Degradation modelling of chaotic systems via random walks in phase space

Zhendan Lu, Cong Wang, Yawen Zhang, Yunxia ChenCommunications 2026 · DOI

Abstract: Accurately predicting long-term degradation in chaotic systems remains a fundamental challenge due to their sensitive dependence on initial conditions and non-periodic dynamics. Conventional numerical models, which rely on fine time-step integration, are computationally demanding and prone to cumulative errors. Here we present a phase-space random walk framework for degradation modeling in chaotic systems. The approach characterizes local degradation velocity distributions through short-time averaging and reconstructs the long-term evolution as stochastic transitions across phase-space regions. Validation on chaotic electronic and mechanical systems demonstrates that the method improves computational efficiency by over two orders of magnitude while maintaining prediction errors below five percent. The analysis further reveals that chaotic systems experience transitions among dynamic regimes with varying degrees of chaos during degradation. This framework provides an efficient and generalizable way to modeling complex degradation processes, offering further insights into the reliability design of electronic, mechanical, and mechatronic systems.

Introduction

Predicting the long-term "health" or degradation of chaotic systems—such as gearboxes or complex oscillator circuits—is notoriously difficult. These systems exhibit extreme sensitivity to initial conditions, commonly known as the "butterfly effect." In traditional numerical simulations, even infinitesimal errors can snowball over time, leading to wildly inaccurate long-term predictions.

Standard approaches typically rely on fine-grained time-step integration. This "brute force" method is computationally prohibitive; simulating years of wear on a chaotic machine might require trillions of calculation steps. This bottleneck is particularly problematic during the design phase, where engineers must iterate quickly to ensure reliability. Furthermore, existing data-driven models often struggle because high-quality degradation data for novel chaotic designs is frequently unavailable.

Methodology: A Three-Step Framework

To bridge the gap between computational efficiency and chaotic complexity, a novel three-step framework has been developed to model degradation as a stochastic process in phase space:

  1. Universal Network Model (UNM): Physical systems, whether mechanical or electronic, are first abstracted into a unified network of "nodes" and "edges." This allows heterogeneous systems, like a gearbox and a chaotic circuit, to be analyzed using the same mathematical language.
  2. Degradation Phase Space (DPS) Construction: Instead of simulating a single, continuous long-term trajectory, the framework performs numerous "short-time" numerical solutions at various discrete degradation states. By averaging these short bursts, a local degradation velocity is calculated, creating a map of how the system ages at any given point in its lifecycle.
  3. Phase-Space Random Walk: The long-term degradation process is treated as a stochastic transition across this velocity map. The framework uses barycentric coordinate interpolation to estimate velocities between known points and conducts a random walk to build a "trajectory bundle" representing the most probable path of failure.
The proposed framework: from system abstraction to DPS construction and random walk simulation.

Experimental Validation and Results

The framework was validated using high-fidelity simulations of two classic chaotic systems: the Lars Circuit (a dual-transistor chaotic oscillator) and a Two-Shaft Gearbox (a mechanical system subject to fatigue and spalling).

The phase-space random walk method demonstrated remarkable performance across both test cases:

  • Efficiency: The proposed method solved a trajectory bundle in just 17.5 minutes, whereas the traditional time-domain iterative method required 35 hours for a single trajectory—a 120x speedup.
  • Accuracy: Despite the massive reduction in computation time, prediction errors for both electronic and mechanical systems remained below 5% when compared to ground-truth simulations.
Comparison of the proposed method (trajectory bundles) against traditional time-domain simulations, showing high alignment and accuracy.

Discussion: Regime Transitions and Memory

Beyond performance metrics, the research provided new insights into chaotic degradation. It revealed that systems do not simply degrade linearly; they transition between different "dynamic regimes" of chaos. A "deflection" effect was observed: when a degradation trajectory moves from a low-chaos to a high-chaos region, the trajectory bundle deflects and its divergence increases sharply, making failure significantly harder to predict. Interestingly, the process appears to retain a form of "memory," as degradation patterns tend to align with previous boundaries when transitioning back to lower-chaos states.

Conclusion

By exploiting the statistical predictability of long-term averages in disordered states, this phase-space random walk framework offers a powerful and efficient tool for modeling complex degradation. Its ability to handle heterogeneous systems through the Universal Network Model makes it widely applicable across electronic, mechanical, and mechatronic engineering. Future work will focus on integrating external random loads and exploring applications in other complex systems, such as biological population dynamics.

Summary updated

Abstract

Accurately predicting long-term degradation in chaotic systems remains a fundamental challenge due to their sensitive dependence on initial conditions and non-periodic dynamics. Conventional numerical models, which rely on fine time-step integration, are computationally demanding and prone to cumulative errors. Here we present a phase-space random walk framework for degradation modeling in chaotic systems. The approach characterizes local degradation velocity distributions through short-time averaging and reconstructs the long-term evolution as stochastic transitions across phase-space regions. Validation on chaotic electronic and mechanical systems demonstrates that the method improves computational efficiency by over two orders of magnitude while maintaining prediction errors below five percent. The analysis further reveals that chaotic systems experience transitions among dynamic regimes with varying degrees of chaos during degradation. This framework provides an efficient and generalizable way to modeling complex degradation processes, offering a other insights into the reliability design of electronic, mechanical, and mechatronic systems.
BibTeX
@inproceedings{lu2026degradation,
  author = {Zhendan Lu and Cong Wang and Yawen Zhang and Yunxia Chen},
  title = {{Degradation modelling of chaotic systems via random walks in phase space}},
  booktitle = {Communications},
  year = {2026},
  doi = {10.1038/s44172-026-00587-7},
}
Figure