Automatic Structured Mesh Generation Method for Airfoil Configuration Based on Parametric Multi-Block Topology

Meng Jiang, Zibin Zhao, Jianqiang Chen, Meiliang Mao, Yan SunApplied Sciences 2026 · DOI

TL;DR

This paper introduces a novel, fully automatic method for generating high-quality structured computational fluid dynamics (CFD) meshes for airfoils. By parameterizing the multi-block topology, the method can generate complex meshes for various airfoil shapes and configurations in seconds, significantly accelerating the CFD workflow.

What Problem Does This Paper Address?

Generating high-quality structured meshes for CFD simulations is a critical but notoriously time-consuming and expertise-intensive step. Traditional methods often require manual domain decomposition and parameter tuning, hindering rapid design iterations. While automated methods exist, they struggle with generating complex topologies and ensuring mesh quality across diverse airfoil shapes. This paper tackles the challenge of automating both the topology generation and mesh point distribution for structured meshes, specifically for airfoil configurations.

Methods

The core innovation lies in a parametric multi-block topology approach. Instead of manually defining the mesh structure, the method parameterizes the control vertices and edges that define the topology. This allows the system to automatically update the topology based on the airfoil's shape. Key techniques include:

  • Airfoil Shape Parameterization: Using Radial Basis Function (RBF) interpolation to create a mathematical model of the airfoil shape, allowing for easy retrieval of coordinates based on arc length.
  • Control Vertex Generation: Categorizing control vertices into three types (on airfoil surface, outer boundary of boundary layer, far-field boundary) and defining systematic methods for their placement based on airfoil geometry and CFD requirements.
  • Control Edge Generation: Constructing straight, body-fitted curvilinear, and spatial curvilinear edges using methods like scaled copying and RBF interpolation.
  • Mesh Size Setting Rules: Implementing a set of rules derived from numerical stability and accuracy requirements to ensure consistent mesh cell sizes at block interfaces and within blocks.
  • Node Distribution: Employing hyperbolic and duplication methods for node distribution on control edges.
  • Block Assembly and Mesh Generation: Using the Transfinite Interpolation (TFI) method to generate interior mesh nodes within each block, followed by assembling all blocks to form the final mesh.

Datasets

The paper uses standard airfoil geometries, specifically the NACA0012, NACA2210, NACA5214, and NACA23020, to demonstrate the method's capabilities. It also references experimental wind-tunnel test data for the NACA0012 airfoil for validation of CFD simulation results. No new datasets were introduced.

Key Insights and Ideas

  • Topology as a Parametric Construct: The most significant insight is treating the multi-block mesh topology itself as a parametric entity that can be automatically generated and adapted based on the geometry. This shifts the paradigm from manual decomposition to algorithmic generation.
  • Unified Approach for Diverse Airfoils: The method's ability to handle a wide range of airfoil shapes (symmetric, cambered, thin, thick) without manual intervention is a major breakthrough. This is achieved by parameterizing the topology generation process.
  • Efficiency Through Automation: The parametric nature and automated algorithms drastically reduce the time required for mesh generation, making it feasible for rapid design iterations and large-scale simulations.
  • High-Quality Meshes Guaranteed: The combination of parametric topology, rule-based mesh sizing, and robust generation techniques consistently produces high-quality meshes with excellent cell Jacobi values.

Key Results

  • Speed: An airfoil mesh with approximately 50 million nodes can be generated in less than ten seconds on a laptop.
  • Mesh Quality: Over 97% of mesh cells have a Jacobi value greater than 0.9, indicating high-quality, well-formed cells.
  • Robustness: The method successfully generated high-quality meshes for various airfoil shapes and topologies (O-H and C-H), including those with blunt and sharp trailing edges.
  • Validation: CFD simulations using the generated meshes for the NACA0012 airfoil showed good agreement with experimental wind-tunnel data for both steady and unsteady flow conditions, confirming the mesh's suitability for accurate aerodynamic analysis.
  • Scalability: The method demonstrated excellent scalability, with CPU time per million cells remaining relatively low even for very large meshes.

Limitations and Future Work

  • Limitations:
    • The current method is primarily focused on 2D airfoil configurations.
  • While robust for airfoils, extending the method to more complex 3D geometries (e.g., wings, compressor blades) will require further development.
  • The paper mentions that for very thin or very thick airfoils, some parameters might need adjustment, although the core automation is maintained.
  • Future Work:
    • Generalizing to 3D: Extending the parametric approach to 3D configurations is a primary future direction.
  • Integration with AI/ML: Exploring the use of machine learning for automatic topology optimization and intelligent parameter tuning to further enhance the automation and adaptability of the method.
  • Broader Applications: Applying the method to other aerodynamic applications like wings, compressor blades, and wind turbines.

Summary updated

Abstract

This paper reports on a fully automatic structured Computational Fluid Dynamics (CFD) mesh generation method based on a parametric multi-block topology for airfoil configurations. The method parameterizes the control vertices and the control edges, which construct the multi-block topology, and then assembles blocks with the control edges. Once the airfoil shape is determined, the topology is immediately updated based on the parameterization, and the CFD mesh of the airfoil is generated using transfinite interpolation. The present method is tested on airfoils with different topologies, shapes, and mesh sizes to check its robustness, efficiency, and quality. The test results show that the mesh of an airfoil of any shape can be generated automatically with high quality. In addition, an airfoil CFD mesh with about 50 million nodes can be automatically generated in less than ten seconds on a laptop, and the Jacobi of over 97% of the mesh cells is larger than 0.9. The flow simulation results for the NACA0012 airfoil agree well with the wind-tunnel test data, demonstrating the method’s applicability to CFD.
BibTeX
@inproceedings{jiang2026automatic,
  author = {Meng Jiang and Zibin Zhao and Jianqiang Chen and Meiliang Mao and Yan Sun},
  title = {{Automatic Structured Mesh Generation Method for Airfoil Configuration Based on Parametric Multi-Block Topology}},
  booktitle = {Applied Sciences},
  year = {2026},
  doi = {10.3390/app16021116},
}
Figure