Abstract
A sonic boom pressure profile was simulated in the far-field by detonation of a methane-oxygen mixture contained in a slender, shaped Mylar envelope. Ideal N-waves were synthesized with peak overpressures from two to five psf and durations of 30 to 75 milliseconds. The detonation of the gas mixture was initiated by a single Primacord strand running the length of the balloon. The N-wave producing balloon was synthesized as a composite structure, utilizing experimental pressure profiles obtained from the detonations of slender, axisymmetric balloons with elementary, non-cylindrical shapes.
Introduction
The commercialization of supersonic transport (SST) hinges on understanding the impact of sonic booms on terrestrial environments, including structural integrity and biological responses. However, utilizing actual supersonic aircraft for large-scale testing is economically prohibitive and socially disruptive. Existing simulators in the early 1970s faced significant technical hurdles: solid explosives often introduced high-frequency "hash" noise absent in real booms, while mechanical simulators struggled to replicate the long durations (30–200 ms) and precise "N-wave" geometry—characterized by a sharp pressure rise, linear decay, and sharp return to ambient levels. This study presents a low-cost, mobile alternative using the controlled detonation of gaseous mixtures.
Methodology
The research utilized methane-oxygen mixtures contained within slender Mylar envelopes. The experimental program consisted of 38 controlled detonations at the NASA Langley Sonic Boom Simulation range, structured into four distinct phases to systematically isolate variables:
- Baseline Characterization: Establishing pressure-range relationships using simple cylindrical envelopes (varying L/D ratios).
- Ignition Dynamics: Evaluating the impact of detonator placement and the use of Primacord (a high-velocity detonating cord) on wave stability.
- Geometric Tailoring: Testing elementary shapes, such as truncated cones, to determine how longitudinal diameter variations influence the pressure profile.
- N-Wave Synthesis: Designing "composite" balloons—integrating cylindrical and conical sections—to produce a target N-wave signature based on data from previous phases.
Balloons, reaching lengths up to 100 feet, were suspended 20 feet above the ground. A longitudinal Primacord strand ensured stable detonation. Data acquisition involved high-speed photography (4000 fps) and a six-microphone array capturing pressure-time histories at ranges up to 800 feet.
Key Insights and Results
Directional Ignition and Signal Quality
A critical finding was the necessity of directional ignition. Igniting the mixture from the end nearest the observer—causing the detonation wave to travel away—produced a clean, noise-free signal. Conversely, detonation traveling toward the observer introduced sinusoidal "wobble" or noise. Methane-oxygen mixtures proved superior to solid explosives by eliminating high-frequency "hash," providing a higher-fidelity acoustic simulation.
Geometric Influence Functions
The study demonstrated that balloon geometry acts as a physical "influence function." By mathematically combining the pressure profiles of elementary shapes, researchers could predict the output of composite structures. This allowed for the successful synthesis of ideal N-waves with peak overpressures of 2 to 5 psf and durations of 30 to 75 milliseconds. At closer ranges, the system demonstrated capabilities up to 15 psf.
Propagation and Scaling
The pressure profile matures into a clean N-wave as it propagates. For a given balloon length, full signal development occurs when the range-to-diameter ratio ($R/D_1$) exceeds 700. Furthermore, while signal duration scales with the cube root of the balloon's volume (energy), peak pressure is primarily determined by the diameter at the balloon's extremities. The study concluded with the development of a design nomograph to assist in determining balloon dimensions for specific target overpressures.
Discussion and Limitations
While effective, the system faces practical challenges. The long, slender Mylar balloons are highly sensitive to wind, requiring tethers every 10–15 feet to prevent oscillation. Additionally, the manufacturing of complex composite shapes is more labor-intensive than simple cylinders. The manual gas-loading process used in the study also limited throughput, suggesting a need for automated systems in future high-volume testing. However, the authors suggest that scaling to longer durations (100–200 ms) is feasible with larger suspension infrastructure.
Conclusion
The use of detonable gas mixtures in shaped Mylar envelopes provides a reliable and cost-effective method for simulating full-scale sonic booms. By leveraging geometric tailoring and directional ignition, researchers can synthesize high-fidelity N-waves suitable for environmental and structural impact studies, overcoming the limitations of both solid explosives and mechanical simulators.
Summary updated