Control Aspects for Using RIS in Latency-Constrained Mobile Edge Computing

Fabio Saggese, Victor Croisfelt, Francesca Costanzo, Junya Shiraishi, Radosław Kotaba, Paolo Di Lorenzo, Petar PopovskiACSSC 2023

Abstract

While Reconfigurable Intelligent Surfaces (RIS) are hailed as a game-changer for 6G connectivity, they come with a significant "control tax." This paper moves beyond idealized models to quantify how the overhead of channel estimation and signaling can degrade performance in latency-sensitive Mobile Edge Computing (MEC). By establishing a comprehensive framework that accounts for realistic control operations, the authors reveal a critical trade-off between control accuracy and data throughput.

Introduction

Mobile Edge Computing (MEC) allows resource-constrained devices to offload heavy computations to nearby servers. RIS technology enhances this by "steering" wireless signals to improve connection quality. However, most existing research assumes perfect channel knowledge and instantaneous signaling. In reality, managing an RIS-aided system requires significant control operations: estimating complex channels, calculating optimal resource allocations, and synchronizing devices. These operations consume time and energy, creating an "overhead vs. reliability" dilemma where excessive control time leaves insufficient room for data payloads.

System Architecture and Protocol

The authors model a dynamic environment where data arrives randomly and channels fluctuate. The system consists of an Access Point (AP) connected to an Edge Server (ES), a RIS panel, and multiple User Equipments (UEs).

System model of an RIS-aided MEC network showing the interaction between the AP, RIS, ES, and UEs.

To manage this complexity, the authors propose a Four-Phase Protocol that divides each time slot into distinct functional blocks:

  1. Initialization ($Sig_1$): Exchange of queue status and synchronization signals.
  2. Algorithmic Phase: Execution of Channel Estimation (CE) and Resource Allocation (RA).
  3. Setup ($Sig_2$): Distribution of optimized parameters to the RIS and users.
  4. Payload: The actual offloading of data from UEs to the AP/ES.
Timing diagram illustrating the four-phase protocol and the associated signaling overheads.

Methodology

The study employs Lyapunov Stochastic Optimization to minimize total energy consumption while maintaining average latency below a target threshold. Unlike standard models, this framework explicitly accounts for "control packet loss" and noisy channel estimation. Simulations were conducted for a scenario with an 8-antenna AP, a 64-element RIS, and 4 single-antenna UEs in an urban micro-cell environment. The authors have made their simulation code publicly available on GitHub to support reproducibility.

Key Insights and Results

A primary finding is that Channel Estimation (CE) is the dominant bottleneck, accounting for approximately 92% of the total control time in simulations (~46ms out of 50ms). This highlights the urgent need for faster CE algorithms in 6G.

The research also identifies a "Goldilocks" slot duration. If the slot is too short (e.g., 60ms), overhead consumes the majority of the time. If too long (e.g., 300ms), the system fails to react to data bursts, violating latency constraints. An optimal duration of ~100ms was found for the simulated setup. Furthermore, the impact of errors is asymmetric: losing user power instructions (SET-U) is significantly more damaging than sub-optimal RIS configurations (SET-R).

Conclusion

Ignoring control overhead leads to overly optimistic performance predictions. This paper quantifies the energy-latency trade-offs inherent in RIS-aided MEC, emphasizing that as data rates increase, the "fixed cost" of control remains a significant factor. Future research should focus on reducing computational complexity through machine learning and developing robust resource allocation strategies to mitigate control signaling failures.

Summary updated

Abstract

This paper investigates the role and the impact of control operations for dynamic mobile edge computing (MEC) empowered by Reconfigurable Intelligent Surfaces (RISs), in which multiple devices offload their computation tasks to an access point (AP) equipped with an edge server (ES), with the help of the RIS. While usually ignored, the control aspects related to channel estimation (CE), resource allocation (RA), and control signaling play a fundamental role in the user-perceived delay and energy consumption. In general, the higher the resources involved in the control operations, the higher their reliability; however, this introduces an overhead, which reduces the number of resources available for computation offloading, possibly increasing the overall latency experienced. Conversely, a lower control overhead translates to more resources available for computation offloading but impacts the CE accuracy and RA flexibility. This paper establishes a basic framework for integrating the impact of control operations in the performance evaluation of the RIS-aided MEC paradigm, clarifying their trade-offs through theoretical analysis and numerical simulations.
BibTeX
@inproceedings{saggese2023control,
  author = {Fabio Saggese and Victor Croisfelt and Francesca Costanzo and Junya Shiraishi and Radosław Kotaba and Paolo Di Lorenzo and Petar Popovski},
  title = {{Control Aspects for Using RIS in Latency-Constrained Mobile Edge Computing}},
  booktitle = {ACSSC},
  year = {2023},
}
Figure