Bilayer Heterostructure Electrolytes Were Prepared by a UV-Curing Process for High Temperature Lithium-Ion Batteries

Qiankun Hun, Lingxiao Lan, Xuanan Lu, Qicheng Hu, Xinghua Liang, Yifeng Guo, Yujiang WangPolymers 2024 · DOI

TL;DR

This paper introduces a novel bilayer solid-state electrolyte (SSE) for high-temperature lithium-ion batteries, fabricated using a UV-curing process. By creating distinct layers optimized for cathode and anode interfaces, the electrolyte achieves improved ionic conductivity, electrochemical stability, and cycling performance, addressing key limitations of current SSEs.

What Problem Does This Paper Address?

Lithium-ion batteries (LIBs) are crucial for modern technology, but their safety and operational limits are often constrained by liquid electrolytes. These can lead to dendrite formation, short circuits, and thermal runaway. Solid-state electrolytes (SSEs) offer a promising solution due to their inherent safety and mechanical stability. However, current SSEs, including inorganic solid electrolytes (ISEs) and solid polymer electrolytes (SPEs), face challenges like low ionic conductivity at room temperature and high interfacial resistance, hindering their practical application, especially at elevated temperatures. This work aims to overcome these limitations by designing a sophisticated SSE structure that enhances ion transport and interfacial stability.

Methods

The researchers employed a dual-matrix concept to create a bilayer heterogeneous structure for their solid polymer electrolyte (SPE). This involved preparing two distinct polymer electrolyte membranes:

  • PAP (Polymer-Anode-facing Polymer): This layer, designed to interface with the anode, blends PVDF-HFP (poly(vinylidene fluoride)-hexafluoropropylene) with reduction-resistant PEO (poly(ethylene oxide)).
  • PEP (Polymer-Electrode-facing Polymer): This layer, facing the cathode, combines PVDF-HFP with oxidation-resistant PAN (polyacrylonitrile).

These membranes were synthesized using a UV-curing process. The optimal blending ratios for PVDF-HFP with PAN and PEO were determined to be 3:7, respectively, based on ionic conductivity measurements. The final bilayer electrolyte, PAP/PEP, was formed by combining these optimized layers.

Characterization techniques included:

  • Scanning Electron Microscopy (SEM) for morphology and cross-section analysis.
  • Energy-Dispersive X-ray Spectroscopy (EDS) for elemental mapping.
  • X-ray Diffraction (XRD) to analyze crystal structures and polymer-electrolyte interactions.
  • Thermogravimetric Analysis (TGA) for thermal stability assessment.
  • Fourier Transform Infrared Spectroscopy (FTIR) to investigate chemical interactions.
  • Electrochemical Impedance Spectroscopy (EIS) to measure ionic conductivity.
  • Linear Sweep Voltammetry (LSV) to determine the electrochemical window.
  • Chronoamperometry to measure the lithium-ion transference number (tLi+).
  • Battery performance testing (rate capability, cycling stability) using assembled LiFePO4/CPEs/Li coin cells.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of a novel electrolyte material and its performance in battery cells.

Key Insights and Ideas

  • The "Dual-Matrix" Advantage: The core innovation is the bilayer design. By creating separate layers tailored for the anode and cathode interfaces, the researchers could optimize for specific electrochemical conditions (reduction resistance at the anode, oxidation resistance at the cathode). This is a significant step beyond single-layer SPEs.
  • Synergistic Polymer Blending: The careful selection and blending of PVDF-HFP with PAN and PEO were crucial. PAN's oxidation resistance and PEO's reduction resistance, combined with PVDF-HFP's flexibility and amorphous nature, create a robust and conductive matrix.
  • UV-Curing for Scalability: The use of a UV-curing process suggests a potentially scalable and efficient method for fabricating these complex electrolytes, which is important for future commercialization.
  • Enhanced Interfacial Stability: The bilayer structure appears to significantly improve the interface between the electrolyte and the electrodes, reducing interfacial resistance and promoting uniform lithium-ion flux. This is critical for preventing dendrite formation and ensuring long cycle life.
  • High-Temperature Performance: The electrolyte demonstrates remarkable stability and performance at 60 °C, a key requirement for many demanding applications like electric vehicles.

Key Results

  • Ionic Conductivity: The bilayer PAP/PEP electrolyte achieved an ionic conductivity of 4.27 × 10<sup>-4</sup> S/cm at room temperature.
  • Lithium-Ion Transference Number (tLi<sup>+</sup>): A high tLi<sup>+</sup> of 0.68 was recorded, indicating efficient lithium-ion transport and reduced anion contribution.
  • Electrochemical Window: The electrolyte exhibits a wide electrochemical window of 4.5 V, suitable for high-voltage cathode materials.
  • Room Temperature Battery Performance (LiFePO4/CPEs/Li):
    • High initial discharge capacity: 168 mAh g<sup>-1</sup> at 0.1 C and 60 mAh g<sup>-1</sup> at 2 C.
  • Excellent cycling stability: 93.3% capacity retention after 100 cycles at 0.2 C.
  • High-Temperature Performance (60 °C):
    • Maintained a discharge capacity of 90 mAh g<sup>-1</sup> at 2 C.
  • Exceptional capacity retention: 97.4% after 100 cycles at 0.2 C.
  • Mechanical Strength: The PAP/PEP membrane showed a tensile strength of 6.65 MPa, contributing to its ability to suppress dendrite growth.

Limitations and Future Work

  • Activation Energy: While the activation energy for PAP/PEP was found to be lower than individual components (0.29 eV), further optimization to reduce it even further could enhance performance at lower temperatures.
  • Material Cost and Scalability: While UV-curing is promising, the overall cost and large-scale manufacturing feasibility of the specific polymer blends and additives would need further investigation.
  • Long-Term Cycling at Extreme Conditions: While performance at 60°C is impressive, testing under even more extreme temperature variations or higher current densities could reveal further insights.
  • Anode Compatibility: The study focused on LiFePO4 cathodes. Future work could explore the compatibility of this electrolyte with other advanced cathode materials and different anode types (e.g., silicon anodes).
  • Interface Engineering: While the bilayer design is effective, further in-depth studies on the specific chemical and electrochemical interactions at the interfaces could lead to even more refined designs.

Summary updated

Abstract

Solid-state electrolytes are widely anticipated to revitalize high-energy-density and high-safety lithium-ion batteries. However, low ionic conductivity and high interfacial resistance at room temperature pose challenges for their practical application. In this work, the dual-matrix concept is applied to the design of a bilayer heterogeneous structure. The electrolyte in contact with the cathode blends PVDF-HFP and oxidation-resistant PAN. In contrast, the electrolyte in contact with the anode blends PVDF-HFP and reduction-resistant PEO. A UV-curing process was used to fabricate the bilayer heterostructure electrolyte. The heterostructure electrolyte exhibits an ionic conductivity of 4.27 × 10<sup>-4</sup> S/cm and a Li<sup>+</sup> transference number of 0.68 at room temperature. Additionally, when assembled into LiFePO<sub>4</sub>/CPEs/Li batteries, it shows a high initial discharge capacity at room temperature (168 mAh g<sup>-1</sup> at 0.1 C and 60 mAh g<sup>-1</sup> at 2 C), with a capacity retention of 93.3% after 100 cycles at a current density of 0.2 C. Notably, at 60 °C, the battery maintains a discharge capacity of 90 mAh g<sup>-1</sup> at 2 C, with a capacity retention of 97.4% after 100 cycles at 0.2 C. Therefore, solid-state batteries using this bilayer heterogeneous structure electrolyte demonstrate promising performance, including effective capacity output and cycling stability.
BibTeX
@inproceedings{hun2024bilayer,
  author = {Qiankun Hun and Lingxiao Lan and Xuanan Lu and Qicheng Hu and Xinghua Liang and Yifeng Guo and Yujiang Wang},
  title = {{Bilayer Heterostructure Electrolytes Were Prepared by a UV-Curing Process for High Temperature Lithium-Ion Batteries}},
  booktitle = {Polymers},
  year = {2024},
  doi = {10.3390/polym16212972},
}
Figure