Decision Transformers for RIS-Assisted Systems With Diffusion Model-Based Channel Acquisition

Jie Zhang, Yiyang Ni, Jun Li, Guangji Chen, Zhe Wang, Long Shi, Shi Jin, Wen Chen, H. Vincent Poor

TL;DR

This paper introduces a novel framework, DEDT, that combines Diffusion Models (DM) and Decision Transformers (DT) to efficiently acquire channel state information (CSI) and optimize RIS beamforming in dynamic wireless environments. By leveraging spatial correlations for CSI estimation and DTs for adaptive decision-making, DEDT significantly improves communication performance and reduces training overhead compared to existing methods.

What Problem Does This Paper Address?

Reconfigurable Intelligent Surfaces (RISs) hold immense promise for enhancing wireless communication by intelligently reshaping the radio environment. However, their effectiveness hinges on accurate channel state information (CSI) and efficient beamforming strategies. Obtaining CSI in RIS-assisted systems is challenging due to the large number of RIS elements and the passive nature of RIS, which prevents direct sensing. Furthermore, dynamic environments require constant adaptation of beamforming policies, which is computationally expensive for traditional reinforcement learning (RL) methods that often necessitate retraining from scratch. This paper tackles the dual challenge of efficient CSI acquisition and adaptive beamforming in dynamic RIS-assisted systems.

Methods

The proposed Diffusion-Enhanced Decision Transformer (DEDT) framework integrates two key components:

  1. Diffusion Model (DM) for CSI Acquisition: The DM is used to efficiently acquire full CSI (FCSI) from partial CSI (PCSI). It leverages the spatial correlations inherent in wireless channels. The process involves a forward diffusion phase where noise is gradually added to the channel data, and a reverse denoising phase where a neural network learns to remove the noise and reconstruct the original CSI. This approach significantly reduces the pilot overhead required for CSI estimation.
  2. Decision Transformer (DT) for Beamforming Optimization: The DT frames the beamforming problem as a sequence modeling task. It learns from historical data (trajectories of states, actions, and rewards) to predict optimal beamforming actions without requiring extensive retraining. This allows for rapid adaptation to new environments. The DT is pre-trained on diverse scenarios and can be fine-tuned for specific new environments.

The DEDT framework combines these by using the DM to generate accurate CSI, which then serves as the state input for the DT to make informed beamforming decisions.

Datasets

Not explicitly discussed in the paper. The authors mention collecting "offline sequence data from various scenarios (Env 1,..., Env L)" for pre-training the DT. This data includes "user-received rates, CSI, and near-optimal RIS beamforming strategies."

Key Insights and Ideas

  • Synergy of DM and DT: The paper highlights the powerful combination of diffusion models for generative tasks (like CSI acquisition) and transformers for sequential decision-making. This hybrid approach addresses both the data generation and decision-making challenges in RIS systems.
  • Leveraging Spatial Correlations: The DM's ability to infer full CSI from partial CSI by exploiting spatial correlations is a crucial innovation, significantly reducing the burden of pilot overhead.
  • Adaptive Beamforming without Retraining: The Decision Transformer's ability to learn from historical trajectories and adapt to new scenarios without full retraining is a major advantage over traditional RL methods, enabling faster and more efficient system operation.
  • Balancing CSI Sparsity and Spectral Efficiency: The DEDT exhibits an optimal "mask ratio" (proportion of unestimated RIS elements) where effective data rate peaks, demonstrating a smart trade-off between estimation cost and system performance.

Key Results

  • Improved Effective Data Rate: DEDT consistently outperforms the baseline RCDT algorithm in terms of effective data rate across various SNR levels and RIS element configurations. For instance, in Figure 7, DEDT shows higher data rates than RCDT.
  • Faster Convergence: DEDT converges significantly faster than RL-based methods (e.g., PPO, DDPG), achieving convergence in approximately 300 epochs compared to over 900 epochs for RL methods, representing a speedup of over 3 times (Figures 8-10).
  • Near-Optimal Performance: DEDT closely approaches the performance achieved with perfect channel information (PCDT), indicating high-quality channel generation and effective beamforming.
  • Reduced NMSE: Figure 5 shows that the proposed DEDT model achieves lower Normalized Mean-Square Error (NMSE) compared to a random channel (RC) approach, especially at higher SNRs.
  • Robustness to Mask Ratio: Figure 6 demonstrates that DEDT maintains good performance even with a significant portion of RIS elements unestimated (higher mask ratio), showcasing its ability to infer CSI effectively.

Limitations and Future Work

  • Limitations:
    • The paper acknowledges that the performance of DEDT can slightly decrease beyond its optimal mask ratio, indicating a trade-off between channel estimation cost and system performance.
  • While the paper focuses on a specific RIS construction method for simplifying spatial correlation derivation, it notes that the methodology is broadly applicable to various scenarios.
  • Future Work:
    • The paper's framework is designed for dynamic environments and suggests that further research could explore its application in more complex and unpredictable scenarios.
  • The authors implicitly suggest that further optimization of the DM and DT components, or their integration with other AI techniques, could lead to even greater performance gains.

Summary updated

Abstract

Reconfigurable intelligent surfaces (RISs) have been recognized as a revolutionary technology for future wireless networks. However, RIS-assisted communications have to continuously tune phase-shifts relying on accurate channel state information (CSI) that is generally difficult to obtain due to the large number of RIS channels. The joint design of CSI acquisition and subsection RIS phase-shifts remains a significant challenge in dynamic environments. In this paper, we propose a diffusion-enhanced decision Transformer (DEDT) framework consisting of a diffusion model (DM) designed for efficient CSI acquisition and a decision Transformer (DT) utilized for phase-shift optimizations. Specifically, we first propose a novel DM mechanism, i.e., conditional imputation based on denoising diffusion probabilistic model, for rapidly acquiring real-time full CSI by exploiting the spatial correlations inherent in wireless channels. Then, we optimize beamforming schemes based on the DT architecture, which pre-trains on historical environments to establish a robust policy model. Next, we incorporate a fine-tuning mechanism to ensure rapid beamforming adaptation to new environments, eliminating the retraining process that is imperative in conventional reinforcement learning (RL) methods. Simulation results demonstrate that DEDT can enhance efficiency and adaptability of RIS-aided communications with fluctuating channel conditions compared to state-of-the-art RL methods.
BibTeX
@article{zhang2026decision,
  author = {Jie Zhang and Yiyang Ni and Jun Li and Guangji Chen and Zhe Wang and Long Shi and Shi Jin and Wen Chen and H. Vincent Poor},
  title = {{Decision Transformers for RIS-Assisted Systems With Diffusion Model-Based Channel Acquisition}},
  journal = {IEEE Trans. Wireless Communications},
  year = {2026},
  doi = {10.1109/twc.2026.3692586},
}

Loading related content...

Figure