figure