TL;DR
This paper introduces a novel, portable data logger designed to capture human-machine interaction data from electric-powered wheelchairs controlled by a head-foot steering system, specifically for individuals with Dyskinetic Cerebral Palsy (DCP). This system is crucial for gaining deeper insights into the unique control mechanisms and driving behaviors of DCP patients, paving the way for improved clinical assessment, training, and assistive technology development.
What Problem Does This Paper Address?
Millions worldwide rely on wheelchairs for mobility, and advancements in technology have made monitoring and recording wheelchair usage more feasible. However, for individuals with complex motor disorders like Dyskinetic Cerebral Palsy (DCP), who often cannot use conventional joysticks, specialized control systems are necessary. DCP is characterized by involuntary movements and impaired muscle tone, making precise control challenging. While head-foot steering systems offer a solution, there's a significant gap in understanding the nuances of human-machine interaction within this specific population. Existing data logging systems are often not tailored to capture the specific control signals from these specialized systems or integrate user body movement data, hindering in-depth clinical research and the development of personalized assistive technologies.
Methods
The core of this work is a custom-designed, battery-powered data logger built using off-the-shelf components, primarily an Arduino Mega 2560 microcontroller. This logger interfaces directly with the head-foot steering system's pressure sensors on the wheelchair, capturing signals related to gas pedal input, steering commands, and braking. A key innovation is its ability to synchronize this wheelchair control data with data from multiple Inertial Measurement Units (IMUs) placed on the user's body (head, arms, legs). This synchronization is achieved through a master-slave IMU configuration, with the wheelchair-mounted IMU acting as the master to ensure a common time reference. The system also incorporates a 3-axis accelerometer for cross-correlation-based signal synchronization between the wheelchair and IMU data. Data is logged to an SD card and can be transmitted in real-time via Bluetooth for immediate visualization.
Datasets
The study utilized data collected from five DCP patients and one healthy subject performing standardized wheelchair driving tasks. These tasks included a 360° turn in place (both right and left) and a start-and-stop driving task over a 20m distance. The data collected included wheelchair sensor signals (gas pedal, steering, braking) and IMU data (acceleration and gyroscope) from various body parts. No new benchmark datasets were introduced; rather, the paper presents the application of the developed system to collect data for analysis.
Key Insights and Ideas
- Tailored Solution for DCP: The data logger is specifically designed to address the unique control challenges faced by individuals with DCP, who often rely on head-foot steering due to involuntary movements.
- Integrated User and Wheelchair Data: The ability to synchronize wheelchair control signals with IMU data from the user's body is a significant advancement, allowing for a holistic understanding of human-machine interaction.
- Clinical Tool Potential: The system's portability, ease of installation, and real-time visualization capabilities make it a valuable tool for clinical research, driving assessment, and the development of personalized training strategies for DCP patients.
- Distinguishing Driving Patterns: The collected data clearly revealed distinct differences in driving patterns between DCP patients and a healthy subject, highlighting challenges in control stability, activation consistency, and limb coordination among DCP users.
Key Results
- Synchronization Achieved: The system successfully synchronized wheelchair sensor data with IMU data using cross-correlation, with a lag of approximately 4641.5 milliseconds observed between the wheelchair's accelerometer and the master IMU's accelerometer.
- Power Consumption: The data logger's power consumption varied depending on its operational state, ranging from approximately 1238.76 mW (data logging only) to 1587.98 mW (data logging + Bluetooth search).
- Battery Life: Estimated run times varied significantly between alkaline and lithium batteries, with lithium batteries offering substantially longer operation (e.g., 8.72 hours for data logging only).
- Bluetooth Latency: The mean Bluetooth transmission latency for a full data packet was measured at 26.66 ms, with no packet loss or corrupted data observed in controlled environments.
- Driving Behavior Differences:
- DCP patients required significantly longer times to complete 360° turns compared to the healthy subject.
- Four out of five DCP patients needed multiple activations of the steering sensor for a single turn, unlike the healthy subject who maintained constant activation.
- DCP patients exhibited less stable gas pedal control and demonstrated involuntary pressure on the non-assigned left foot sensor, indicating poor lower limb coordination.
Limitations and Future Work
The authors acknowledge several limitations:
- System Specificity: The current data logger is custom-designed for the Adremo head-foot steering system and may not be directly applicable to other wheelchair control mechanisms.
- Future Control Mechanism Changes: If the Adremo system's control mechanism changes, the logger may require adaptation.
- Power Consumption: While manageable for short monitoring periods, the power consumption might be a consideration for extended use, though it can be powered directly from the wheelchair's batteries.
Future work could involve:
- Adaptability: Enhancing the system's reconfigurability to adapt to future changes in control mechanisms.
- Exergame Integration: Developing a computer-based environment or exergame that utilizes the captured wheelchair sensor data for virtual driving training.
- Involuntary Movement Analysis: Further investigating the effect of involuntary movements on driving skills by quantifying tremor characteristics, similar to studies on Parkinson's disease.
- Broader Application: Exploring the logger's applicability to other electric-powered wheelchairs and user populations with similar mobility challenges.
Summary updated