Abstract
In many engineering applications, the level of nonlinear distortions in frequency response function (FRF) measurements is quantified using specially designed periodic excitation signals called random phase multisines and periodic noise. The technique is based on the concept of the best linear approximation (BLA) and allows one to check the validity of the linear framework with a simple experiment. Although the classical BLA theory can handle measurement noise only, in most applications the noise generated by the system—called process noise—is the dominant noise source. Therefore, there is a need to extend the existing BLA theory to the process noise case. In this paper, we study in detail the impact of the process noise on the BLA of nonlinear continuous-time systems operating in a closed loop. It is shown that the existing nonparametric estimation methods for detecting and quantifying the level of nonlinear distortions in FRF measurements are still applicable in the presence of process noise. All results are also valid for discrete-time systems and systems operating in open loop.
Introduction: The Challenge of Real-World Nonlinearity
In the real world, no system is perfectly linear. Engineers often rely on the Best Linear Approximation (BLA) to find the "closest" linear model to a nonlinear system for a specific operating point. However, classical BLA theory has historically faced two major limitations:
- Measurement vs. Process Noise: Most theories assume noise only occurs at the sensors (measurement noise). In reality, systems often generate their own internal "process noise" (e.g., turbulence in a pipe or thermal fluctuations in a circuit), which is frequently the dominant noise source.
- Feedback Loops: Many systems operate in closed loops. In these cases, noise and nonlinearities interact and circulate through the system, making it significantly harder to separate the "true" system behavior from the noise.
This paper bridges this gap by providing a rigorous theoretical foundation for BLA in continuous-time nonlinear systems that are both noisy "from the inside" and operating in feedback.
Methodology
The authors employ a combination of theoretical modeling and nonparametric estimation:
- Volterra Series Framework: Used to define the class of systems where BLA is applicable, specifically those with "fading memory" nonlinearities.
- Random Phase Multisines: The system is excited using signals composed of many harmonically related sines with random phases. These "Gaussian-like" signals are required for the BLA to be well-defined.
- Nonparametric Estimation: Robust and fast methods are used to estimate the BLA and its variance by measuring multiple periods of the system's response to different realizations of the multisine signal.
- Multiple Experiment Procedure: A novel procedure uses different excitation power levels to distinguish between Type I nonlinearities (direct input-output distortions) and Type II nonlinearities (complex interactions between the input signal and the process noise).
Experimental Validation
The theory was evaluated using both simulations and physical hardware:
- Simulated NFIR System: A nonlinear finite impulse response (NFIR) system in a feedback loop was used to verify mathematical proofs.
- Physical Electronic Circuit: A custom-built high-gain bandpass filter circuit featuring operational amplifiers and voltage-dependent resistors (LED-LDR pairs) introduced controlled nonlinearities and process noise.
Key Results and Insights
The research yielded several critical findings:
- The BLA is Robust: The most significant discovery is that the BLA of a system subject to process noise is identical to the BLA of a "noise-free" version of that same system. This confirms that engineers can trust linear approximations even in noisy environments.
- Noise as a Mask: Process noise can "hide" nonlinearities. If the noise is high enough, the system might appear linear because the nonlinear distortions are smaller than the noise variance.
- Type I vs. Type II Distortions: The paper distinguishes between distortions independent of noise (Type I) and those caused by the input signal "modulating" the noise (Type II). This is crucial for determining whether a problem lies in the core dynamics or noise handling.
In physical experiments, the authors demonstrated that increasing process noise caused a visible shift in the system's resonance frequency—a clear sign of nonlinear interaction that their framework was able to quantify and explain.
Limitations and Future Work
While robust, the theory relies on the process noise being a stationary Gaussian process. It also excludes systems with "hard" chaotic behavior, subharmonics, or bifurcations. Future work may extend this framework to assist in nonlinear model selection, using the BLA's dependence on the excitation spectrum to choose appropriate structures for complex nonlinear models.
Summary updated