Construction of a two-dimensional thermal neutron detector

Xiaohu Wang, Yuanbo Chen, Huan-yi Sheng, Yubin Zhao, Hongyu Zhang, Qiming Zhu, Rong-guang Liu, Jian Zhang, Pin XuProceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 2009 · DOI

Abstract

China Spallation Neutron Source (CSNS) was under construction since 2008. A two-dimensional thermal neutron detector with sensitive area of 200mm×200mm was constructed for the Reflect Spectrometer of CSNS. The detector was based on two-dimensional cathode strip readout MWPC, using 5.5atm<sup>3</sup>He+2.5atmC<sub>3</sub>H<sub>8</sub> mixture as working gas, and the thickness of the gas volume was 16mm. A readout electronics system was also developed for the detector, which mainly consists of charge-sensitive preamplifiers, amplifiers, charge measurement modules and a 6U VME64x crate. The design maximum neutron count rate of the detector was 10<sup>5</sup> events per second and the calculated neutron detection efficiency was about 70% for A2 neutrons. A prototype of the detector had been constructed at first, which own an energy resolution (FWHM) of about 23% for <sup>55</sup>Fe 5.9keV X-ray, and its spatial resolution (FWHM) along the anode wire direction was about 300&mu;m in X-ray test. The detector was then tested by an Am-Be neutron source. The pulse height spectrum of the neutron signal was studied. The detector can work normally and has a good performance in neutron-gamma ray discrimination.
BibTeX
@inproceedings{wang2009construction,
  author = {Xiaohu Wang and Yuanbo Chen and Huan-yi Sheng and Yubin Zhao and Hongyu Zhang and Qiming Zhu and Rong-guang Liu and Jian Zhang and Pin Xu},
  title = {{Construction of a two-dimensional thermal neutron detector}},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year = {2009},
  doi = {10.1117/12.835070},
}

Loading related content...

Figure