Cramér-Rao Bound Minimization for IRS-Enabled Multiuser Integrated Sensing and Communications

Xianxin Song, Xiaoqi Qin, Jie Xu, Rui Zhang

TL;DR

This paper tackles the challenge of simultaneously performing sensing and communication in wireless networks using Intelligent Reflecting Surfaces (IRS). The authors propose a joint optimization framework for transmit and reflective beamforming to minimize the fundamental limits of target estimation (Cramér-Rao Bound) while satisfying communication quality requirements, demonstrating significant performance gains over existing methods.

What Problem Does This Paper Address?

Future wireless networks, like 6G, aim to integrate sensing capabilities alongside communication. This is known as Integrated Sensing and Communications (ISAC). A major hurdle is the often poor signal propagation, especially in non-line-of-sight (NLoS) scenarios, which degrades both sensing accuracy and communication reliability. Intelligent Reflecting Surfaces (IRS), which can intelligently steer radio waves, offer a promising solution by reconfiguring the wireless environment. However, effectively leveraging IRS for ISAC, especially when dealing with multiple users and targets in NLoS, presents complex optimization challenges. This paper specifically addresses how to jointly optimize the base station's (BS) transmission and the IRS's reflection to achieve the best possible target sensing performance (quantified by the Cramér-Rao Bound) while ensuring reliable communication for multiple users, even when the target is not directly visible to the BS.

Methods

The core of the paper lies in formulating and solving complex optimization problems. The authors propose a joint optimization of:

  • Transmit beamforming at the BS: This determines how the BS directs its signals for both communication and sensing.
  • Reflective beamforming at the IRS: This controls how the IRS reflects signals to assist communication and sensing.

To tackle the non-convexity and coupling inherent in these problems, they employ a suite of advanced optimization techniques:

  • Alternating Optimization: This breaks down the complex problem into smaller, manageable subproblems that are solved iteratively.
  • Semi-Definite Relaxation (SDR): This technique relaxes non-convex constraints (like rank-one constraints for beamforming vectors) into convex ones, allowing for efficient solutions.
  • Successive Convex Approximation (SCA): This method is used to handle remaining non-convexities by approximating them with convex functions iteratively.

The paper also considers two types of targets (extended and point) and two types of user receivers (Type-I: cannot cancel sensing interference, Type-II: can cancel sensing interference), leading to four distinct problem formulations.

Datasets

Not discussed in the paper. The evaluation is based on simulated scenarios with defined channel models and parameters.

Key Insights and Ideas

  • IRS as a Game Changer for NLoS Sensing: The paper strongly demonstrates that IRS can create virtual line-of-sight paths, enabling effective sensing of targets that are otherwise hidden from the base station.
  • Joint Optimization is Crucial: Separating communication and sensing designs or only optimizing transmit beamforming leads to suboptimal sensing performance. Jointly optimizing both transmit and reflective beamforming is key to minimizing the fundamental estimation limits (CRB).
  • Type-II Receivers Offer Significant Gains with Multiple Users: While Type-I and Type-II receivers perform similarly when there's only one user, Type-II receivers (capable of canceling sensing interference) provide substantial performance improvements when multiple users are present. This highlights the importance of managing interference in multi-user ISAC systems.
  • Dedicated Sensing Signals are Necessary (Sometimes): For Type-II receivers, especially with multiple users, dedicated sensing signals are shown to be crucial for achieving good sensing performance and ensuring the CRB remains bounded.
  • CRB as a Fundamental Performance Metric: Using the Cramér-Rao Bound provides a rigorous way to assess the theoretical limits of sensing performance, guiding the optimization towards the best possible outcomes.

Key Results

  • The proposed joint transmit and reflective beamforming design significantly outperforms benchmark schemes (e.g., transmit beamforming only, separate communication and sensing designs) in terms of reducing the estimation CRB for both extended and point targets.
  • For extended targets, the proposed design achieves lower CRB across various SINR thresholds, with performance gains becoming more pronounced as the number of users increases.
  • For point targets, similar performance improvements are observed, with Type-II receivers showing a clear advantage over Type-I when there are multiple users.
  • The paper presents efficient algorithms that converge to optimal or near-optimal solutions for the complex, non-convex optimization problems.

Limitations and Future Work

  • Channel State Information (CSI) Assumption: The paper assumes perfect CSI is available at the BS. In real-world scenarios, CSI acquisition is a challenging task and can introduce performance degradation. Future work could explore robust designs that account for imperfect CSI.
  • Computational Complexity: While efficient algorithms are presented, the optimization problems can still be computationally intensive, especially for a large number of antennas, IRS elements, or users.
  • Single Target Assumption: The current work focuses on a single target. Extending the framework to multi-target scenarios would be a valuable next step.
  • Hardware Imperfections: The analysis assumes ideal IRS elements and BS components. Investigating the impact of hardware impairments (e.g., phase errors, non-linearities) would add practical relevance.
  • Dynamic Environments: The current model assumes static or slowly changing environments. Adapting the algorithms for dynamic scenarios with moving targets or users would be an important extension.

Summary updated

Abstract

This paper investigates an intelligent reflecting surface (IRS) enabled multiuser integrated sensing and communications (ISAC) system, which consists of one multi-antenna base station (BS), one IRS, multiple single-antenna communication users (CUs), and one target at the non-line-of-sight (NLoS) region of the BS. The IRS is deployed to not only assist the communication from the BS to the CUs, but also enable the BS's NLoS target sensing based on the echo signals from the BS-IRS-target-IRS-BS link. We consider two types of targets, namely the extended and point targets, for which the BS aims to estimate the complete target response matrix and the target direction-of-arrival (DoA) with respect to the IRS, respectively. To provide full degrees of freedom for sensing, we consider that the BS sends dedicated sensing signals in addition to the communication signals. Accordingly, we model two types of CU receivers, namely Type-I and Type-II CU receivers, which do not have and have the capability of canceling the interference from the sensing signals, respectively. Under each setup, we jointly optimize the transmit beamforming at the BS and the reflective beamforming at the IRS to minimize the Cram\'er-Rao bound (CRB) for target estimation, subject to the minimum signal-to-interference-plus-noise ratio (SINR) constraints at the CUs and the maximum transmit power constraint at the BS. We present efficient algorithms to solve the highly non-convex SINR-constrained CRB minimization problems, by using the techniques of alternating optimization, semi-definite relaxation, and successive convex approximation. Numerical results show that the proposed design achieves lower estimation CRB than other benchmark schemes, and the sensing signal interference cancellation at Type-II CU receivers is beneficial when the number of CUs is greater than one.
BibTeX
@article{song2024cramer,
  author = {Xianxin Song and Xiaoqi Qin and Jie Xu and Rui Zhang},
  title = {{Cramér-Rao Bound Minimization for IRS-Enabled Multiuser Integrated Sensing and Communications}},
  journal = {IEEE Trans. Wireless Communications},
  year = {2024},
  doi = {10.1109/twc.2024.3364913},
}
Figure