Abstract
The ability to efficiently absorb thermal radiation within a small material volume is crucial for the realization of compact and high spatial resolution thermal imagers. Here we propose and experimentally demonstrate a compact plasmonic metasurface for broadband absorption in the 6 to 14 microns wavelength range. As opposed to previous works, our metasurface leverages strongly localized electromagnetic modes to achieve high absorption within a compact form factor. We numerically investigate the spectral response of finite arrays of fractals and show that the absorption enhancement provided by arrays with greater than 6x6 fractals covering a total area of only 30x30 microns squared is similar to that of an infinitely periodic array. Furthermore, we experimentally validate our metasurface's absorption enhancement and demonstrate a good qualitative agreement between the measured and simulated spectral responses. Owing to its ability to achieve broadband absorption enhancement in a compact footprint, our metasurface provides new avenues for the realization of next generation infrared sensors and bolometers.
Introduction
Thermal sensing is a cornerstone technology for applications ranging from defense surveillance to medical diagnostics and agricultural monitoring. Modern thermal imaging systems primarily rely on microbolometers, which detect infrared radiation by measuring changes in electrical resistance caused by absorbed heat. To achieve higher spatial resolution and faster response times, there is a pressing need to reduce the pixel size of these detectors.
While photonic metamaterials have enabled the creation of ultra-thin thermal absorbers, most existing broadband designs rely on delocalized electromagnetic modes. These modes extend over multiple unit cells, requiring a large lateral footprint to function effectively. This inherent spatial requirement limits the miniaturization of individual pixels. In this work, we address this challenge by designing a plasmonic metasurface that utilizes strongly localized modes, maintaining high broadband absorption even within a microscopic footprint.
Metasurface Design and Fabrication
The proposed absorber follows a metal-insulator-metal (MIM) architecture. It features an 800 nm thick layer of lossy, non-stoichiometric silicon nitride ($\text{SiN}_x$) as the dielectric spacer. This layer is sandwiched between a 300 nm thick Platinum (Pt) back reflector and a top layer of 3rd-generation Gosper fractal resonators (60 nm thick Pt). The unit cell has a period of 5 µm.
The complex geometry of the Gosper fractal is specifically chosen to strongly localize the electric field within the gaps of the metallic segments. This localization minimizes field leakage into adjacent cells, which is the key to achieving high performance in small finite arrays. Fabrication involved electron-beam evaporation for the Pt layers, Plasma-Enhanced Chemical Vapor Deposition (PECVD) for the $\text{SiN}_x$, and 100kV electron-beam lithography for patterning the intricate fractal structures.
Performance and Scaling
The metasurface achieves broadband absorption across the 6–14 µm range through two complementary mechanisms. The fractal array drives high absorption at shorter wavelengths (below 10 µm), while the intrinsic material losses of the $\text{SiN}_x$ layer dominate the absorption between 12 and 14 µm. Simulations of an infinite array predict a peak absorptivity of nearly 1.0 at 6.32 µm and a spectral average of 71%.
A critical finding of this study is the rapid saturation of absorption performance as the array size increases. By simulating and measuring finite $N \times N$ arrays, we demonstrated that the spectrally averaged absorption ($A_{\text{mean}}$) increases and then plateaus.
As shown in the figure above, an array as small as 6x6 (30x30 µm²) performs nearly as well as an infinite periodic array. Experimental results closely follow the simulated trends, confirming that ultra-compact pixels are viable without sacrificing efficiency. The slight discrepancy in $A_{\text{mean}}$ for smaller arrays is attributed to fabrication imperfections like sidewall roughness, which may enhance inter-fractal coupling.
Conclusion
We have successfully demonstrated a compact plasmonic fractal metasurface capable of efficient broadband thermal absorption. By leveraging localized electromagnetic modes, we have shown that high performance can be maintained in footprints as small as 30x30 µm². This approach overcomes the miniaturization limits of traditional delocalized metasurfaces, offering a promising path toward the next generation of high-resolution, high-speed infrared sensors and microbolometers.
Summary updated