Current trends and future directions in event-based control

Michael Hertneck, David Meister, Frank Allgöwer

Abstract

The defining characteristic of event-based control is that feedback loops are only closed when indicated by a triggering condition that takes recent information about the system into account. This stands in contrast to periodic control where the feedback loop is closed periodically. Benefits of event-based control arise when sampling comes at a cost, which occurs, e.g., for Networked Control Systems or in other setups with resource constraints. A rapidly growing number of publications deals with event-based control. Nevertheless, some fundamental questions about event-based control are still unsolved. In this article, we provide an overview of current research trends in event-based control. We focus on results that aim for a better understanding of effects that occur in feedback loops with event-based control. Based on this summary, we identify important open directions for future research.

Introduction: Beyond Periodic Sampling

Traditional control systems predominantly rely on Time-Triggered Control (TTC), where sensors sample and transmit data at fixed, periodic intervals. While TTC is mathematically straightforward, it is often inefficient for Networked Control Systems (NCS) or battery-powered devices. In these scenarios, transmitting data when the system is stable wastes valuable bandwidth and energy.

Event-based control (EBC) addresses this inefficiency by closing the feedback loop only when a specific "triggering condition" is met—for instance, when the system state deviates beyond a predefined threshold. The field is broadly categorized into Event-Triggered Control (ETC), which continuously monitors the system state to react immediately to disturbances, and Self-Triggered Control (STC), which proactively calculates the next sampling time based on current data.

Architecture of an Event-Triggered Control (ETC) system, where the triggering mechanism decides when to update the control signal based on the plant state.

Despite the proliferation of EBC research, the landscape remains fragmented with numerous isolated triggering rules. This review synthesizes current theoretical trends, focusing on unifying analysis frameworks and the unique sampling behaviors inherent to EBC.

Theoretical Frameworks for Analysis

To move beyond custom proofs for individual rules, researchers are adopting unifying analysis frameworks to provide more robust guarantees:

  • Hybrid Systems Formalism: Models EBC systems as hybrid systems with continuous "flows" (dynamics between samples) and discrete "jumps" (sampling instants).
  • Hybrid Small-Gain Theorems: Analyzes the closed-loop system as an interconnection of two subsystems: the plant/controller dynamics and the sampling-induced error.
  • $L_p$ Norm Frameworks: Employs classical small-gain arguments based on $L_p$ norms to guarantee stability across various triggering rules.
  • Finite State Abstractions: Uses numerical methods to divide the state space into regions, mapping transitions to predict inter-event times and analyze sampling behavior.

Core Concepts and System Behavior

A key insight in EBC is the "greedy" nature of many algorithms. ETC typically attempts to maximize the time until the next sample. However, research suggests that triggering a sample slightly earlier than strictly required can sometimes lead to longer average inter-event times over the long term.

System state trajectory under threshold-based ETC. Events (vertical dashed lines) are triggered when the state reaches the red dashed thresholds.

Furthermore, EBC reveals that "timing is information." In rate-limited channels, the exact moment a trigger occurs carries implicit information about the system state. Because a packet was sent at a specific time, the receiver can infer the state's magnitude, potentially allowing stabilization with fewer transmitted bits than TTC.

Benchmark Results

The literature has established several benchmark theoretical results that quantify the advantages of EBC:

  • Performance Advantage: For 1D stochastic systems, an optimal absolute threshold ETC scheme provides a 1/3 cost reduction compared to the best periodic controller at the same average sampling rate.
  • Zero-Bit Stabilization: In ideal channels without unknown delays, ETC can theoretically stabilize a linear system with an Information Transmission Rate (ITR) of zero after initialization, as trigger timing conveys all necessary state information.
  • Impact of Delays: The introduction of unknown communication delays reduces the data-rate advantage of ETC. Significant delays can cause ETC to lose its transmission rate superiority over TTC entirely.

Challenges and Future Directions

While promising, EBC faces several limitations. Current analytical tools for predicting exact sampling behavior are largely restricted to simple scalar or planar systems. Numerical approaches like finite state abstractions struggle with the "curse of dimensionality" in high-dimensional systems. Additionally, many EBC designs assume centralized information, and their performance often degrades in decentralized setups.

Future research is expected to focus on developing broader frameworks based on dissipativity theory or robust control (e.g., Integral Quadratic Constraints) to evaluate EBC schemes. There is also a pressing need for standardized benchmarks to fairly compare performance-to-sampling-rate trade-offs. Finally, applying EBC to emerging technologies like event-based vision (neuromorphic cameras) and data-driven predictive maintenance remains a fertile area for exploration.

Summary updated

Abstract

The defining characteristic of event-based control is that feedback loops are only closed when indicated by a triggering condition that takes recent information about the system into account. This stands in contrast to periodic control where the feedback loop is closed periodically. Benefits of event-based control arise when sampling comes at a cost, which occurs, e.g., for Networked Control Systems or in other setups with resource constraints. A rapidly growing number of publications deals with event-based control. Nevertheless, some fundamental questions about event-based control are still unsolved. In this article, we provide an overview of current research trends in event-based control. We focus on results that aim for a better understanding of effects that occur in feedback loops with event-based control. Based on this summary, we identify important open directions for future research.
BibTeX
@article{hertneck2026current,
  author = {Michael Hertneck and David Meister and Frank Allgöwer},
  title = {{Current trends and future directions in event-based control}},
  journal = {Eur. J. Control},
  year = {2026},
  doi = {10.1016/j.ejcon.2025.101387},
}
Figure