Design and Implementation of a Dual Uncrewed Surface Vessel Platform for Bathymetry Research Under High-Flow Conditions

Dinesh Kumar, Amin Ghorbanpour, Kin Yen, Iman Soltani

Abstract

Bathymetry, the study of underwater topography, relies on sonar mapping of submerged structures. These measurements, critical for infrastructure health monitoring, often require expensive instrumentation. The high financial risk associated with sensor damage or vessel loss creates a reluctance to deploy uncrewed surface vessels (USVs) for bathymetry. However, the crewed-boat bathymetry operations, are costly, pose hazards to personnel, and frequently fail to achieve the stable conditions necessary for bathymetry data collection, especially under high currents. There is a notable lack of accessible hardware platforms that allow for integrated research in both bathymetry-focused autonomous control and navigation, as well as data evaluation and processing. This paper addresses this gap through the design and implementation of two complementary USV systems tailored for uncrewed bathymetry research. This includes a low-cost USV for Navigation And Control research (NAC-USV) and a second, high-end USV equipped with a high-resolution multi-beam sonar and the associated hardware for Bathymetry data quality Evaluation and Post-processing research (BEP-USV). We detail the design and implementation of both systems and demonstrate the system's effectiveness in a range of operational scenarios.

Introduction

Monitoring the health of underwater infrastructure, such as bridge foundations, is a critical engineering challenge. Fast-moving water can cause "scouring," eroding sediment around piers and threatening structural integrity. While Uncrewed Surface Vessels (USVs) offer a safer and more efficient alternative to crewed boats for bathymetric surveys, two primary hurdles remain: extreme financial risk and environmental complexity. High-resolution Multi-Beam Echo Sounders (MBES) can cost over $120,000, making their deployment on experimental autonomous platforms in high-flow, obstacle-rich river environments a significant gamble. Furthermore, high currents and turbulence demand sophisticated navigation to maintain the stability required for high-quality sonar data.

System Architecture and Methodology

To address these challenges, this research proposes a Dual-USV Platform strategy. This approach utilizes a low-cost "stunt double" vessel for risky navigation testing and a high-end "production" vessel for actual data collection.

The NAC-USV (Navigation And Control)

The NAC-USV is a kayak-based vessel designed for fail-safe testing. It mirrors the electrical and control hardware of the more expensive platform but carries dummy weights instead of sensitive sensors. This allows researchers to "break things" safely while developing autonomous navigation and obstacle avoidance algorithms.

Internal hardware layout of the NAC-USV (kayak platform).

The BEP-USV (Bathymetry Evaluation and Post-processing)

The BEP-USV is built on a professional Echoboat-160 platform. It is equipped with a Norbit iWBMSe MBES for high-resolution mapping. By ensuring both vessels share identical electrical and control architectures—a concept termed the "Virtual Replica"—validated control logic can be seamlessly transferred from the low-cost prototype to the production vessel.

The BEP-USV (Echoboat-160) equipped with high-resolution multi-beam sonar.

Technical Specifications

Both vessels utilize a unified hardware and software stack:

  • Compute: A Cube Orange+ (ArduPilot) handles low-level flight control, while an NVIDIA Jetson Orin Nano serves as the companion computer for high-level ROS2 Humble processing.
  • Propulsion: Four Blue Robotics T500 thrusters in a differential configuration provide the power necessary to overcome currents up to 7 knots.
  • Navigation & Perception: A fusion of 1D sonar and 360° Lidar provides a unified obstacle distance map for the navigation stack.

Results and Field Validation

Field tests conducted in the Sacramento River and Stonegate Village Lake in California validated the dual-platform approach. Key performance metrics include:

  • Speed and Power: The BEP-USV achieved a top speed of 2.2 m/s with two thrusters, with projections indicating the four-thruster setup will meet the 3.6 m/s (7 knot) target for high-flow environments.
  • Endurance: The system demonstrated a 3-hour runtime, significantly exceeding the standard 1-hour mission requirement.
  • Operational Success: The BEP-USV successfully mapped a bridge scour hole, proving that the integrated GPS/IMU/MBES stack can produce research-grade data even in areas with potential signal interference.

Discussion and Conclusion

The dual-USV strategy effectively lowers the barrier to entry for high-stakes bathymetry research. By opting for a monohull design over a catamaran, the researchers improved maneuverability in tight spaces, such as between bridge piers. While the current system is non-holonomic (unable to move sideways), it provides a robust foundation for future work in adaptive control laws, such as Model Predictive Control or Reinforcement Learning, to better handle extreme disturbances and potential hardware failures. The open-sourcing of the CAD models, Bill of Materials, and software nodes ensures this platform remains an accessible resource for the marine robotics community.

Summary updated

Abstract

Bathymetry, the study of underwater depth and topography, relies on detailed sonar mapping of the underwater structures. These measurements, critical for infrastructure health monitoring and hazard detection, often require prohibitively expensive sensory equipment and stable measurement conditions. The high financial risk associated with sensor damage or vessel loss creates a reluctance to deploy uncrewed surface vessels (USVs) for bathymetry. However, the alternative, crewed-boat bathymetry operations, are costly, pose significant hazards to personnel, and frequently fail to achieve the highly stable conditions necessary for bathymetry data collection, especially under challenging conditions such as high currents. Consequently, further research is essential to advance autonomous control, navigation, and data processing technologies, with a particular focus on bathymetry while ensuring safety under extreme conditions. There is a notable lack of accessible hardware platforms that allow for integrated research in both bathymetry-focused autonomous control and navigation, as well as data evaluation and processing. This paper addresses this gap by detailing the design and implementation of two complementary (dual) research USV systems tailored for uncrewed bathymetry research. This includes a low-cost USV for Navigation And Control research (NAC-USV) and a second, high-end USV equipped with a high-resolution multi-beam sonar and the associated hardware for Bathymetry data quality Evaluation and Post-processing research (BEP-USV). The NAC-USV facilitates the investigation of autonomous, fail-safe navigation and control technologies, emphasizing the stability requirements for high-quality bathymetry data collection while minimizing the risk to expensive equipment, allowing for seamless transfer of validated controls to the BEP-USV. The BEP-USV, which mirrors the NAC-USV hardware, is then used for additional control validation and in-depth exploration of bathymetry data evaluation and post-processing methodologies. We detail the design and implementation of both USV systems, open source hardware and software design, and the bill of material. Furthermore, we demonstrate the system’s effectiveness in both research and bathymetric applications across a range of operational scenarios. All the information are available at: https://github.com/Soltanilara/Twin-USV/.
BibTeX
@inproceedings{kumar2025design,
  author = {Dinesh Kumar and Amin Ghorbanpour and Kin Yen and Iman Soltani},
  title = {{Design and Implementation of a Dual Uncrewed Surface Vessel Platform for Bathymetry Research Under High-Flow Conditions}},
  booktitle = {IEEE Access},
  year = {2025},
  doi = {10.1109/access.2025.3580343},
}
Figure