Abstract: As next-generation wireless communication systems need to be able to operate in high-frequency bands and high-mobility scenarios, delay-Doppler (DD) domain multicarrier (DDMC) modulation schemes, such as orthogonal time frequency space (OTFS), demonstrate superior reliability over orthogonal frequency division multiplexing (OFDM). Accurate DD domain channel modeling is essential for DDMC system design. However, since traditional channel modeling approaches are mainly confined to time, frequency, and space domains, the principles of DD domain channel modeling remain poorly studied. To address this issue, we propose a systematic DD domain channel measurement and modeling methodology in high-speed railway (HSR) scenarios. First, we design a DD domain channel measurement method based on the long-term evolution for railway (LTE-R) system. Second, for DD domain channel modeling, we investigate quasi-stationary interval, statistical power modeling of multipath components, and particularly, the quasi-invariant intervals of DD domain channel fading coefficients. Third, via LTE-R measurements at 371 km/h, taking the quasi-stationary interval as the decision criterion, we establish DD domain channel models under different channel time-varying conditions in HSR scenarios. Fourth, the accuracy of proposed DD domain channel models is validated via bit error rate comparison of OTFS transmission. In addition, simulation verifies that in HSR scenario, the quasi-invariant interval of DD domain channel fading coefficient is on millisecond (ms) order of magnitude, which is much smaller than the quasi-stationary interval length on 100 ms order of magnitude. This study could provide theoretical guidance for DD domain modeling in high-mobility environments, supporting future DDMC and integrated sensing and communication designs for 6G and beyond.
The Challenge of High-Mobility 6G
As we move toward 6G, communication systems must handle extreme mobility, such as high-speed trains traveling at 350+ km/h. Traditional 4G/5G systems rely on Orthogonal Frequency Division Multiplexing (OFDM), which struggles in these scenarios because rapid movement causes significant Doppler shifts. These shifts destroy subcarrier orthogonality and create severe interference.
To solve this, researchers are turning to the Delay-Doppler (DD) domain, using modulations like Orthogonal Time Frequency Space (OTFS). However, most existing channel models are built for the Time-Frequency domain. There is a lack of precise, measurement-based models that describe how DD domain channels evolve over time. Specifically, the "quasi-invariant interval"—the tiny window of time where the channel's fading coefficients stay constant—is essential for designing efficient receivers and pilot patterns but remains poorly understood.
Measurement and Modeling Methodology
The authors developed a comprehensive methodology consisting of three main parts:
- LTE-R Based Measurement: They modified a Software Defined Radio (USRP) to act as a channel sounder, capturing live LTE-for-Railway signals from base stations along an active HSR line.
- Precise Parameter Estimation: They proposed a two-step estimation algorithm. First, a coarse estimation is done using 2D Fourier transforms on the pilot signals. Then, a "Precise DD Domain Channel Estimation" algorithm refines these values to find "off-grid" delay and Doppler shifts that standard FFTs might miss.
- Statistical Modeling: The paper classifies HSR viaduct channels into three categories—Weak, Moderate, and Strong time-varying—based on the intensity of multipath fluctuations as the train moves relative to the base station.
Real-World Data from the Beijing-Shenyang HSR
The study uses a unique, real-world dataset captured from field measurements on the Beijing-Shenyang High-Speed Railway in China. The scenario involved a viaduct environment (10–20m high) surrounded by farmland and low-rise buildings. Data was captured at a train speed of 371 km/h using an LTE-R system operating at 465 MHz with a 5 MHz bandwidth.
Insights into Channel Stability
A major finding of this research is the significant scale difference between statistical stability and coefficient stability. The quasi-stationary interval ($T_{QS}$), which describes how long the "average" environment stays the same, is roughly 100 ms. In contrast, the quasi-invariant interval ($T_{QI}$), which describes how long the specific fading coefficients stay the same, is only ~1 ms.
Key results from the study include:
- New TDDL Models: The authors provide three specific Tapped Delay-Doppler Line (TDDL) models (TDDL-A, B, and C) corresponding to strong, moderate, and weak time-varying scenarios. These include specific values for delay (ns), power (dB), and Doppler (Hz).
- Validation via BER: To prove the models work, the authors simulated OTFS transmission. The Bit Error Rate (BER) curves of the proposed models aligned closely with the BER calculated from raw measured data, validating the model's accuracy.
- Quantified Stability: For a train at 371 km/h, the minimum quasi-invariant interval was found to be as low as 0.93 ms in strong time-varying conditions, providing a concrete constraint for 6G pilot symbol spacing.
Conclusion and Future Directions
While this study provides a critical foundation for DD domain modeling, the authors acknowledge limitations that pave the way for future work. Current models focus on Delay and Doppler but do not yet account for the spatial (angular) domain, which is vital for massive MIMO systems. Additionally, the data is currently limited to viaducts; future research will need to address more complex HSR environments like tunnels and stations. Ultimately, this DD modeling framework could support Integrated Sensing and Communication (ISAC), where communication signals are also used to sense the environment like radar.
Summary updated