Classical potential describes martensitic phase transformations between the<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>α</mml:mi></mml:math>,<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>β</mml:mi></mml:math>, and<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>ω</mml:mi></mml:math>titanium phases

Richard G. Hennig, Thomas J. Lenosky, Dallas R. Trinkle, Sven P. Rudin, John W. WilkinsPhysical 2008 · DOI · arXiv

Abstract

A description of the martensitic transformations between the $\alpha$, $\beta$, and $\omega$ phases of titanium that includes nucleation and growth requires an accurate classical potential. Optimization of the parameters of a modified embedded atom potential to a database of density-functional calculations yields an accurate and transferable potential as verified by comparison to experimental and density-functional data for phonons, surface and stacking fault energies, and energy barriers for homogeneous martensitic transformations. Molecular-dynamics simulations map out the pressure-temperature phase diagram of titanium. For this potential the martensitic phase transformation between $\alpha$ and $\beta$ appears at ambient pressure and 1200 K, between $\alpha$ and $\omega$ at ambient conditions, between $\beta$ and $\omega$ at 1200 K and pressures above 8 GPa, and the triple point occurs at 8 GPa and 1200 K. Molecular-dynamics explorations of the kinetics of the martensitic $\alpha$-$\omega$ transformation show a fast moving interface with a low interfacial energy of 30 meV/Ų.

Introduction

Titanium (Ti) is a critical material in aerospace and biomedical engineering due to its high strength-to-weight ratio and biocompatibility. Its performance is dictated by its complex phase behavior, specifically the transitions between the $\alpha$ (hcp), $\beta$ (bcc), and $\omega$ (hexagonal) phases. These transformations are often martensitic, involving rapid, coordinated atomic movements faster than the speed of sound. Understanding these processes at the atomic scale requires computational tools that balance the accuracy of quantum mechanics with the efficiency of classical mechanics. While Density Functional Theory (DFT) provides high accuracy, it is limited to small systems. This work bridges the gap by developing a highly accurate classical potential capable of simulating millions of atoms.

Methodology

The researchers developed a Modified Embedded Atom Method (MEAM) potential optimized via a force-matching approach against a comprehensive DFT database. A key innovation is the use of flexible cubic splines for the functional forms, allowing the potential to capture the intricate energy landscapes of Ti more accurately than standard analytical forms. The database included bulk phases, transformation pathways (such as the route from $\alpha$ to $\omega$), and various defect configurations. Once optimized, the potential was validated against experimental phonon spectra and used in molecular dynamics (MD) simulations to explore phase stability and transformation kinetics.

Phase Stability and Energy Landscapes

A primary goal was to accurately describe the relative stability of the $\alpha, \beta,$ and $\omega$ phases. The potential predicts that at 0 K and ambient pressure, the $\omega$ phase is the ground state, being slightly more stable than $\alpha$ by approximately 5 meV/atom. This finding supports the theoretical view that the $\alpha$ phase is stabilized by entropy at higher temperatures.

Energy-volume curves for the $\alpha$, $\beta$, and $\omega$ phases (a) and the enthalpy difference between $\alpha$ and $\omega$ as a function of pressure (b).

Vibrational Properties and Validation

To validate the potential, the researchers calculated phonon dispersion curves for all three phases. Phonons represent the vibrational fingerprint of a crystal and serve as a sensitive test of a potential's accuracy. The MEAM results show excellent agreement with both experimental data and DFT-GGA calculations, particularly for the acoustic branches. Notably, the potential captures the "soft modes" in the $\beta$ phase, which are precursors to phase instability and the subsequent transformation into the $\omega$ phase.

Phonon frequency dispersions for the $\alpha$, $\omega$, and $\beta$ phases, comparing the MEAM potential results with experimental data and GGA calculations.

Phase Diagram and Interface Kinetics

MD simulations successfully mapped the Ti pressure-temperature phase diagram. The predicted triple point, where $\alpha, \beta,$ and $\omega$ coexist, occurs at 8 GPa and 1200 K, showing excellent agreement with experimental data. Furthermore, explorations of the $\alpha$-$\omega$ transformation kinetics revealed a highly mobile interface with a low interfacial energy of approximately 30 meV/Ų. This low energy barrier explains the rapid nature of martensitic transformations in titanium.

Conclusion

The developed spline-based MEAM potential provides a robust and transferable tool for studying titanium. While it shows some discrepancies in high-frequency optical phonons and the extreme vibrational complexity of the $\beta$ phase near melting, its overall performance is a significant advancement. The potential's ability to accurately describe phase stability and transformation kinetics makes it suitable for investigating complex phenomena such as defect-mediated nucleation and the behavior of Ti under extreme conditions.

Summary updated

Abstract

A description of the martensitic transformations between the $\ensuremath{\alpha}$, $\ensuremath{\beta}$, and $\ensuremath{\omega}$ phases of titanium that includes nucleation and growth requires an accurate classical potential. Optimization of the parameters of a modified embedded atom potential to a database of density-functional calculations yields an accurate and transferable potential as verified by comparison to experimental and density-functional data for phonons, surface and stacking fault energies, and energy barriers for homogeneous martensitic transformations. Molecular-dynamics simulations map out the pressure-temperature phase diagram of titanium. For this potential the martensitic phase transformation between $\ensuremath{\alpha}$ and $\ensuremath{\beta}$ appears at ambient pressure and 1200 K, between $\ensuremath{\alpha}$ and $\ensuremath{\omega}$ at ambient conditions, between $\ensuremath{\beta}$ and $\ensuremath{\omega}$ at 1200 K and pressures above 8 GPa, and the triple point occurs at 8 GPa and 1200 K. Molecular-dynamics explorations of the kinetics of the martensitic $\ensuremath{\alpha}\text{\ensuremath{-}}\ensuremath{\omega}$ transformation show a fast moving interface with a low interfacial energy of $30\text{ }\text{meV}/{\text{\AA{}}}^{2}$. The potential is applicable to the study of defects and phase transformations of Ti.
BibTeX
@inproceedings{hennig2008classical,
  author = {Richard G. Hennig and Thomas J. Lenosky and Dallas R. Trinkle and Sven P. Rudin and John W. Wilkins},
  title = {{Classical potential describes martensitic phase transformations between the<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>α</mml:mi></mml:math>,<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>β</mml:mi></mml:math>, and<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>ω</mml:mi></mml:math>titanium phases}},
  booktitle = {Physical},
  year = {2008},
  doi = {10.1103/physrevb.78.054121},
}
Figure