Design and analysis of folding mechanism for automotive seats based on space maximization

Shijun Zhang, Xiaowei Huang, Shuai Li, Kefei WangVibroengineering 2024 · DOI

TL;DR

This paper proposes a systematic design and analysis method for "stowable" automotive folding seats using a four-bar linkage mechanism. By mathematically optimizing the placement of hinge points, the researchers demonstrate how to maximize interior cargo space and ensure a flat load floor without compromising passenger comfort or mechanical reliability.

What Problem Does This Paper Address?

In modern automotive design, interior space is a premium commodity. While folding seats are a standard solution for increasing cargo capacity, designing a mechanism that allows a seat to fold completely flat—or "stow" away—is a complex engineering challenge.

Existing research often focuses on ergonomics or crash safety but frequently overlooks the specific spatial constraints of the vehicle's interior (like floor height and luggage compartment alignment) during the initial mechanism design phase. The authors aim to bridge this gap by providing a repeatable method for determining the optimal hinge positions for a third-row seat, ensuring the seat folds into the smallest possible footprint while avoiding mechanical "jamming" or interference with the vehicle floor.

Methods

The authors employ a multi-step engineering workflow:

  1. Geometric Synthesis: They define a method to locate four critical hinge points (A, B, C, and D) based on vehicle boundary conditions. This includes a "reverse design" approach—starting from the desired folded state and working backward to ensure the mechanism doesn't get stuck (avoiding collinearity of the links).
  2. Kinematic Modeling: Using the complex vector method and Euler’s formula, they establish equations to track the angular position, velocity, and acceleration of the seat components throughout the folding motion.
  3. Dynamic Analysis: They formulate force balance equations to calculate the required driving torque ($M$) and the forces acting on the hinges. This is crucial for determining how much effort a user needs to fold the seat or for sizing an electric motor.
  4. Validation: The theoretical results from MATLAB numerical simulations are compared against a 3D Digital Mock-Up (DMU) created in CATIA software to verify the motion trajectory.

Datasets

While this is not a machine learning paper using large-scale datasets, the authors validate their method using a specific Application Case based on a real-world vehicle model.

  • Input Parameters: The study uses a detailed set of "Body and seat design parameters" (Table 1), including a passenger mass of 70 kg, seat cushion mass of 9.5 kg, and specific XYZ coordinates for the H-point and luggage compartment height.
  • Benchmarks: The primary benchmark is the alignment between the numerical MATLAB model and the high-fidelity CATIA 3D motion analysis.

Key Insights and Ideas

  • The "Stowable" Advantage: The paper identifies that while "Fold back" seats are cheaper and lighter, "Stowable" seats (using four-bar linkages) offer the best balance of space efficiency and compatibility with the vehicle body.
  • The 3° Safety Margin: To prevent the mechanism from reaching a "dead point" (where links align and the mechanism jams), the authors suggest maintaining at least a 3-degree clearance from the collinearity line during the design of the moving pivots.
  • Maximizing "Sink": A key insight is that the vertical height difference between the initial and final positions of the moving pivots directly correlates to how much the seat cushion can "sink" into the floor. Maximizing this difference is the secret to a perfectly flat cargo area.

Key Results

  • High Fidelity Validation: The motion trajectory generated by the mathematical model aligned "closely" with the CATIA/DMU simulation, proving the method's reliability for industrial application.
  • Torque Profiles: The dynamic analysis successfully mapped the torque requirements throughout the folding arc. For the test case, the torque ($M$) peaks early in the folding process and then tapers off, providing a clear roadmap for engineers to select manual adjustment forces or electric motor specifications.
  • Space Optimization: The method successfully aligned the folded backrest with the luggage compartment height line, achieving the "space maximization" goal.

Limitations and Future Work

  • Rigid Body Assumption: The analysis treats the seat components as rigid bodies. In reality, seat foam and fabric compress during folding, which could introduce slight variances in the required force and final stowed volume.
  • Specific Geometry: The application case is tailored to a specific third-row seat. While the method is universal, the specific hinge coordinates provided are unique to that vehicle's floor and cargo geometry.
  • Future Directions: The authors suggest this research serves as a reference for similar vehicles, but future work could involve integrating these kinematic models into automated optimization loops to find the "perfect" hinge points even faster.

Summary updated

Abstract

To solve the problem of maximizing space utilization of car folding seats within limited spatial constraints, a design method for space-maximizing four-bar folding seat hinges is proposed. First, we will investigate the existing types of car folding seats, identify the mainstream configurations, and determine the optimal position of the four-bar linkage hinge point based on the constraints present within the car using theoretical analysis methods. Secondly, kinematic and dynamic models of the four-bar linkage mechanism are established, followed by the formulation of kinematic and dynamic equations. Finally, numerical methods are employed to solve these equations and obtain the kinematic and dynamic characteristics. The results indicate that the design method proposed in the article, which aims to maximize the space of the hinge four-bar folding seat, is efficient and feasible. This approach optimizes the utilization of interior space and enhances passenger comfort while accommodating the folding function of the seat within the existing vehicle environment. This method holds significant engineering implications for the design of folding seats in similar types of vehicles.
BibTeX
@inproceedings{zhang2024design,
  author = {Shijun Zhang and Xiaowei Huang and Shuai Li and Kefei Wang},
  title = {{Design and analysis of folding mechanism for automotive seats based on space maximization}},
  booktitle = {Vibroengineering},
  year = {2024},
  doi = {10.21595/vp.2024.24535},
}
Figure