Abstract
Diaphragm fatigue fracture is a primary failure mode in hydrogen refueling station compressors, necessitating a systematic investigation into mechanical properties under service conditions. This study establishes a refined numerical simulation model of the cover plate-diaphragm-support plate assembly to analyze stress distribution and the impact of diaphragm thickness. Results indicate that high-stress zones are concentrated in cavity transition areas and passage overlaps. Temperature significantly amplifies stress; at 300°C, maximum von Mises stress reaches 1286 MPa. Optimization identifies a thickness range of 0.3–0.5 mm as ideal for maintaining low stress levels while balancing fatigue life and deflection performance.
Introduction
In the rapidly expanding infrastructure for hydrogen-powered vehicles, diaphragm compressors play a critical role in achieving the high pressures required for refueling. The diaphragm—a thin metal membrane at the core of the compressor—is the component most prone to premature fatigue failure and cracking. Predicting these failures is notoriously difficult because the diaphragm operates in a complex "sandwich" state, contacting plates with intricate gas and oil passages. Furthermore, the heat generated during high-pressure compression introduces significant thermal stress. This research seeks to accurately model these combined loads to provide a scientific basis for structural optimization.
Methodology
The study employed a multi-step engineering approach combining experimental characterization with high-fidelity numerical modeling.
Experimental Characterization
Static mechanical tests were performed on the materials used in the diaphragm assembly: Inconel 718 for the outer layers and Brass for the middle layer. These tests provided precise constitutive parameters, such as Young’s modulus and yield strength, ensuring the accuracy of subsequent simulations.
Numerical Simulation
Using Abaqus, a refined 3D model was constructed representing the gas cavity cover plate, the three-layer diaphragm group, and the oil cavity support plate. To manage computational complexity, a sequential coupling method was used:
- Thermal Analysis: Transient heat transfer equations were solved to determine the temperature field within the cavity.
- Structural Analysis: The resulting temperature data were imported as initial strains for the structural mechanics analysis.
- Fatigue Life Estimation: Stress results were processed through
fe-safesoftware using the Goodman correction algorithm to predict the number of cycles until failure.
The researchers evaluated 17 different diaphragm thickness configurations, ranging from 0.3 mm to 1.2 mm, to identify performance trends and optimal design parameters.
Results and Discussion
Stress Concentration and Thermal Impact
The analysis revealed that high-stress areas are primarily localized in the "cavity transition zones" and regions where the diaphragm overlaps with gas or oil passages. This explains why fatigue cracks often manifest in specific circular or elliptical patterns.
Temperature acts as a massive stress multiplier. Under standard operating conditions, the maximum von Mises stress was approximately 405 MPa. However, as the cavity heats up to 300°C, the stress increases nonlinearly to 1286 MPa, nearly reaching the material's yield strength. This highlights the critical importance of thermal management in compressor design.
Optimization of Diaphragm Thickness
The study identified a counterintuitive relationship between thickness and durability. While thinning a diaphragm generally reduces stress and extends fatigue life, excessively thin membranes lack necessary elasticity and present manufacturing challenges. Conversely, diaphragms thicker than 0.5 mm exhibit a sharp increase in stress because they lose the flexibility required to conform to the cavity shape.
Key findings include:
- Fatigue Life: A 0.3 mm diaphragm demonstrated a fatigue life of $10^{7.70}$ cycles, whereas a 0.6 mm diaphragm dropped significantly to $10^{5.79}$ cycles.
- Optimal Range: A thickness between 0.3 mm and 0.5 mm keeps the diaphragm within a "low stress service level."
Conclusion
To balance fatigue life with deflection performance, the researchers recommend selecting the thickest possible value within the optimal range, specifically 0.5 mm. While structural optimization significantly improves component longevity, the extreme temperatures of hydrogen compression remain a primary threat. Future engineering efforts should focus on optimizing hydrogen cooling channels and developing high-temperature early warning systems to prevent operation under extreme thermal conditions.
This paper was received on 02/03/2025 and published on 14/07/2025.
Summary updated