Introduction
Building dynamic legged robots capable of running and jumping requires a delicate balance between strength, weight, and efficiency. Traditional transmission systems, such as Harmonic Drives and planetary gears, often serve as the primary bottleneck. While precise, Harmonic Drives are heavy and inefficient due to internal friction. Planetary gears, on the other hand, are prone to backlash and damage from high-velocity impacts during foot strikes. Furthermore, distributing heavy motors and gears along the leg increases inertia, hindering fast movements. Researchers at ETH Zurich addressed these challenges by developing Capler-Leg, a robotic limb that replaces heavy gearboxes with a high-performance cable-pulley system.
Methods
The Capler-Leg is a two-joint planar robotic limb designed to be nearly frictionless and backlash-free. Its core innovation lies in a single-stage cable-pulley transmission using Dyneema DM20, a synthetic fiber cable known for its high strength and negligible creep. By mounting the motors at the hip, the moving mass of the leg is significantly reduced.
To maximize weight savings, pulley grooves are machined directly into the structural links and motor housing, which also functions as a heat sink. The system utilizes "eye-splice" terminations for cable reliability and employs a Virtual Model Controller (VMC) for the stance phase alongside Inverse Dynamic Control (IDC) for the flight phase.
Key Insights
The design achieves an unprecedented active weight ratio, where the power-producing components (stators and rotors) constitute over 60% of the total leg weight. This high transparency allows the motor to "feel" ground interactions perfectly, enabling accurate force control without dedicated foot sensors. Additionally, the system's efficiency allows it to act as a generator during landing, pushing mechanical energy back into the battery—a concept described as "the battery as a spring." Despite skepticism regarding synthetic fibers, the system proved durable, surviving 0.5 million hopping cycles without re-tensioning.
Key Results
The Capler-Leg demonstrated exceptional performance across several metrics:
- Energy Efficiency: A staggering 96.5% energy recuperation rate was achieved during jumping cycles.
- Dynamic Capability: The 4kg leg successfully jumped 1.5 meters with an additional 2kg payload, outputting nearly 5,000 W of power.
- Control Fidelity: The system maintained accurate open-loop force tracking up to 30 Hz, essential for reacting to sudden terrain changes.
Limitations and Future Work
Despite its success, the system faces thermal constraints, as Dyneema DM20 deteriorates above 80°C. While integrated heat sinking helps, this may limit performance in extreme environments. Future iterations must also address the transition from a 2D planar prototype to a 3D quadruped, which involves more complex cable routing for hip abduction and adduction. Additionally, formal environmental sealing for real-world deployment remains a subject for future research.
Summary updated