Broadband resonances in ITO nanorod arrays

Shiqiang Li, Kazuaki Sakoda, J. B. Ketterson, Robert P. H. ChangarXiv 2014 · DOI · arXiv

Abstract

In the nanophotonics community, there is an active discussion regarding the origin of the selective absorption/scattering of light by the resonances with nanorod arrays. Here we report a study of the resonances in ordered indium-tin-oxide (ITO) nanorod arrays resulted from the waveguide modes. We discover that with only 2.4% geometrical coverage, the micron-length nanorod arrays strongly interact with light across an extra-wide band from visible to mid-infrared resulting in less than 10% transmission. Simulations show excellent agreement with our experimental observation. Near-field profile obtained from simulation reveals the electric field is mainly localized on the surfaces of the nanorods at all the resonances. Theoretical analysis is then applied to explain the resonances and it was found that the resonances in the visible are different from those in the infrared. When the light arrives at the array, part of the light wave propagates through the free space in between the nanorods and part of the wave is guided inside the nanorods and the phase difference at the ends of the rod interactions forms the basis of the resonances in the visible region; while the resonances in the infrared are Fabry-Perot resonances of the surface guided waves between the two ends of the nanorods. The simple analytical formulae developed predict the spectral positions of these resonances well. This information can be used to design devices like wavelength-selective photodetector, modulators, and nanorod-based solar cells.

Introduction

Selective light interaction in nanorod arrays is a cornerstone of modern nanophotonics, yet the underlying physical mechanisms often remain obscured by complex material geometries and defects. This study utilizes Indium-Tin-Oxide (ITO) nanorods to provide a unified explanation for broadband resonances. ITO is particularly advantageous because its optical properties transition from dielectric-like in the visible spectrum to metallic-like in the infrared.

Permittivity of ITO as a function of wavelength, showing the transition from dielectric (positive real part) to metallic (negative real part) behavior around 1600 nm.

As shown in the permittivity plot, the real part of the permittivity crosses zero near 1.6 μm. This crossover dictates the dual-nature of the nanorod resonances across the visible and mid-infrared (MIR) regimes.

Methods and Characterization

Ordered arrays of single-crystalline ITO nanorods were fabricated using the Vapor-Liquid-Solid (VLS) growth method on yttria-stabilized zirconia (YSZ) substrates. The resulting arrays featured square cross-sections and high structural uniformity. Characterization was performed using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) to verify dimensions and crystallinity. Optical response was measured via transmission spectroscopy for the visible range and reflectance spectroscopy for the infrared. These experimental results were complemented by Finite-Element-Method (FEM) simulations to map electromagnetic field distributions and permittivity models based on the Drude model.

Results and Discussion

The ITO nanorod arrays exhibit intense light interaction across an exceptionally wide band, despite a low geometric coverage of only 2.4%. At resonance, the array can block over 90% of incident light.

Structural characterization and optical response of ITO nanorod arrays. (a, c) SEM and TEM images of the ordered arrays. (b) Transmission spectra in the visible range. (d) Reflectance spectra in the infrared range showing polarization sensitivity.

The study identifies two distinct physical mechanisms driving these resonances:

  • Visible Regime (Dielectric Waveguiding): In the visible spectrum, where ITO is a dielectric, resonances arise from phase interference. Light waves traveling through the nanorods and the surrounding air gaps acquire a phase difference; destructive interference occurs when this difference reaches $(2n-1)\pi$, leading to transmission minima.
  • Infrared Regime (Plasmonic Waveguiding): In the IR, ITO behaves as a metal. Resonances here are Fabry-Perot-like standing waves of surface plasmons. This is confirmed by the polarization sensitivity shown in the reflectance data, where only p-polarized light (aligned with the rod axis) excites the resonances.

In both regimes, the electric field is strongly localized on the nanorod surfaces, a feature highly beneficial for surface-sensitive applications like sensing or core-shell photovoltaics.

Conclusion

This work provides a comprehensive framework for understanding broadband resonances in nanorod arrays. By distinguishing between dielectric phase interference and plasmonic standing waves, the researchers have developed simple analytical formulas that accurately predict resonant wavelengths. These insights pave the way for the design of high-efficiency, wavelength-selective nanophotonic devices, including photodetectors and modulators.

Summary updated

Abstract

In the nanophotonics community, there is an active discussion regarding the origin of the selective absorption/scattering of light by the resonances with nanorod arrays. Here we report a study of the resonances in ordered indium-tin-oxide (ITO) nanorod arrays resulted from the waveguide modes. We discover that with only 2.4% geometrical coverage, the micron-length nanorod arrays strongly interact with light across an extra-wide band from visible to mid-infrared resulting in less than 10% transmission. Simulations show excellent agreement with our experimental observation. Near-field profile obtained from simulation reveals the electric field is mainly localized on the surfaces of the nanorods at all the resonances. Theoretical analysis is then applied to explain the resonances and it was found that the resonances in the visible are different from those in the infrared. When the light arrives at the array, part of the light wave propagates through the free space in between the nanorods and part of the wave is guided inside the nanorods and the phase difference at the ends of the rod interactions forms the basis of the resonances in the visible region; while the resonances in the infrared are Fabry-Perot resonances of the surface guided waves between the two ends of the nanorods. The simple analytical formulae developed predict the spectral positions of these resonances well. This information can be used to design devices like wavelength-selective photodetector, modulators, and nanorod-based solar cells.
BibTeX
@misc{li2014broadband,
  author = {Shiqiang Li and Kazuaki Sakoda and J. B. Ketterson and Robert P. H. Chang},
  title = {{Broadband resonances in ITO nanorod arrays}},
  year = {2014},
  eprint = {1411.3767},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1411.3767},
}

Loading related content...

Figure