Abstract
In a dissipative quantum system, we report the dynamic mode decomposition (DMD) analysis of damped oscillation signals. We used a reflection-type pump-probe method to observe time-domain signals, including the coupled modes of long-lived longitudinal optical phonons and quickly damped plasmons (LOPC) at various pump powers. The Fourier transformed spectra of the observed damped oscillation signals show broad and asymmetric modes, making it difficult to evaluate their frequencies and damping rates. We then used DMD to analyze the damped oscillation signals by precisely determining their frequencies and damping rates. We successfully identified the LOPC modes. The obtained frequencies and damping rates were shown to depend on the pump power, which implies photoexcited carrier density. We compared the pump-power dependence of the frequencies and damping rates of the LOPC modes with the carrier density dependence of the complex eigen-energies of the coupled modes by using the non-Hermitian phenomenological effective Hamiltonian. Good agreement was obtained between the observed and calculated dependences, demonstrating that DMD is an effective alternative to Fourier analysis which often fails to estimate effective damping rates.
Introduction
In the study of quantum mechanics, traditional models often assume Hermitian systems where energy is conserved. However, real-world physical systems are inherently dissipative, losing energy to their environment and resulting in damped oscillations. Analyzing these oscillations is critical for understanding material properties, yet the standard tool—the Fourier Transform (FT)—faces significant limitations. Because FT represents signals as sums of infinite sine waves, exponentially damped signals appear as broad, asymmetric peaks. This blurring makes it difficult to extract precise frequencies and nearly impossible to determine damping rates, especially for complex phenomena like the Longitudinal Optical Phonon–Plasmon Coupled (LOPC) mode.
Experimental Methods and Data Collection
To address these challenges, we employed ultra-fast pump-probe spectroscopy on n-type GaAs semiconductors (doping: $3 \times 10^{17} \text{ cm}^{-3}$). Using 80-femtosecond laser pulses, we excited the sample and measured the resulting change in reflectivity ($\Delta R/R_0$) over time. By varying the pump power, we generated different photoexcited carrier densities ($n_{exc}$), ranging from $1.91 \times 10^{17}$ to $7.63 \times 10^{17} \text{ cm}^{-3}$.
As shown in the experimental data, the time-domain signals exhibit complex oscillations that decay rapidly. The corresponding Fourier spectra (Figure 2b) reveal broad features where the Lower Branch (LB) and Upper Branch (UB) of the LOPC mode are difficult to distinguish from noise or the dominant LO phonon peak.
Dynamic Mode Decomposition (DMD) Analysis
We applied Dynamic Mode Decomposition (DMD) to the time-series data. Unlike Fourier analysis, DMD decomposes data into modes that naturally include exponential growth or decay. This allows for the extraction of "complex energies," where the real part represents frequency and the imaginary part represents the damping rate.
DMD successfully identified the hidden Upper Branch (UB) which was invisible in the standard Fourier spectrum. By treating damping as a primary characteristic rather than a distortion, DMD separated the signal into three distinct components: the Lower Branch (LB), the Upper Branch (UB), and the pure LO phonon mode. The extracted damping rates—approximately 0.35 THz for the UB and 0.57 THz for the LB—showed excellent agreement with theoretical predictions from a non-Hermitian phenomenological effective Hamiltonian.
Conclusion
Our results demonstrate that DMD is a superior alternative to Fourier analysis for studying dissipative quantum systems. By accurately capturing both frequencies and damping rates, DMD provides a clearer picture of electron scattering and lattice vibrations in semiconductors. This methodology opens new avenues for ultrafast spectroscopy to reveal hidden dynamics in other complex materials, such as superconductors and excitonic systems. Future work will focus on improving time resolution and refining parameter estimations to further enhance the precision of this data-driven approach.
Summary updated