Conditional Normalizing Flow Surrogate for Monte Carlo Prediction of Radiative Properties in Nanoparticle-Embedded Layers

Fahime Seyedheydari, Kevin Conley, Simo SärkkäarXiv 2025 · DOI · arXiv

Abstract

This paper presents a probabilistic surrogate model based on Conditional Normalizing Flows (CNFs) for the rapid prediction of radiative properties in nanoparticle-embedded layers. Traditional Monte Carlo (MC) simulations, while accurate, are computationally prohibitive for iterative design and inverse problems. The proposed CNF model, utilizing a RealNVP framework, provides high-fidelity spectral predictions of reflectance, absorbance, and transmittance while simultaneously offering principled uncertainty quantification through 95% confidence intervals. Results demonstrate excellent agreement with ground-truth MC simulations across a broad spectral range (0.2 to 2.5 μm), significantly reducing computational overhead.

Introduction

The interaction of light with nanoparticle-embedded materials is fundamental to applications in solar energy, thermal management, and biomedical imaging. Predicting these interactions typically relies on Monte Carlo (MC) simulations, which track millions of photon trajectories to resolve radiative transfer. However, the high computational cost of MC simulations limits their utility in high-throughput design optimization and real-time inverse modeling. While deterministic neural networks offer speed, they lack the ability to quantify prediction uncertainty—a critical requirement for robust engineering. This work introduces a Conditional Normalizing Flow (CNF) surrogate that addresses these limitations by providing both fast inference and a full posterior distribution of the optical outputs.

Methods

The researchers developed a surrogate model using Conditional Normalizing Flows (CNFs). Unlike standard regression models that provide point estimates, CNFs learn to map a simple base distribution (e.g., a standard Gaussian) to a complex target distribution through a sequence of invertible, differentiable transformations.

By conditioning these transformations on physical parameters—wavelength ($\lambda$), absorption ($\mu_a$), scattering ($\mu_s$), anisotropy ($g$), and particle size distribution ($\rho$)—the model captures the full posterior distribution $p(\text{optical output} \mid \text{physical inputs})$. The architecture employs a RealNVP (Real-valued Non-Volume Preserving) framework where a fully connected neural network (FCNN) serves as a conditioner to predict the shift and scale parameters required for the flow transformations.

Datasets

Training data was generated using the MCML (Monte Carlo for Multi-Layered Media) algorithm integrated with Mie theory to calculate the optical properties of individual nanoparticles. The resulting dataset covers a broad spectral range from 0.2 to 2.5 μm. The target outputs include full spectral profiles for total reflectance, absorbance, and transmittance. The model's performance was validated using 5-fold cross-validation to ensure robust generalization to unseen physical configurations.

Results and Discussion

The CNF surrogate demonstrates high accuracy and reliable uncertainty calibration. As shown in Figure 1, the mean spectral predictions for total reflectance, absorbance, and transmittance align almost perfectly with the ground-truth MC simulations. Notably, the model effectively captures sharp spectral transitions, such as the one occurring around 1.1 μm, suggesting it is expressive enough to handle the non-linearities inherent in radiative transfer.

Comparison between the CNF model's mean predictions and the true Monte Carlo simulation outputs.

Beyond point estimates, the model provides a 95% confidence interval (CI) for its predictions. Figure 2 illustrates these posterior distributions, where the true values consistently fall within the shaded CI regions. This capability allows researchers to identify spectral regions where the model (or the underlying physics) is less certain. However, the authors note a physical discrepancy: because the model is purely probabilistic, its confidence intervals can occasionally extend into negative values, which is physically impossible for reflectance and absorbance.

Posterior predictions for reflectance, absorbance, and transmittance, showing the 95% confidence intervals (shaded blue).

Conclusion

The CNF-based surrogate provides a powerful alternative to traditional MC simulations, offering both high-speed inference and principled uncertainty quantification. Once trained, the model can generate thousands of spectral predictions in a fraction of the time required for a single MC simulation. Future work will focus on embedding physical constraints, such as non-negativity and energy conservation (reflectance + absorbance + transmittance = 1), directly into the network architecture to improve physical consistency and extending the framework to more complex multi-layer systems.

Summary updated

Abstract

We present a probabilistic, data-driven surrogate model for predicting the radiative properties of nanoparticle embedded scattering media. The model uses conditional normalizing flows, which learn the conditional distribution of optical outputs, including reflectance, absorbance, and transmittance, given input parameters such as the absorption coefficient, scattering coefficient, anisotropy factor, and particle size distribution. We generate training data using Monte Carlo radiative transfer simulations, with optical properties derived from Mie theory. Unlike conventional neural networks, the conditional normalizing flow model yields full posterior predictive distributions, enabling both accurate forecasts and principled uncertainty quantification. Our results demonstrate that this model achieves high predictive accuracy and reliable uncertainty estimates, establishing it as a powerful and efficient surrogate for radiative transfer simulations.
BibTeX
@misc{seyedheydari2025conditional,
  author = {Fahime Seyedheydari and Kevin Conley and Simo Särkkä},
  title = {{Conditional Normalizing Flow Surrogate for Monte Carlo Prediction of Radiative Properties in Nanoparticle-Embedded Layers}},
  year = {2025},
  eprint = {2508.19841},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2508.19841},
}
Figure