Abstract
The Internet of Medical Things (IoMT) requires communication systems that are both energy-efficient and capable of high data rates. This paper proposes a self-sustaining system for e-Health IoT devices that harvests energy from radio signals used for data transmission. By combining a multi-antenna base station with a novel "chaos-based" modulation scheme—MISO-SWIPT-Aided CIM-MC-M-DCSK—the system achieves significant improvements in data throughput and energy sustainability without requiring complex channel estimation.
Introduction
Power constraints represent a major bottleneck for the Internet of Medical Things (IoMT). Devices such as pacemakers or wearable sensors often have limited battery life, and replacing these batteries can be invasive or impractical. While 5G and beyond offer high speeds, traditional coherent communication requires constant Channel State Information (CSI) estimation, which is energy-intensive.
To address these challenges, this research introduces a system that is:
- Self-Sustaining: Utilizing Simultaneous Wireless Information and Power Transfer (SWIPT).
- Low Complexity: Employing non-coherent detection to bypass power-hungry channel estimation.
- High Speed: Using Code-Index Modulation (CIM) to increase the bits transmitted per symbol.
System Architecture
The proposed architecture utilizes a Multiple-Input Single-Output (MISO) configuration. A multi-antenna base station transmits signals to a single-antenna medical device. The receiver employs a power-splitting (PS) architecture to divide the incoming signal between an energy harvester and an information receiver.
The power-splitting ratio, $\phi$, serves as a critical parameter, balancing the trade-off between data decoding accuracy and the amount of energy harvested to charge the device's battery.
Modulation and Detection Mechanism
The core of the system is the CIM-MC-M-DCSK modulation scheme. It leverages chaotic signals, which are deterministic yet noise-like, providing inherent resistance to multipath fading.
- Multi-Carrier (MC): Spreads data across multiple subcarriers to enhance spectral efficiency.
- Code-Index Modulation (CIM): Uses orthogonal Walsh codes to represent additional information bits, effectively increasing the data rate without increasing bandwidth.
- Non-Coherent Detection: The receiver decodes information by correlating the received signal with a reference, eliminating the need for CSI.
Performance Evaluation
The system was evaluated using Monte Carlo simulations over a Multipath Rayleigh Fading Channel, a standard model for complex environments like hospitals. Key findings include:
- Spectral Efficiency: The system significantly outperforms benchmarks like CI-DCSK and SR-DCSK. Efficiency scales with the number of subcarriers ($N$) and the modulation order ($M$).
- Sustainability: Analytical derivations for "Energy Shortage Probability" confirm that the system remains operational as long as the harvested power exceeds the receiver's threshold.
- Diversity Gain: Increasing the number of base station antennas ($N_t$) provides a clear diversity gain, reducing the required Signal-to-Noise Ratio (SNR) for a target Bit Error Rate (BER).
Conclusion and Future Work
The MISO-SWIPT-Aided CIM-MC-M-DCSK system offers a robust solution for the energy-data trade-off in IoMT. While the system performs well, it faces an "error floor" at high SNR due to energy shortage—if the signal is too weak to power the device, data cannot be decoded regardless of signal clarity. Future research will explore multi-user scenarios and uplink transmissions where devices use harvested energy to send data back to the base station.
Summary updated