Bonding Technology of Silicon rubber protective materials

Yulong Zhang, Siyu Wang, Chuan Xiao, Zhiming Zhang, Zisen Li, Jilong Li, Hongzhou Li, Lei Wang, Yong Bian, Qiang ZhouJournal of Physics Conference Series 2023 · DOI

Abstract

Silicone rubber (SR) materials play a crucial role in the field of mechanical impact protection technology. However, the adhesive stability between SR and various substrates in the actual application process is still a challenging task. The surface free energy of SR is about 19.9 $mJ/m^2$, which can directly lead to fall off and peel off during the application process. In the present study, a new type of bifunctional polyborosiloxane interfacial binder ($BSiO^{Vi}$) has been developed through a copolymerization method, resulting in a firm bond between SR and epoxy resin (EP) and metal substrates. One end organic group of $BSiO^{Vi}$ is fixed to the surface of the substrate and the other end organic group acts as an initiator of the SR matrix polymerization. The bonding strength macroscopically manifests as the cohesive failure of the silicone rubber protective material.

Introduction

Silicone rubber (SR) is a premier material for mechanical impact protection due to its flexibility and durability. However, it possesses a significant engineering drawback: it is notoriously difficult to bond to other surfaces. Because SR has an extremely low surface free energy (approximately 19.9 $mJ/m^2$), it tends to delaminate from substrates like steel or epoxy resin during use. This "interfacial stability" problem often leads to adhesive failure, where the protective coating simply detaches from the component it is meant to shield.

Methodology

To overcome this, researchers synthesized a novel interfacial binder called vinyl-functionalized polyborosiloxane ($BSiO^{Vi}$) using an aqueous sol-gel method.

Synthesis of the Molecular Bridge

The team reacted boric acid, glycidoxypropyltrimethoxysilane (GPMS), and a vinyl-terminated agent to create a bifunctional molecule. This molecule acts as a chemical bridge: one end features epoxy groups to anchor to the substrate, while the other features vinyl groups to integrate directly into the silicone rubber's polymer network during curing.

Figure 4: Chemical reaction scheme for the synthesis of the bifunctional BSiOVi binder.

Mechanical Testing

The bonding performance was evaluated using a tensile shear test. Specimens were prepared by coating epoxy resin and steel substrates with the $BSiO^{Vi}$ binder before pouring and curing the silicone rubber over the joint. The chemical integrity of the binder was confirmed using Fourier Transform Infrared spectroscopy (FT-IR) and Gel Permeation Chromatography (GPC).

Figure 3: Schematic of the tensile shear test specimen showing the bonded area between the silicone rubber (SR) and the substrate.

Key Results and Insights

The study revealed a massive boost in adhesion strength across different substrates:

  • Epoxy Resin: Bond strength jumped from 0.45 MPa (untreated) to over 5.2 MPa with the $BSiO^{Vi}$ binder.
  • Steel: Adhesion increased from 1.20 MPa to approximately 5.5 MPa.

Beyond the quantitative increase, the most significant insight was the shift in failure mode. In untreated samples, the bond failed at the surface (adhesive failure). With the new binder, the interface became so strong that the silicone rubber itself tore before the bond broke (cohesive failure). This indicates that the $BSiO^{Vi}$ binder successfully moved the weak point of the system away from the interface and into the bulk material.

Conclusion

The $BSiO^{Vi}$ binder provides a robust chemical solution to the adhesion challenges of silicone rubber. By incorporating boron into the siloxane backbone, the researchers created a stable, high-performance interface that outperforms standard coupling agents. Future research will need to address the long-term environmental durability of these bonds, such as their performance under extreme temperature cycling or high humidity.

Reference: Zhang, Y., et al. (2023). Bonding Technology of Silicon rubber protective materials. J. Phys.: Conf. Ser. 2478 042001.

Summary updated

Abstract

Abstract Silicone rubber (SR) materials play a crucial role in the field of mechanical impact protection technology. However, the adhesive stability between SR and various substrates in the actual application process is still a challenging task. The surface free energy of SR is about 19.9 mJ/m 2 , which can directly lead to fall off and peel off during the application process. In present study, a new type of bifunctional polyborosiloxane interfacial binder (BSiO Vi ) has been developed through a copolymerization method, resulting the firm bond between SR and epoxy resin (EP) and metal substrate. One end organic group of BSiO Vi fixed to the surface of the substrate and the other end organic group act as initiator of the SR matrixpolymerization. The bonding strength macroscopically manifests as the cohesive failure of the silicone rubber protective material.
BibTeX
@article{zhang2023bonding,
  author = {Yulong Zhang and Siyu Wang and Chuan Xiao and Zhiming Zhang and Zisen Li and Jilong Li and Hongzhou Li and Lei Wang and Yong Bian and Qiang Zhou},
  title = {{Bonding Technology of Silicon rubber protective materials}},
  journal = {Journal of Physics Conference Series},
  year = {2023},
  doi = {10.1088/1742-6596/2478/4/042001},
}
Figure