Biaxial Fatigue Loading System for Electromagnetic Excitation of Wind Turbine Blades

Ying He, Lei Liu, Hao Zhou, Xinshua ChuScientific 2022 · DOI

Abstract

Based on the shortcomings of current detection methods for wind power blades, an electromagnetic excitation biaxial fatigue loading system is designed. The loading method utilizes the principle of electromagnetic actuators, primarily composed of electromagnet cores and coils. By controlling electromagnetic force, the system induces blade vibration at its natural frequency. This dual-axis approach simultaneously applies forces in the waving and swaying directions, more accurately reflecting actual working conditions. Furthermore, the system features an improved mechanical clamping mechanism utilizing ball screws, timing belts, ratchets, and cams to achieve precise positioning and secure clamping without adding parasitic mass to the blade.

Introduction

Wind turbine blades are critical components that must withstand extreme environmental stresses over decades of operation. These massive structures are susceptible to fatigue-induced defects such as cracking, delamination, and "degumming." To ensure structural integrity, rigorous fatigue testing is mandatory. However, traditional testing methods often fall short. Uniaxial "pendulum resonance" systems only simulate force in a single plane, failing to capture the complex multi-directional stresses blades experience in the field. While hydraulic biaxial systems offer more realism, they are prohibitively expensive, mechanically complex, and often require mounting heavy equipment directly onto the blade. This "parasitic mass" can significantly alter the blade's vibration characteristics, leading to inaccurate fatigue data.

Methodology: Electromagnetic Biaxial Loading

The proposed system addresses these limitations through a non-contact electromagnetic excitation method. Instead of hydraulic cylinders or physical weights, the system employs electromagnet cores and coils to generate driving forces.

3D model of the proposed biaxial fatigue loading system showing the blade and support structure.

Biaxial Force Application

The system is designed to apply forces in two primary directions: waving (out-of-plane) and swaying (in-plane). By synchronizing electromagnetic pulses with the blade's natural frequency, the system achieves high-amplitude resonance. This resonance-based approach allows for high-stress testing with relatively low energy consumption.

Decoupled Loading Mechanism

A significant innovation of this design is that the loading mechanism is decoupled from the blade itself. By not mounting the actuators on the test specimen, the system eliminates the influence of the device's weight on the fatigue data, ensuring that the measured vibration response is purely a function of the blade's structural properties.

System Architecture and Key Innovations

The system integrates several mechanical subsystems to ensure precision and stability during high-frequency testing.

Flowchart illustrating the system components and the advantages of electromagnetic biaxial loading.

Advanced Clamping and Positioning

To accommodate full-scale testing, the system includes a transmission mechanism consisting of stepper motors and ball screws. This allows the loading assembly to move along the length of the blade, enabling multi-position monitoring and testing. The clamping mechanism itself uses V-shaped blocks and a cam-driven system. An integrated ratchet-and-pawl mechanism ensures that the clamp remains secure even under the intense vibrations required for fatigue testing.

Control and Efficiency

The system offers two modes of operation: one-way and two-way loading. While two-way symmetrical loading provides more work per cycle, it increases the switching frequency of the coils, leading to higher energy losses. The electromagnetic approach provides superior real-time controllability compared to hydraulic alternatives, allowing for precise adjustment of the loading frequency and amplitude.

Results and Advantages

The electromagnetic biaxial loading system offers several distinct advantages over traditional methods:

  1. Improved Accuracy: Simultaneous biaxial loading and the elimination of parasitic mass provide a more realistic simulation of service conditions.
  2. Enhanced Controllability: The use of electromagnetic actuators allows for high-precision, real-time adjustments to the loading parameters.
  3. Cost-Effectiveness: The system is simpler to install and maintain than large-scale hydraulic rigs, reducing the overall cost of blade certification.

Conclusion and Future Work

This research presents a robust framework for the next generation of wind turbine blade testing. By leveraging electromagnetic excitation, the system achieves a balance of accuracy, controllability, and mechanical simplicity. Future developments will focus on empirical validation through full-scale prototyping and the refinement of coil control logic to minimize energy losses during high-frequency symmetrical loading. Additionally, integrating advanced data processing will allow for more sophisticated life prediction models based on the high-fidelity vibration data generated by this system.

Summary updated

Abstract

Based on the shortcomings of the current detection methods for wind power blades, an electromagnetic excitation biaxial fatigue loading system is designed. The loading method mainly adopts the principle of electromagnetic actuators. The loading part is mainly composed of electromagnet cores and coils. The blades exert electromagnetic force to achieve blade vibration. The dual-axis loading can be more in line with the actual working conditions of the blade. Electromagnetic loading mechanisms are installed in the two directions of the blade's waving and swaying respectively, and the electromagnetic force is applied in the two directions of the blade's waving and swaying at the same time. Vibration frequency, so that the vibration reaches the natural frequency of the blade. In addition, the clamping mechanism of the blade is improved, and a mechanical clamping mechanism is designed, which comprehensively uses the ball screw, timing belt, ratchet and came to realize the positioning and clamping of the blade.
BibTeX
@inproceedings{he2022biaxial,
  author = {Ying He and Lei Liu and Hao Zhou and Xinshua Chu},
  title = {{Biaxial Fatigue Loading System for Electromagnetic Excitation of Wind Turbine Blades}},
  booktitle = {Scientific},
  year = {2022},
  doi = {10.54691/sjt.v4i7.1276},
}
Figure