Abstract
Noise pollution significantly impacts human health and quality of life. This study developed FeNi-MOF@Al-FM composite materials for enhanced sound absorption and addressed limitations of traditional acoustic materials. FeNi-MOF@Al-FM composites were synthesized by loading FeNi-MOF onto aluminum foam metal (FM) substrates with various thicknesses (5-15 mm) and mass ratios (5-20%). Microscopic characterization confirmed the successful synthesis of hexagonal spindle-type FeNi-MOF structures. XRD analysis showed that nickel doping caused slight lattice changes while maintaining the crystal structure. FTIR identified characteristic functional groups, and XPS confirmed Fe-Ni co-doping with multiple nitrogen species. Acoustic testing revealed that sound absorption capacity increased with material thickness, with 15 mm composites performing best across all frequencies. At a fixed 5 mm thickness, increased FeNi-MOF loading significantly enhanced absorption, as 20% mass ratio composites achieved an absorption coefficient of 0.82 at 4000 Hz, representing a 3.7-fold improvement over unloaded samples. Absorption mechanisms were proposed: low-frequency resonance absorption (600 Hz) originating from microstructures between MOF and foam metal, and high-frequency porous absorption resulting from viscous/thermal dissipation within hierarchical pores. These findings establish structure-performance relationships for FeNi-MOF@Al-FM composites and demonstrate potential applications in noise control, architectural acoustics, and instrument vibration isolation.
Introduction
Noise pollution is a systemic health risk linked to cardiovascular disorders and cognitive impairment. While traditional materials like mineral wool and polymer foams are staples in noise control, they often struggle with narrow frequency response ranges, poor environmental stability, and excessive bulkiness. Researchers have developed a high-performance acoustic composite by "decorating" aluminum foam with bimetallic FeNi-based Metal-Organic Frameworks (MOFs). This hierarchical material achieves a 3.7-fold improvement in sound absorption over plain aluminum foam, reaching an absorption coefficient of 0.82 at 4000 Hz while maintaining a remarkably thin profile.
To achieve high absorption in thin layers, scientists are looking toward acoustic metamaterials. MOFs are particularly attractive because of their ultra-high specific surface area and tunable porosity. However, MOF powders are difficult to use in structural applications. This study addresses the challenge of integrating these high-surface-area "sponges" into a robust, scalable metallic framework (aluminum foam) to create a durable, high-efficiency broadband sound absorber.
Experimental Methods
The fabrication and characterization of the FeNi-MOF@Al-FM composites followed a multi-step approach:
- Synthesis: A modified solvothermal method was used to create bimetallic FeNi-MOF (MIL-88 type structure). The bimetallic nature allows for finer control over the crystal lattice and surface chemistry.
- Composite Fabrication: The MOF was loaded onto aluminum foam (Al-FM) substrates via an impregnation method, varying the thickness (5–15 mm) and the mass ratio of MOF to foam (5–20%).
- Characterization: SEM, XRD, XPS, and FTIR were used to confirm morphology, crystallinity, and chemical environments.
- Acoustic Testing: Sound absorption was measured using an impedance tube (100–4000 Hz) following the ASTM E1050-98 standard. The transfer function method was utilized to determine the ratio of reflected versus absorbed sound energy.
Results and Discussion
Hierarchical Dissipation Mechanisms
The material operates across three distinct length scales: millimeter-scale macropores in the aluminum foam, micrometer-scale voids between MOF particles, and nanometer-scale intrinsic pores within the MOF. This hierarchical structure creates a tortuous path, forcing sound waves to dissipate energy through viscous friction and thermal exchange. Doping the MOF with Nickel caused slight lattice distortions that improved the material's interaction with nitrogen species, enhancing surface-level dissipation.
Acoustic Performance
A 5 mm thick sample with 20% MOF loading achieved an absorption coefficient of 0.82 at 4000 Hz, more than double the performance of standard melamine foam of the same thickness. Increasing the total thickness to 15 mm provided the best overall broadband performance, particularly in the low-frequency range (100–1000 Hz), showing a 7.5-fold enhancement over plain foam.
The jump from 10% to 20% MOF loading yielded a 91% improvement in high-frequency absorption. This suggests a "critical loading amount" where the MOF particles form a continuous, high-dissipation network within the foam. Furthermore, at higher loadings, independent resonance modes from the MOF and foam merged into a single, stabilized resonance peak, indicating superior acoustic impedance matching.
Conclusion
This study demonstrates that FeNi-MOF@Al-FM composites can break the traditional "thickness rule" for sound absorbers, where high MOF loading compensates for reduced thickness by dramatically increasing internal surface area. While the study focused on frequencies up to 4000 Hz, future work should investigate performance at ultra-high frequencies and long-term environmental durability under humidity and mechanical stress. These composites show significant promise for applications in aerospace, automotive, and architectural noise control.
Summary updated