Cavity State Manipulation Using Photon-Number Selective Phase Gates

Reinier Heeres, Brian Vlastakis, Eric C. Holland, Stefan Krastanov, Victor V. Albert, Luigi Frunzio, Liang Jiang, Robert SchoelkopfPhysical 2015 · DOI · arXiv

Abstract

The large available Hilbert space and high coherence of cavity resonators make these systems an interesting resource for storing encoded quantum bits. To perform a quantum gate on this encoded information, however, complex nonlinear operations must be applied to the many levels of the oscillator simultaneously. In this work, we introduce the selective number-dependent arbitrary phase (SNAP) gate, which imparts a different phase to each Fock-state component using an off-resonantly coupled qubit. We show that the SNAP gate allows control over the quantum phases by correcting the unwanted phase evolution due to the Kerr effect. Furthermore, by combining the SNAP gate with oscillator displacements, we create a one-photon Fock state with high fidelity. Using just these two controls, one can construct arbitrary unitary operations, offering a scalable route to performing logical manipulations on oscillator-encoded qubits.

Introduction

In the development of scalable quantum hardware, harmonic oscillators such as microwave cavities offer significant advantages over traditional two-level qubits, including larger Hilbert spaces and superior coherence times. However, the inherent linearity of these oscillators makes it challenging to address specific quantum states without affecting others. To achieve universal control, a controllable nonlinearity is required. This research introduces the Selective Number-dependent Arbitrary Phase (SNAP) gate, a method for manipulating the phase of individual photon-number states using a superconducting transmon qubit coupled to a high-purity cavity.

The SNAP Gate Mechanism

The SNAP gate operates within a circuit Quantum Electrodynamics (cQED) architecture in the "number-split" regime. In this regime, the qubit's transition frequency shifts significantly based on the exact number of photons ($n$) present in the cavity. This allows for selective interaction with specific Fock states.

Figure 1: (a) Qubit spectroscopy showing peaks for different photon numbers. (b-d) Visualization of phase manipulation on the Bloch sphere. (e) Quantum circuit diagrams for the SNAP gate and associated measurements.

As illustrated in Figure 1, the gate imparts a geometric phase to a chosen Fock state $|n\rangle$ by driving the qubit through a closed loop on the Bloch sphere. By applying two $\pi$-pulses at a frequency corresponding to $n$ photons, the qubit is moved through a trajectory that encloses a solid angle, resulting in a phase shift for that specific cavity component while the qubit returns to its ground state. This process effectively disentangles the qubit from the cavity, protecting the cavity's quantum state from qubit relaxation.

Correcting the Kerr Effect

A primary application of the SNAP gate is the correction of hardware imperfections, specifically the Kerr effect. In high-coherence cavities, the Kerr effect causes the quantum state to "twist" or spread in phase space over time, leading to state distortion. The researchers demonstrated that the SNAP gate can be used to periodically "untwist" the state by applying precise, compensatory phase shifts.

Figure 5: Wigner tomography showing (a) an initial coherent state, (b) the state after 1 μs of Kerr evolution, and (c) the state after applying a SNAP gate for Kerr correction.

As shown in Figure 5, Wigner tomography confirms the successful restoration of a coherent state distorted by Kerr evolution, achieving a fidelity of $F = 0.97$. This demonstrates the gate's utility as a high-precision tool for maintaining quantum state integrity.

Key Results and Future Directions

Beyond Kerr correction, the study demonstrated the deterministic creation of a $|1\rangle$ Fock state with a fidelity of $F = 0.90$ by alternating SNAP gates with cavity displacements. Furthermore, the SNAP gate proved to be a powerful diagnostic tool, enabling the measurement of Hamiltonian parameters—such as dispersive shifts and Kerr constants—with unprecedented precision.

While current gate fidelity is limited by qubit decoherence (infidelity of ~4% per step), future work will focus on optimizing pulse shapes for faster gate operation and scaling the architecture to multi-cavity systems. The SNAP gate provides a versatile framework for performing the complex logical manipulations required for advanced quantum error correction codes, such as cat or GKP codes.

Summary updated

Abstract

The large available Hilbert space and high coherence of cavity resonators make these systems an interesting resource for storing encoded quantum bits. To perform a quantum gate on this encoded information, however, complex nonlinear operations must be applied to the many levels of the oscillator simultaneously. In this work, we introduce the selective number-dependent arbitrary phase (snap) gate, which imparts a different phase to each Fock-state component using an off-resonantly coupled qubit. We show that the snap gate allows control over the quantum phases by correcting the unwanted phase evolution due to the Kerr effect. Furthermore, by combining the snap gate with oscillator displacements, we create a one-photon Fock state with high fidelity. Using just these two controls, one can construct arbitrary unitary operations, offering a scalable route to performing logical manipulations on oscillator-encoded qubits.
BibTeX
@inproceedings{heeres2015cavity,
  author = {Reinier Heeres and Brian Vlastakis and Eric C. Holland and Stefan Krastanov and Victor V. Albert and Luigi Frunzio and Liang Jiang and Robert Schoelkopf},
  title = {{Cavity State Manipulation Using Photon-Number Selective Phase Gates}},
  booktitle = {Physical},
  year = {2015},
  doi = {10.1103/physrevlett.115.137002},
}
Figure